Motorola HK200 Manuale utente
Quick Start Guide
MOTOROLA HK200
HK201
HK202
HK210
HK211
1Congratulations
Congratulations
Your Motorola HK200/HK201/HK202/HK210/HK211
headset is designed for quick connections, clear calls,
and lasting comfort.
We’ve crammed all of the main features of your
headset into this handy guide, and in a matter of
minutes we’ll show you just how easy your headset is
to use.
So go on, check it out.
more information
on the Web: www.motorola.com/support
Caution: Before using your headset for the first
time, please read the important Safety, Regulatory
& Legal information at the back of this guide
(page 12).
2Your headset
Yo u r h e a d s e t
the important buttons and connectors
Earhook
Power
Switch
Micro USB
Charging
Connector
Volume
Button
Call
Button
Ear
Speaker
Indicator
Light
Microphone
3Charge it
Charge it
let’s get you up and running
Note:
Headset is not functional while charging.
Note: Your battery is designed to last the life of your
product. It should only be removed by a recycling
facility. Any attempt to remove or replace your
battery will damage your headset.
Indicator Light
Red/Purple - charging
Blue - fully charged
4Basics
Basics
a few essentials to get you started
Turn it on & off
Use the power switch to
turn your headset on and
off as shown.
Wear it
Flex the ear hook and loop it over
your ear as shown.
Make sure the speaker aligns with
your ear canal, and the microphone
is pointing towards your mouth.
Your headset comes
ready for use on your
right ear. To change
the ear hook for use
on the left ear, just
pull off the earhook,
turn, and reinstall as shown.
off
on
5Pair & connect
Pair & connect
connect and go
Note: The voice prompts are only in English.
1Turn off any Bluetooth devices previously paired
with your headset.
2Turn on the Bluetooth feature on your phone.
3Put the headset on your ear (see “Wear it” on
page 4 for help).
4Turn on your headset (see “Turn it on & off” on
page 4 for help).
The indicator light becomes steadily lit in blue and you
hear “ready to pair”.
5Follow voice prompts to connect your phone to your
headset.
Note: When prompted for the passkey, enter 0000.
When connected, you hear “phone connected” and
see the indicator light rapidly flash in blue and purple.
Test your connection
1Place the headset on your ear.
2On the phone, dial the number you want to call and
press the Call/Send key.
If your phone and headset are successfully connected,
you hear ringing on the headset.
6Pair & connect
For daily use, make sure your headset is turned on,
and your phone’s Bluetooth feature is on. Your headset
and phone will connect automatically.
Restore to factory settings
Caution: This action erases all pairing information
stored in your headset.
1Turn your headset off.
2Press and hold the Volume button and Call button
together, and turn your phone on - wait until the
indicator light is steady blue.
7Calls
Calls
it’s good to talk
Note: Some call features are phone/network
dependent.
Note: The voice prompts are only in English.
To . . .
answer call Press the Call button.
reject call Press and hold the Volume button
until you hear a tone.
make a voice
dial call
Press the Call button and you hear
a tone.
redial last call Press and hold the Call button until
you hear a tone.
mute or
unmute a call
Press and hold the Volume button
until you hear “mute on” or “mute
off”.
end a call Press the Call button.
answer or
reject second
call
Follow the phone’s instructions.
adjust call
volume
Press and release Volume button
until desired volume is reached
8Status light
Status light
know your headset
Note:
After 20 minutes of inactivity, the light stops
flashing to conserve power, but the headset remains on.
if light shows... your headset is...
off off
three blue flashes powering on/off
steady blue in pairing/connect mode
rapid blue/purple
flashes
connecting to your phone
quick blue flash receiving or making a call
slow blue pulse connected (on a call)
slow blue flash in standby (not on a
call—connected to the phone)
slow red flash idle (not connected to a phone)
slow purple pulse muting the call
steady red trying to connect to your
phone
quick red flash in a low battery state
Altri manuali per HK200
1
Questo manuale è adatto per i seguenti modelli
4
Indice
Lingue:
Altri manuali Motorola Cuffia
Motorola
Motorola H690 Manuale utente
Motorola
Motorola HK201 Manuale utente
Motorola
Motorola HK255 Manuale utente
Motorola
Motorola H375 - Headset - Over-the-ear Manuale utente
Motorola
Motorola HK110 Manuale utente
Motorola
Motorola MOTOSTART H350 Manuale utente
Motorola
Motorola WHISPER Manuale utente
Motorola
Motorola MOTOSTART HS815 Manuale utente
Motorola
Motorola H390 - Headset - In-ear ear-bud Manuale utente
Motorola
Motorola Motostart H700 Manuale utente
Motorola
Motorola FINITI Manuale utente
Motorola
Motorola HK210 Manuale utente
Motorola
Motorola H520 Manuale utente
Motorola
Motorola H710 - Headset - Over-the-ear Manuale utente
Motorola
Motorola Audex Jacket Series Manuale utente
Motorola
Motorola H790 - Headset - Monaural Manuale utente
Motorola
Motorola WHISPER Manuale utente
Motorola
Motorola HS801 Manuale utente
Motorola
Motorola H715 - Headset - Over-the-ear Manuale utente
Motorola
Motorola H500 Manuale utente
