Monarch Renegade 9491 Istruzioni per l'installazione e il funzionamento
TC9491BT Rev. AC 11/00 ©1999 Monarch Marking Systems All Rights Reserved.
USING THE 9491™ BOOT KIT
The Monarch® Renegade® 4 printer’s boot protects it if you accidentally
drop it, hit it against something, or jar it in some other manner. Following
is an illustration of the boot on the printer.
Contents of the Boot Kit
The boot kit comes with:
♦the boot.
♦two knobs.
♦two white spacers to use with the knobs.
♦two black spacers and two screws (industrial version printer only).
2Using the 9491 Boot Kit
Putting the Boot on the Printer
To put the boot on the printer:
1. Industrial Version Only. Remove the cable from the side of the
printer. Save the cable’s screws for when you want to use the
printer without the boot.
2. Unscrew the screw assemblies at the top of the printer (either
shoulder strap is optional), and take them off. Save them for when
you want to use the printer without the boot.
3. Pull on the boot and fit it around the printer.
4. With Shoulder Strap Only. For both sides of the printer, put
together the knob assembly and screw it into the threaded insert.
Do not over-tighten the assembly.
Using the Old Strap Using the New Strap
White
Spacer
Using the 9491 Boot Kit 3
6. Industrial Version Only. Put together screw assemblies using the
longer screws. Then, replace the cable.
Taking the Boot off the Printer
To take the boot off the printer:
1. Industrial Version Only. Remove the cable from the side of the
printer. Save the spacers and longer screws for when you want to
use the printer with the boot.
2. With Shoulder Strap Only. Unscrew the knob assemblies on both
sides of the printer (including the shoulder strap, if used), and take
them off.
3. Pull on the boot and remove it from around the printer.
4. For both sides of the printer (at the top), put the screw assemblies
together (including either shoulder strap, if preferred), put them into
the threaded inserts and screw them in.
Do not over-tighten the assembly.
5. Industrial Version Only. Reattach the cable using the shorter
screws without the spacers.
Black Spacers
For supplies, service, or assistance,
call toll-free:
1-800-543-6650 (In the U.S.A.) or
1-800-263-4650 (In Canada)
www.monarch.com
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Monarch Accessori per stampanti
