Monoprice 21905 Manuale utente

MONOPRICE

Blackbird™4x4 HDMI® Matrix/Extender with 4 Receivers

P/N 21905

User's Manual

CONTENTS

SAFETY WARNINGS AND GUIDELINES.......................................................................................................................................3

INTRODUCTION................................................................................................................................................................................................4

FEATURES..............................................................................................................................................................................................................4

CUSTOMER SERVICE....................................................................................................................................................................................5

PACKAGE CONTENTS.................................................................................................................................................................................5

PRODUCT OVERVIEW.................................................................................................................................................................................6

Matrix Front Panel ..................................................................................................................................................................................6

Matrix Rear Panel.....................................................................................................................................................................................6

Receivers ......................................................................................................................................................................................................... 7

Remote Control.........................................................................................................................................................................................8

EDID MANAGEMENT...................................................................................................................................................................................8

INSTALLATION................................................................................................................................................................................................10

SPECIFICATIONS............................................................................................................................................................................................13

REGULATORY COMPLIANCE..............................................................................................................................................................13

Notice for FCC ..........................................................................................................................................................................................13

Notice for Industry Canada...........................................................................................................................................................14

SAFETY WARNINGS AND GUIDELINES

Please read this entire manual before using this device, paying extra attention to these

safety warnings and guidelines. Please keep this manual in a safe place for future reference.

This device is intended for indoor use only.

Do not expose this device to water or moisture of any kind. Do not place drinks or

other containers with moisture on or near the device. If moisture does get in or on

the device, immediately unplug it from the power outlet and allow it to fully dry

before reapplying power.

Do not touch the device, the power cord, or any other connected cables with wet

hands.

Do not expose this device to excessively high temperatures. Do not place it in, on,

or near heat sources, such as a fireplace, stove, radiator, etc. Do not leave it in direct

sunlight.

Ensure that power is turned off and disconnected before making any electrical

connections.

Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or

detergents. For stubborn deposits, moisten the cloth with warm water.

This device has no user serviceable parts. Do not attempt to open, service, or

modify this device.

INTRODUCTION

Thank you for purchasing this Blackbird™4x4 HDMI® Matrix/Extender! This matrix/extender

allows you to connect up to four HDMI video source devices and distribute them to four

local HDMI displays and four remote displays at the same time. It can extend 1080p@60Hz

video signals to distances up to 164 feet (50 meters) over a single Cat6 Ethernet cable. It

supports the Power over Cable (PoC) feature, allowing the remote receivers to receive

their power over the Ethernet cable. It can be controlled using the front panel buttons, the

included IR remote control, an internet browser using the TCP/IP control option, or a

computer using the RS232 control option. It supports IR extension so you can control the

source devices from the remote locations.

FEATURES

Distributes any of four HDMI® source devices to any of four pairs of outputs

Simultaneously supports local displays and displays connected to remote receivers

Supports video resolutions up to 1080p@60Hz

Can extend 1080p video signals to distances up to 164 feet (50 meters) over a single

Cat6 Ethernet cable

Supports wide band IR extension for control of source devices from the remote

locations or the remote displays from the source location

Delivers up to 4.95 Mbps bandwidth

Includes smart EDID management

Fully compliant with the HDMI 1.3, HDCP 1.1, and DVI 1.0 standards

Can be controlled using the front panel controls, the included IR remote control, an

internet browser using the TCP/IP control option, or a computer using the RS232

control option

CUSTOMER SERVICE

The Monoprice Customer Service department is dedicated to ensuring that your ordering,

purchasing, and delivery experience is second to none. If you have any problem with your

order, please give us an opportunity to make it right. You can contact a Monoprice

Customer Service representative through the Live Chat link on our website

www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-Sun: 9am-

6pm PT) or via email at [email protected]

PACKAGE CONTENTS

Please take an inventory of the package contents to ensure you have all the items listed

below. If anything is missing or damaged, please contact Monoprice Customer Service for a

replacement.

1x Blackbird™4x4 HDMI® matrix/extender

4x Receivers

1x AC power adapter (12 VDC, 2.5A)

4x Wideband IR transmitters

5x Wideband IR receivers

2x Mounting brackets

1x RS232 cable

1x IR remote control

1x User's manual

PRODUCT OVERVIEW

Matrix Front Panel

1. DISPLAY LEDs: A series of four numeric LEDs that indicate which sources are

assigned to each output, plus the IR "eye" for the included IR remote control.

2. CONTROL BUTTONS: Three buttons to control matrix switching. Repeatedly press

the OUT button until the desired output LED is illuminated. Next, repeatedly press

the IN button until the desired input is displayed. Finally, press the ENTER button to

assign the displayed input to the selected output.

Matrix Rear Panel

1. OUTPUTS: Four pairs of HDMI® and RJ45 video outputs. Connect a local display to

the HDMI port using an HDMI Cable or connect a remote receiver using a Cat6

Ethernet cable, or both.

2. INPUT: Four HDMI inputs for connecting video source devices and four 3.5mm IR

outputs for connecting an IR transmitter for remote control of each video source

device.

3. PC CONTROL: An RJ45 Ethernet jack for connecting to an existing Ethernet network

or for direct connection to a PC using an Ethernet cable, plus a DB9 connector for

connecting to a PC's COM port for RS232 control.

4. IR EXT: 3.5mm jack for connecting one of the included IR receivers in case the front

panel IR "eye" is obstructed.

5. EDID: Four DIP switches for setting the EDID behavior.

6. POWER: DC barrel connector for connecting the included AC power adapter.

7. POWER SWITCH: Toggle switch for turning the matrix on or off.

Receivers

1. IR IN: 3.5mm jack for connecting one off the included IR receivers for controlling the

source devices from the remote location.

2. POWER LED: The LED illuminates when the receiver is receiving power over the

Ethernet cable.

3. CAT: RJ45 jack for connecting the Cat6 Ethernet cable from the matrix/extender.

4. LINK LED: The LED illuminates when the receiver is receiving a stable HDMI® signal

over the connected Ethernet cable.

5. HDMI OUT: HDMI port for connecting a video display.

Remote Control

1. STANDBY BUTTON: Press the button to put the

matrix/extender into standby mode or to turn it on.

2. SELECTION BUTTONS: Four sets of six buttons for

selecting which inputs are assigned to each of the

four outputs. For direct selection, press the number

corresponding to the desired input in the desired

output section. You can also use the two arrow

buttons to cycle to the next or previous input.

EDID MANAGEMENT

Prior to installing the matrix/extender, you need to set the EDID DIP switches to control

the EDID information that will be sent to your source devices. EDID is an acronym for

Extended Display Identification Data, which is the method by which the display reports its

maximum resolution and audio capabilities to the source device, so that it can output the

proper resolution and audio type. If the source device outputs a resolution too high for the

display, the display will be blank. Similarly, if it tries to output too many audio channels,

you will only hear part of the audio signal.

Normally, the source device is connected directly to the display and this operation takes

place automatically without you even noticing it. However, since this matrix allows

connection of up to eight displays, each of which may have different capabilities, the

sources have no way of knowing which resolution and audio settings to use. The EDID DIP

switches solve this dilemma by providing each source with a fixed capability, so it always

know which resolution and audio types to output.

Perform the following steps to set the EDID switches on the matrix/extender, prior to

installing the system.

1. Check the user's manuals for each display you will be connecting to the matrix to

determine its maximum video resolution and audio capabilities. Write them down

so you can remember what they are.

2. Once you have determined the capabilities of each display, examine the list and

determine the lowest video resolution and the lowest quality audio type.

For example, say you have the following three displays:

4K television with 5.1-channel audio

1080p television with 2-channel audio

720p/1080i television with 7.1 channel audio

Based on this information, you would need to set the EDID for 720p/1080i video and

2-channel audio.

3. Locate the row on the following table that matches the minimum capabilities of

your displays and set the DIP switches accordingly. Note that the DIP switch down

position is 0 and the up position is 1.

Video Resolution

Audio Type

DIP Switches

720p/1080i

2-channel

0 0 0 0

720p/1080i

5.1-channel Dolby/DTS

0 0 0 1

720p/1080i

0 0 1 0

2D 1080p

2-channel

0 0 1 1

2D 1080p

5.1-channel Dolby/DTS

0 1 0 0

2D 1080p

0 1 0 1

3D 1080p

2-channel

0 1 1 0

3D 1080p

5.1-channel Dolby/DTS

0 1 1 1

3D 1080p

1 0 0 0

DVI 1024x768

2-channel

1 0 0 1

DVI 1920x1080

5.1-channel Dolby/DTS

1 0 1 0

DVI 1920x1200

1 0 1 1

Copy from HDMI OUTPUT A

1 1 0 0

Copy from HDMI OUTPUT B

1 1 0 1

Copy from HDMI OUTPUT C

1 1 1 0

Copy from HDMI OUTPUT D

1 1 1 1

INSTALLATION

Perform the following steps to install the matrix/extender system.

1. If you have not already done so, set the EDID DIP switches on the rear panel to

match the minimum capabilities of the displays you will be connecting.

2. Ensure that all equipment to be connected is powered off and unplugged from its

power source.

Indice

Altri manuali Monoprice Estensione

Monoprice

Monoprice Blackbird 43959 Manuale operativo

Monoprice

Monoprice DVI-LH Manuale utente

Monoprice

Monoprice Blackbird 30915 Manuale utente

Monoprice

Monoprice BLACKBIRD 44570 Manuale utente

Monoprice

Monoprice Blackbird 30446 Manuale utente

Monoprice

Monoprice BitPath AV 16227 Manuale utente

Monoprice

Monoprice 10224 Manuale utente

Monoprice

Monoprice 10224 Manuale utente

Monoprice

Monoprice 21792 Manuale utente

Monoprice

Monoprice 34898 Manuale utente

Monoprice

Monoprice SE535LTD Manuale utente

Monoprice

Monoprice 41097 Manuale utente

Monoprice

Monoprice Blackbird 8159 Manuale utente

Monoprice

Monoprice Blackbird Manuale utente

Monoprice

Monoprice 24281 Manuale utente

Monoprice

Monoprice MIR-300 Manuale utente

Monoprice

Monoprice 31055 Manuale utente

Monoprice

Monoprice RS232-L Manuale utente

Monoprice

Monoprice KVM-LII Manuale utente

Monoprice

Monoprice 10247 Manuale utente

Monoprice

Monoprice MIR-500 Manuale utente

Monoprice

Monoprice 24281 Manuale utente

Monoprice

Monoprice 18784 Manuale utente

Monoprice

Monoprice Blackbird 21608 Manuale utente

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente