Mono fusion compact Istruzioni operative
FUSION Compact Bread Plant, Rev. A21 13-04-21
BREAD PLANT
OPERATING AND MAINTENANCE MANUAL
DIVIDER
PROVER
MOULDER
compact
fusion
Enter Serial No’s here.
www.monoequip.com
FILE 132
FUSION Compact Bread Plant, Rev. A21 13-04-21
SAFETY SYMBOLS
The following safety symbols are used throughout this product documentation and manual
(available at www.monoequip.com).
Before using your new equipment, read the instruction manual carefully and pay special
attention to information marked with the following symbols.
IMPORTANT NOTES
DO NOT TRY TO DISABLE ANY SAFETY DEVICES,
THEY ARE FITTED FOR YOUR SAFETY.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
will result in electric shock.
Indicates a hazardous situation which, if not avoided,
will result in minor or moderate injury.
WARNING
WARNING
CAUTION
NOTE: DIVIDER OIL
DO NOT USE ORDINARY VEGETABLE OIL FROM SHOP SHELVES, IN THE DIVIDER
THIS WILL FORM A GUM-LIKE RESIDUE, CAUSING STICKING AND POSSIBLE
DAMAGE TO THE MACHINE.
MONO RECOMMENDS THE USE OF “CRODA SUPER WUNDROL”
(AVAILABLE FROM MONO. PART NUMBER “A900-25-272”)
FUSION Compact Bread Plant, Rev. A21 14-04-21 3
ELECTRICAL SAFETY AND ADVICE REGARDING
SUPPLEMENTARY ELECTRICAL PROTECTION
Commercial bakeries, kitchens and food service areas are environments where electrical appliances
may be located close to liquids, or operate in and around damp conditions, or where restricted
movement for installation and service is evident.
The installation and periodic inspection of the appliance should only be undertaken by a qualified,
skilled and competent electrician, and connected to the correct supply suitable for the load as
stipulated by the appliance data label.
The electrical installation and connections should meet the necessary requirements of the local
electrical wiring regulations and any electrical safety guidelines.
We Recommend:
Supplementary electrical protection with the use of a residual current device (RCD)
Fixed wiring appliances incorporate a locally situated switch disconnector to connect to, which is
easily accessible for switching off and safe isolation purposes. The switch disconnector must
meet the specification requirements of IEC 60947.
Your attention is drawn to:
BS 7671:2018 – Guidance Note 8 – 8.13 : Other locations of increased risk
It is recognised that there may be locations of increased risk of electrical shock other than those
specifically addressed in Part 7 of BS 7671. Examples of such locations could include laundries
where there are washing and drying machines in close proximity, and water is present, and
commercial kitchens with stainless steel units, where once again, water is present. Where, because
of the perception of additional risks being likely, the installation designer decides that an installation or
location warrants further protective measures, the options available includes:
Automatic Disconnection of Supply (ADS) by means of a residual current device having a
residual operating current not exceeding 30 mA;
Supplementary protective equipotential bonding; and
Reduction of maximum fault clearance time.
The provision of RCDs and supplementary bonding must be specified by the host organisation’s
appointed installation designer or electrical contractor and installed by a suitably qualified and
competent electrician so as to comply with Regulations 419.2 and 544.2.
The supply to this machine must be protected by a 30mA Type B RCD
FUSION Compact Bread Plant, Rev. A21 14-04-21 4
FUSION Compact Bread Plant, Rev. A21 14-04-21 5
SECTION 1 -BREAD PLANT ASSEMBLED
INSTALLATION (Prover – Divider – Moulder), CLEANING,
MAIN CONTROLS, AND BREAD PLANT OPERATION
SECTION 2-DOUGH DIVIDER
DETAILED MAIN INSTRUCTIONS
SECTION 3 - MOULDER
MAIN INSTRUCTIONS
FUSION Compact Bread Plant, Rev. A21 14-04-21 6
CONTENTS
SECTION 1 – BREAD PLANT ASSEMBLED
1.0 INTRODUCTION .......................... Description of plant ....................................... 10
2.0 GENERAL DIMENSIONS ............... Prover, Divider, and Moulder. ....................... 11
2a. Overall dimensions....................... Bread plant assembled ………… ........................ 12
3.0 SPECIFICATIONS............................. Power, weight, and noise level...................... 13
4.0 SAFETY ............................................... Precautions when using the equipment ........ 14
5.0 INSTALLATION.................................. General, Divider, Rounder, and Moulder........ 15
6.0 ISOLATION.............. Emergency stop; turning off for cleaning and servicing........ 20
7.0 CLEANING.................................................................................................................................. 21
Prover
Daily cleaning .............................................................................................................. 22
Weekly cleaning........................................................................................................... 23
Carrier pocket removal ................................................................................................ 23
Divider
Daily cleaning .............................................................................................................. 24
Weekly cleaning........................................................................................................... 27
Moulder
Daily cleaning .............................................................................................................. 28
Weekly cleaning........................................................................................................... 30
8.0 OPERATING INSTRUCTIONS............................................................................................. 31
a. Operation of the Prover ................................................................................................ 31
b. How to operate the Mono bread plant ........................................................................... 32
9.0 ELECTRICAL INFORMATION..... Wiring diagrams ...................................................... 34
PLEASE READ THESE MORE DETAILED SECTIONS BEFORE USING THIS PLANT
SECTION 2 - Dough divider
SECTION 3 - Moulder
FUSION Compact Bread Plant, Rev. A21 14-04-21 7
SECTION 2 - DOUGH DIVIDER
1.0 INTRODUCTION .................................................................................................. 39
2.0 GENERAL DIMENSIONS..................................................................................... 40
3.0 SPECIFICATIONS................................................................................................ 40
4.0 SAFETY................................................................................................................ 41
5.0 INSTALLATION.................................................................................................... 42
6.0 ISOLATION .......................................................................................................... 45
7.0 CLEANING ........................................................................................................... 45
Daily.............................................................................................................................. 45
Weekly .......................................................................................................................... 49
8.0 OPERATING......................................................................................................... 50
9.0 MAINTENANCE ................................................................................................... 53
10.0 TROUBLESHOOTING ......................................................................................... 55
11.0 SPARES AND SERVICE...................................................................................... 62
FOR SERVICE AND SPARES RING: 01792 564044
12.0 ELECTRICAL INFORMATION............................................................................. 63
FUSION Compact Bread Plant, Rev. A21 14-04-21 8
SECTION 3 – MOULDER
1.0 INTRODUCTION .................................................................................................. 70
2.0 OVERALL DIMENSIONS ..................................................................................... 70
3.0 SPECIFICATIONS................................................................................................ 71
4.0 SAFETY................................................................................................................ 72
5.0 INSTALLATION.................................................................................................... 73
6.0 ISOLATION .......................................................................................................... 74
7.0 CLEANING ........................................................................................................... 75
Daily.............................................................................................................................. 75
Weekly .......................................................................................................................... 77
8.0 OPERATING INSTRUCTIONS............................................................................. 78
9.0 TROUBLESHOOTING ......................................................................................... 82
10.0 SPARES AND SERVICE...................................................................................... 83
FOR SERVICE AND SPARES RING: 01792 564044
11.0 MOULDER ELECTRICAL INFORMATION.......................................................... 85
FUSION Compact Bread Plant, Rev. A21 14-04-21 9
BREADPLANT ASSEMBLED
SECTION 1
FUSION Compact Bread Plant, Rev. A21 14-04-21 10
1.0 INTRODUCTION
The Mono FUSION COMPACT bread plant is a fully integrated unit enabling rapid change
of product lines without moving any items of equipment.
It consists of three machines: The “DIVIDER”, the “PROVER” and the “MOULDER”.
DIVIDER
MOULDER
PROVER
Indice
Altri manuali Mono Attrezzature industriali
