morse 82A-125 Manuale utente
MORSE MFG. CO., INC. • 727 West Manlius Street • P.O. Box 518 • East Syracuse, NY 13057-0518
Phone: 315-437-8475 • Fax: 315-437-1029 • Email: service@MorseDrum.com • Webpage: MorseDrum.com
Copyright 2010 - Morse Mfg. Co., Inc. Form PL82A-125 (0509-1110) (Updated December 2, 2010 8:30 AM) 1
The Specialist In Drum Handling Equipment
MODEL 82A-125
Mobile-Karrier / Palletizer
with DC Power Lift
Contents
Page
Receiving Procedures. . . . . . . . . . . . . . . . . . . . 1
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Safety Information. . . . . . . . . . . . . . . . . . . . . 1 - 2
Machine Description. . . . . . . . . . . . . . . . . . . 3
Operating Instructions. . . . . . . . . . . . . . . . . . . . 4
Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . 4
Parts Lists and Diagrams. . . . . . . . . . . . . . . . . . 5 - 6
Operator’s Manual
for Morse Mobile-Karrier / Palletizer
Model 82A-125
Serial Number 0509 to 1110 (MMYY)
Receiving Procedures
Every Morse drum handler is inspected prior to shipping. However,
damage may be incurred during transit.
Check for visible damage. If you choose to accept damaged•
freight, always sign noting the damage on the Bill of
Lading.
Document the damage and have the truck driver sign. We•
recommend keeping a digital camera at your receiving dock
for this purpose.
Open packages expeditiously to check the condition of the•
goods. There is only a 24 hour window to notify the carrier
of any concealed damage.
Immediately• report all damage to the shipping company!
Then you may contact Morse for assistance with your
freight claim.
Morse Manufacturing will not be held responsible for any•
damaged freight that is not signed for as damaged.
Limited 2 Year Warranty
Morse drum handling equipment is guaranteed against defects in
workmanship or materials for two years when used properly within
its rated capacity. Warranty does not cover wear from normal use or
damage from accident or abuse. Motors and other purchased parts
carry the warranties of their manufacturers.
For warranty claims, contact your Morse Dealer to obtain a
return authorization number, and for return freight advice. Return
freight must be prepaid.
In all instances, liability is limited to the purchase price paid or to
repairing or replacing the product. Customer assumes liability for
anymodications,unauthorizedrepairsorpartssubstitution.
Safety Information
While Morse Manufacturing Co. drum handling equipment is
engineeredforsafetyandefciency,ahighdegreeofresponsibility
must be placed upon the machine operator to follow safe practices,
based primarily on common sense, upon which true safety
depends.
Failure to follow the safety precautions in this manual can result in
personal injury or property damage. Observe the same precautions
as with similar machinery where carelessness in operating or
maintenance is hazardous to personnel. Carefully read the safety
precautions below and throughout this manual.
Review the Material Safety Data Sheet(s) for the material(s) in
the drum(s) and take all necessary precautions. Safety shoes,
work gloves, hard hat and other personal protective devices are
recommended.
Prior to initial use, inspect all moving parts. Inspect saddle assembly
for proper operation. Perform necessary load test, inspections,
operator training, etc.
The Specialist In Drum Handling Equipment
MODEL 82A-125
Mobile-Karrier / Palletizer
with DC Power Lift
Operator’s Manual for Model 82A-125 Morse Mobile-Karrier / Palletizer
Serial Number 0509 to 1110 (MMYY)
MorseDrum.com
Copyright 2010 - Morse Mfg. Co., Inc. Form PL82A-125 (0509-1110) (Updated December 2, 2010 8:30 AM) 2
Safety Information (continued)
DANGER - Indicates a situation which, if not avoided, will result in serious injury or death.
This signal word is limited to the most extreme situations.
WARNING - Indicates a situation which, if not avoided, could result in serious injury or
death.
CAUTION - Indicates a situation which, if not avoided, can result in damage to the machine.
CAUTION – Do Not Transport with Drum Raised. Always lower the drum holder to lowest position
before transporting.
WARNING - The Mobile-Karrier / Palletizer is designed to handle one drum of the types listed at the
top of page 3. Machine Description. DO NOT attempt to handle any other type of drum or object. DO
NOT exceed the weight capacity of 800 Lb.
WARNING - Level Floors Only
Foroperationonlyonclean,leveloorsofsuitablebearingcapacity.Donotuseonslopedsurfaces,
ramps,irregularordebrisstrewnoors.
WARNING -DoNotModifytheUnit.Undernocircumstancesshouldanymodicationsbemadeto
theMorsemachinerywithoutfactoryauthorization. Anymodicationsmayvoid the warranty.This
machine was designed to perform a specic job and alterations may result in injury to operator or
machine.
WARNING -NoLooseFittingClothing.Wearclose-ttingclothingandsafetyequipmentappropriate
tothejob.Loosettingclothingmaybecomecaughtonthemachineryandcauseseverepersonal
injury.
WARNING - Hydraulic Fluid Under Pressure Can Be Hazardous
Escaping hydraulic uid under pressure can penetrate the skin, causing serious injury. Avoid the
hazard by relieving pressure before disconnecting hydraulic lines. Keep hands and body away from
pinholesandnozzles,whichejectuidunderhighpressure.Useapieceofcardboardtosearchfor
leaks. If an accident occurs, see a doctor immediately and inform them of the nature of the accident.
CAUTION - Wear safety shoes with non-slip soles and hard toe protection.
CAUTION -DONOTallowdrumtoimpactonoor,ground,ordumpingstation,etc.
The Specialist In Drum Handling Equipment
MODEL 82A-125
Mobile-Karrier / Palletizer
with DC Power Lift
Operator’s Manual for Model 82A-125 Morse Mobile-Karrier / Palletizer
Serial Number 0509 to 1110 (MMYY)
MorseDrum.com
Copyright 2010 - Morse Mfg. Co., Inc. Form PL82A-125 (0509-1110) (Updated December 2, 2010 8:30 AM) 3
Machine Description
The Mobile-Karrier / Palletizer is designed to lift, transport, and dispense a
ribbed 55-gallon steel drum 22.5” in diameter. The maximum capacity is 800
Lb.
Options
A smaller diameter drum can be handled with the correct size 55/30•
Series Diameter Adaptor installed (see Diameter Adaptor literature).
The• Bracket Assembly (Part # 4556-P) is required to handle a
plasticdrumwithoutatoprim(seegure2.1).Itisalsorecommended
to more securely handle a ber drum. You can use the Bracket
Assembly with a 55-gallon plastic, steel or ber drum. The brace
at top and bottom of the drum prevent it from slipping lengthways
through the drum holder. It adjusts for a drum 31” to 37” tall.
The• Top Rim Clamp (Part # 4560-P) grips the upper rim of your drum
topreventitfromslippingthroughthedrumholder(seegure2.2).To
handle a 55-gallon plastic drum with top rim, you must install either
theBracketAssemblyortheTopRimClamp.YoucanusetheTopRim
Clampwitha55-gallonplastic,steelorberdrumwithsuitabletoprim
Controls
The Morse Mobile-Karrier / Palletizer is manually propelled and steered. The
drum lift function is powered by a 12V DC motor.
There are two functions for the operator to control:
“LIFT” and lower function for vertical positioning of the drum1.
“TILT” function to control the degree of rotation of the drum2.
LIFT and Lower Function (Figure 2.3)
To raise the drum
Push and hold the valve handle in against the start switch.•
Release the handle when the drum is at the desired height.•
To lower the drum: Pull and hold the valve handle out away from the start•
switch.
TILT Function to tilt the drum
Either one of the two spring loaded plunger tilt-locks may be locked to1.
hold the drum upright. It is not necessary to lock both of them.
Position drum at pouring station.2.
Beforeunlockingthetilt-lock(s)topermittiltingthedrum,it3.
is recommended that you steady the drum and be prepared for its
possible tendency to tilt toward its heavier side.
With both tilt-locks unlocked, manually tilt the drum for pouring. The4.
drum pouring angle may be varied or it can be locked in horizontal
position by one of the tilt-locks.
WARNING: Keep hands and ngers clear of tilt lock hole, as a pinch point
will occur when drum rotates.
Figure 2.2
Plastic drum being lifted
with part number 4560-P
Top Rim Clamp Assembly
installed.
Figure 2.1
Plastic drum being lifted
with part number 4556-P
BracketAssembly
installed.
Figure 2.3
The Specialist In Drum Handling Equipment
MODEL 82A-125
Mobile-Karrier / Palletizer
with DC Power Lift
Operator’s Manual for Model 82A-125 Morse Mobile-Karrier / Palletizer
Serial Number 0509 to 1110 (MMYY)
MorseDrum.com
Copyright 2010 - Morse Mfg. Co., Inc. Form PL82A-125 (0509-1110) (Updated December 2, 2010 8:30 AM) 4
Operating Instructions
Roll drum lifter to drum. Steer unit so drum holder meets middle of drum. Operate1.
hydraulics as necessary. Roll the unit forward and push drum holder so it slips
around the drum.
WARNING: Keep hands and other objects away from top opening of lifting
frame.
To secure drum: drape cinch chain across face of drum and engage a link into2.
notch in hub of ratchet. Pull up on ratchet handle to tighten chain. If ratchet turns to
extent that pawl is beyond last ratchet tooth and chain is not tight, back up and try
putting next link in notch. Chain should tighten as ratchet turns and be held tight by
teeth of ratchet & pawl. Firm hand pressure on ratchet handle should tension chain
sufcientlytosecuredrum.DONOTusemechanicalaidssuchasapipetoextend
ratchet handle for extra leverage.
Operateliftfunctiontoraisedrumofftheoor,pushdrumliftertodeliverdrum.3.
Avoid unreasonably rough or non-level surfaces. Move at moderate speed. Carry
drumonlyhighenoughtoavoidcontactwiththeoororobstacles.Pushloaded
unit when possible for transporting. Pulling unit should be limited to maneuvering at
short distance.
Either one of the two spring loaded plunger tilt locks may be locked to hold drum4.
upright. Unlocking both will permit drum to be tilted. Drum pouring angle may be
varied or drum can be locked in horizontal position by inserting one tilt lock. It is not
necessarytolockbothtiltlocks.Beforeunlockingtiltlockitisrecommendedthat
you steady drum and prepare to resist its tendency to tilt toward its heavy end.
WARNING: Keep hands and ngers clear of tilt lock hole, as a pinch point will
occur when drum rotates.
Beforeunloadingdrum,releasetiltlocksandreturndrumtoupright.Lowerdrumat5.
a controlled rate.
To remove drum: pull ratchet handle clockwise to relieve pressure on ratchet teeth.6.
Lift pawl handle to release teeth engagement and rotate ratchet counterclockwise
to loosen chain and allow its removal from notch. Pull unit away and park on level
oor,outoftrafclaneswhennotinuse.
Adjustment for Shorter Drums: The drum holder assembly is factory set in upper7.
position for handling typical 55 gallon drums. For handling shorter drums such
as typical 30 gallon drums, relocate drum holder assembly downward as follows:
Detach by removing nuts that hold it to lifting assembly. Reattach at alternate
location 6” lower.
Maintenance
Periodicinspectionforthegeneralconditionofstructuralandmechanicalcomponentsisimperativeforsafeandefcientoperation.•
Periodically inspect all moving parts, framework, and contact areas for signs of wear, fatigue, or loosening. Tighten, adjust, or•
replace parts as necessary to prevent failure and maintain proper function.
Inspectthehydraulicsystemforoildrips,hosedamage,orothersignsofwear.Inspectthelevelandconditionofthehydraulicuid.•
Replace any parts that show signs of wear.
Grease wheel bearings periodically. Oil or grease all moving parts including: Tilt locks, fulcrum shafts, the hinge pin, and the ratchet•
and pawl.
Worn or damaged parts must be properly replaced with the correct, genuine Morse parts.•
HydraulicpumpisshippedlledwithNocoPremiumplusautomatictransmissionuidd/m.Materialsafetydatasheet(msds)is•
available online. Change oil yearly, sooner depending on dirty conditions or outdoor use. Replace oil with Mobil dte 24 or equivalent
for indoor use (Mobil dte 13 for outdoor use).
The Specialist In Drum Handling Equipment
MODEL 82A-125
Mobile-Karrier / Palletizer
with DC Power Lift
Operator’s Manual for Model 82A-125 Morse Mobile-Karrier / Palletizer
Serial Number 0509 to 1110 (MMYY)
MorseDrum.com
Copyright 2010 - Morse Mfg. Co., Inc. Form PL82A-125 (0509-1110) (Updated December 2, 2010 8:30 AM) 5
ITEM QTY. PART # DESCRIPTION
1* 2 8160-P WHEEL,6”,3/4”BRG,81,82
2* 2 705-P CAP,HUB,PUSH-ON,3/4”
3 2 83-P GRIP, HANDLE, 1-1/4 X 4-1/2
4* 2 3308-P CASTER,4”SWIVEL,DBLRACE
5 8 35-P HHCS, 5/16-18 X 1 GR2
6 8 1570-P WASHER, 5/16 USS 7/8 OD
7 8 1650-P WASHER, 5/16 SPLIT LOCK
8* 4 3194-P BEARING,3/4ID,82,500,600
9 4 166-P SNAP RING, EXTERNAL, 82
10 1 3343-P RISER WELD, 82 SERIES
11 1 3371Z-P OVERHEAD ASM, 82A
12 2 64-P ROLL PIN, 3/16 X 1-1/4
13 4 17-P WASHER, 5/8 SAE FL 1-5/16 OD
14 2 91-P NUT, 1/2-13 FIN HEX
15 2 1644-P WASHER, 1/2 SPLIT LOCK
16 1 3611-P CYLINDER, 1 X 24, SAE 82
17 1 8260-P PIN, CLEVIS, CYL, 5/8, 82
ITEM QTY. PART # DESCRIPTION
18 1 3612-P HYD FIT, SAE ADAPTER
19 2 82-P HHCS, 3/8-16 X 2-1/4 GR2
20 2 1474-P WASHER, 3/8 SPLIT LOCK
21 1 3694-P HYD HOSE ASM, 35” 82 PL
22 1 765-P HYDFIT,MALEELBOW,FLARE400
23 1 3177-P VALVE, P.C. FLOW CONT .75 GPM
24 1 1108-P HYD FIT, PIPE NIPPLE, 1/4
25 1 M301-P HYD POWER PACK, -125
26 1 1729-P BOTTOM,BATTERYBOX,400
27 4 4168-P WASHER, 7/32, 1-1/2 OD, FENDER
28 4 193-P SCREW, 12-14 X 3/4 3 PT TEK
29 1 388-P BATTERY,12VDC
30 1 403-P HARNESS,BATTERYCABLE,20/30
31 1 1728-P TOP,BATTERYBOX,400,285A-BP
32 1 404-P HARNESS,PUMPCABLE,20/20
33 1 389-P CHARGER 12V 50HZ 60HZ 100-240V
* Recommended spare parts.
The Specialist In Drum Handling Equipment
MODEL 82A-125
Mobile-Karrier / Palletizer
with DC Power Lift
Operator’s Manual for Model 82A-125 Morse Mobile-Karrier / Palletizer
Serial Number 0509 to 1110 (MMYY)
MorseDrum.com
Copyright 2010 - Morse Mfg. Co., Inc. Form PL82A-125 (0509-1110) (Updated December 2, 2010 8:30 AM) 6
ITEM QTY. PART # DESCRIPTION
1 2 59-P PLUNGER, 80, 85
2 2 60-P SPRING, PLUNGER, 80, 85
3 2 61-P ROLL PIN, 3/16 X 2-1/2
4 1 101Z-P SADDLE,808285SOCKETTUBE
5* 1 726-P A RATCHET HINGE PLATE CPT 1/4”
6 1 168-P PAWL, WITH DRILLED HOLE
7 1 710-P RETAINER, RATCHET PUSH NUT 3/4
8 1 165-P RATCHET,MALLEABLE,SADDLE
9 1 136-P GRIP, HANDLE 7/8” X 4-3/4”
10 1 170-P SCREW, 3/8 DIA X 5/8 SHOULDER
11 1 169-P SPRING, PAWL
ITEM QTY. PART # DESCRIPTION
12* 1 180-P CHAIN, CINCH, 3/16 ALLOY 33 LK
13* 1 1296-P HHCS, 1/4-20 X 7-1/2 GR5
14* 1 1297-P NUT, 1/4-20 REV HEX LOCK
15* 1 4079-P HHCS, M8 X 60 MM CL8.8, 8MM
16* 1 4081-P NUT, M8 ESNA, 8MM
17* 1 4414-P COVER, CINCH CHAIN, FLEX PVC
18 1 4710-P PIN,BOWTIECOTTER,MOR
19 2 62-P WASHER, 3/4 SPRING
20 2 64-P ROLL PIN, 3/16 X 1-1/4
21 1 165KIT-P KIT, RATCHET CHAIN TIGHTENER
* Recommended spare parts.
Overhead Assembly
Part # 3371Z-P
Altri manuali morse Magazzinaggio
morse
morse Hydra-Lift 400A-60 Manuale utente
morse
morse 400AM-96 Manuale utente
morse
morse KONTROL-KARRIERS 185 Series Manuale utente
morse
morse 400A-96-125 Manuale utente
morse
morse 0409 Manuale utente
morse
morse 400A-72SS-124 Manuale utente
morse
morse Hydra-Lift 400A-96 Manuale utente
morse
morse 185G Manuale utente
morse
morse 515-N-124 Manuale utente
morse
morse 400AM-72 Manuale utente
morse
morse 400AM-60-124 Manuale utente
morse
morse 82AM Manuale utente
morse
morse 85i/E Manuale utente
morse
morse 82A Manuale utente
morse
morse 400A-96SS Manuale utente
morse
morse 82A-125 Manuale utente
morse
morse 82A-SS Manuale utente
morse
morse Omni-Lift Karrier Manuale utente
morse
morse 1110 Manuale utente
morse
morse 400A-72-124 Manuale utente
