morse MORCINCH 4556-P Manuale utente
The Specialist In Drum Handling Equipment
Kit # 4556-P
Kit, Bracket Assembly, MORCINCHTM
Copyright 2019 - Morse Mfg. Co., Inc. Form PL4556 (0209-____) (Updated 17 Jun, 2019 4:06 PM) 1
Operator’s Manual for Morse MORCINCHTM Bracket Assembly Kit - Part # 4556-P
Serial Number 0209 to ____ (MMYY)
ITEM QTY. PART # DESCRIPTION
1 1 1371-P HOLD DOWN, BRACKET ASM
2 1 1372-P TEE HANDLE, BRACKET ASM, 1-1/2
3 3 1169-P NUT, 3/8-16 REV HEX LOCK
4 3 82-P HHCS, 3/8-16 X 2-1/4 GR2
5 1 5108-P WELD, BRACKET, 35”
6 1 4556-P KIT, BRACKET ASM, MORCINCH
7 2 1315-P HHCS, 3/8-16 X 2-3/4 GR2
INSTALLATION INSTRUCTIONS
for MORCINCHTM Drum Holder
Bolt bottom bracket (item 5) to drum holder, using 2 bolts1.
(item 4) and 2 nuts (item 3), bolt in place through the 2
lowest holes on bottom bracket.
Slide hold down (item 1) down over top of bottom bracket2.
and tighten in place with tee handle (item 2).
Fasten stop bolt (item 4) and nut (item 3) into top hole of3.
bottom bracket.
INSTALLATION INSTRUCTIONS
for Drum Holder with Socket Tube
Slide bottom bracket (item 5) up through socket tube and,1.
using 2 bolts (item 7) and 2 nuts (item 3), bolt in place
through the 2 lowest holes on bottom bracket.
Slide hold down (item 1) down over top of bottom bracket2.
and tighten in place with tee handle (item 2).
Fasten stop bolt (item 4) and nut (item 3) into top hole of3.
bottom bracket. Use bottom hole for 195 Series starting
with serial number 0207.
Syracuse, NY, 13208 U.S.A.
morsedrum.com (315) 437-8475
The Specialist In Drum Handling Equipment
Kit # 4556-P
Kit, Bracket Assembly, MORCINCHTM
Operator’s Manual for Morse MORCINCHTM Bracket Assembly Kit - Part # 4556-P
Serial Number 0209 to ____ (MMYY)
morsedrum.com
Copyright 2019 - Morse Mfg. Co., Inc. Form PL4556 (0209-____) (Updated 17 Jun, 2019 4:06 PM) 2
OPERATING INSTRUCTIONS
TO SECURE DRUM:
Position drum holder assembly so bottom bracket (item 5)1.
rests on oor.
Loosen tee handle (item 2) and slide hold down (item 1) up2.
to highest position. Tighten tee handle.
Load drum onto bottom bracket and into drum holder with a3.
hand truck.
Loosen tee handle and slide hold down to meet top of drum.4.
Tighten tee handle. (see Figure 1)
Secure drum with chain and ratchet mechanism. Drum is5.
now ready to be lifted and tilted.
TO RELEASE DRUM:
Lower drum to oor in upright position.1.
Release chain from ratchet mechanism by applying2.
pressure to ratchet handle in a clockwise direction with one
hand and opening pawl to free ratchet with other hand.
Remove chain link from ratchet.
Loosen tee handle and slide hold down up to highest3.
position. Tighten tee handle.
Remove drum with hand truck.4.
Figure 1
Plastic drum being lifted with
part number 4556-P Bracket
Assembly Kit installed.
WARNING: This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and
2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to
the State of California to cause birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
Questo manuale è adatto per i seguenti modelli
1
Altri manuali morse Magazzinaggio
morse
morse 400A-72 Manuale utente
morse
morse 285A Manuale utente
morse
morse 400A-96SS Manuale utente
morse
morse 82A-SS Manuale utente
morse
morse 82A-125 Manuale utente
morse
morse 400AM-96 Manuale utente
morse
morse 400A-60-115 Manuale utente
morse
morse Omni-Lift Karrier Manuale utente
morse
morse 400A-96-114 Manuale utente
morse
morse 4560M-P Manuale utente
morse
morse 310 Series Manuale utente
morse
morse 400AM-72 Manuale utente
morse
morse 80i Manuale utente
morse
morse 400A-96-115 Manuale utente
morse
morse 0719 Manuale utente
morse
morse 510-114 Manuale utente
morse
morse 185XGR Manuale utente
morse
morse 400AM-96-124 Manuale utente
morse
morse 400A-60-125 Manuale utente
morse
morse 400AM-60-114 Manuale utente
