Molex 63813-2100 Manuale utente

63813-2100 Modular Card Extractor Tool

Doc No. 63813-2100 Release Date: 05-10--06 UNCONTROLLED COPY Page 1 of 5

Revision: A Revision Date: 05-10-06

Module Card Extractor Tool

Instruction Manual

Part No. 63813-2100

FEATURES

This tool is designed for the removal of the memory module card from the metal latch 87814 series Molex sockets, 1mm pitch,

276-circuit vertical press-fit with metal latch DDR2.

SCOPE

Products: 87814 Series 276 Circuit Vertical Press-fit Metal Latch DDR2 Dimm Connector System. See Product List below for specific part

numbers.

Product List

The following is a partial list of the product order numbers and their specifications this tool is designed to run. Updates to this list are

available on www.molex.com.

Assembly Order Number Description

87814-1001

87814-1002

1.00mm (.039") Pitch DDR-2 DIMM Socket, Vertical,

Press-fit, 276 Circuits Metal Latch

DESCRIPTION

The 1mm pitch, 276-circuit vertical press-fit with metal latch DDR2

takes up a much smaller space inside the housing than a conventional

latch will. The entire connector length is almost similar to the module

card. However, the latch cannot be extracted by hand and this

extraction tool is required to withdrawal the module card from the

metal latch.

The Module Card Extractor Tool consists of modular card latch, metal

latch, and thumb pusher with a handle.

METAL LATCH PUSHER

Figure 1

THUMB PUSHER

MODULE CARD

LATCH

HANDLE

63813-2100 Modular Card Extractor Tool

Doc No. 63813-2100 Release Date: 05-10--06 UNCONTROLLED COPY Page 2 of 5

Revision: A Revision Date: 05-10-06

PCB BOARD

Figure 2

MODULE CARD

METAL

LATCH

PUSHER

METAL

LATCH

PUSHER MODULE HOUSING

MODULE CARD

LATCHES OPEN

METAL LATCH PUSHER

Figure 3

MODULE CARD

HOUSING

EXTRACTOR

TOOL

MODULE CARD

HOUSING

Figure 4

METAL LATCH

PUSHER

MODULE

CARD

MODULE CARD

LATCHES LOCKED

IN PLACE

LIFT UP BY

THE HANDLE

Operation

1. Align the metal latch pushers (2) with the slots on the module card housing. See Figure 2.

2. Push the extractor tool down and into the slots. The module card latches are spring-loaded and will open when extractor tool is

engaged in the module card housing. See Figure 3.

3. Make sure the extractor tool is firmly seated in the slots of the module card housing and the module card latches are locked into

the module card.

4. Pull the module card straight up with the handle of the extractor tool. See Figure 4.

63813-2100 Modular Card Extractor Tool

Doc No. 63813-2100 Release Date: 05-10--06 UNCONTROLLED COPY Page 3 of 5

Revision: A Revision Date: 05-10-06

Figure 5

MODULE CARD

LATCHES WILL

RELEASE

PUSH DOWN

ON THE THUMB

PUSHER

5. When the module card is free of the housing, press down on the thumb pusher. This will open the module card latches and release

the card from the extractor tool. See Figure 5.

Maintenance

It is recommended that each operator of the tool be made aware of, and responsible for, the following maintenance steps:

1. Remove dust, moisture, and other contaminants with a clean brush, or soft, lint free cloth.

2. Do not use any abrasive materials that could damage the tool.

3. Make certain all pins; pivot points and bearing surfaces are protected with a thin coat of high quality machine oil. Do not oil

excessively.

4. When tool is not in use, store in a clean, dry area.

CAUTION: Molex specifications are valid only when used with Molex terminals, applicators and tooling.

63813-2100 Modular Card Extractor Tool

Doc No. 63813-2100 Release Date: 05-10--06 UNCONTROLLED COPY Page 4 of 5

Revision: A Revision Date: 05-10-06

PARTS LIST

** Available from an industrial supply company such as MSC (1-800-645-7270).

Item Order No Description Quantity

63813-2100 Module Card Extractor Tool (Figure 6)

1 63813-2101 Extractor Base 1

2 63813-2102 Pusher Plate 1

3 63813-2103 Base Cover 1

4 63813-2204 Handle 1

5 63813-2205 Handle Shaft 1

6 63813-2206 Module Card Latch 2

7 63813-2207 Metal Latch Pusher 2

8 63600-2698 Knob 1

9 63600-2699 Metal Bushing 1

10 63600-2700 Compression Spring 1

11 63600-2701 Compression Spring 4

12 63600-2702 1.5mm Diameter Dowel Pin 2

13 63600-2703 M4 Screw Plug 4

14 63600-2704 M3 by 8 Long Low Head SHCS 2

15 N/A M2.5 by 10 Long SHCS **8

16 N/A M3 by 35 Long SHCS **2

17 N/A 4mm by 10 Long Dowel Pin **2

63813-2100 Modular Card Extractor Tool

Doc No. 63813-2100 Release Date: 05-10--06 UNCONTROLLED COPY Page 5 of 5

Revision: A Revision Date: 05-10-06

(2)

(8)

(2)

15 14

(2)

Figure 6

(4)

(2)

6 (2)

2 3

11 (4)

Assembly Drawing

Americas Headquarters

-JTMF*MMJOPJT64"

.0-&9

BNFSJOGP!NPMFYDPN

Far East North Headquarters

:BNBUP,BOBHBXB+BQBO



GFOJOGP!NPMFYDPN

Far East South Headquarters

+VSPOH4JOHBQPSF



GFTJOGP!NPMFYDPN

European Headquarters

.VOJDI(FSNBOZ



FVSJOGP!NPMFYDPN

Corporate Headquarters

8FMMJOHUPO$U

-JTMF*-64"



'BY

Visit our Web site at http://www.molex.com

Indice

Altri manuali molex Utensili per crimpatura

molex

molex 63825-9700 Manuale utente

molex

molex 63819-0500 Guida utente

molex

molex 200218-4500 Guida utente

molex

molex 63827-5000 Manuale utente

molex

molex 63811-8200 Manuale utente

molex

molex AT-1300 Manuale utente

molex

molex 63827-1600 Manuale utente

molex

molex 63825-5000 Manuale utente

molex

molex 63825-5500 Guida utente

molex

molex RHT-5771 Manuale utente

molex

molex 63827-1300 Manuale utente

molex

molex 35745 Series Manuale utente

molex

molex 207129 Series Manuale utente

molex

molex 207129 Series Manuale per l'uso e la cura

molex

molex 207129 Series Manuale utente

molex

molex 59354 Manuale utente

molex

molex 207129 Series Manuale utente

molex

molex 207129 Series Manuale utente

molex

molex 63827-0600 Manuale utente

molex

molex 63819-0900 Manuale utente

molex

molex 63823-4100 Manuale utente

molex

molex 207129 Series Manuale utente

molex

molex 207129 Series Manuale utente

molex

molex 50837 Manuale utente

Manuali Utensili per crimpatura popolari di altre marche

Panduit

Panduit CT-1000 Guida per l'amministratore

JST

JST CS 10 Manuale utente

Danfoss

Danfoss ET4200 Manuale utente

Tyco Electronics

Tyco Electronics PRO-CRIMPER III Manuale utente

TE Connectivity

TE Connectivity 2063528-1 Manuale utente

Tyco Electronics

Tyco Electronics 69156-1 Manuale utente

CRH

CRH CRL CBLHCT1 Manuale utente

Emerson

Emerson Klauke ES 105CFM Manuale utente

KIMBALL MIDWEST

KIMBALL MIDWEST 27-798 Manuale di istruzioni

Danfoss

Danfoss ET4350 Manuale utente

Milwaukee

Milwaukee M18 Manuale utente

HOGERT

HOGERT HT1P169 Manuale utente

Textron

Textron ESG105L Manuale utente

Tyco Electronics

Tyco Electronics 90035-3 Manuale utente

Emerson

Emerson Klauke ES 20RMCCFB Manuale utente

Continental Refrigerator

Continental Refrigerator PC150HD Manuale utente

TE Connectivity

TE Connectivity ERGOCRIMP 1-1579001-3 Manuale utente

Tyco Electronics

Tyco Electronics CERTI-CRIMP 90418-1 Manuale utente

molex 63813-2100 Manuale utente

Manuali Utensili per crimpatura popolari di altre marche