Mounting Solutions PLL-50/70 Manuale utente
Assembly Guide
PLL-50/70
www.mnmounting.com
2 Merezhna str., Bila Tserkva,
Kyiv region, 09100, Ukraine
Assembly Guide for Projector leg lock PLL-50/70
SAFETY INSTRUCTIONS
1. Entrust mounting equipment only to experienced
professionals and strictly follow the providedv safety
instructions. Improperly installed equipment may result
in property damage, personal injury and/or liability for
the installing contractor.
2. Only use appropriate fastening hardware.
3. Always make sure to securely use and lock all
mounting bolts. Loose bolts may become unscrewed
over time due to vibration which will then create a safety
hazard.
Assembly components:
1
PLL-50/70 - 4 pcs
Screw M10 - 4 pcs
3
4
Washer - 4 pcs
Nut - 4 pcs
Mounting kit included in
the PAP package:
An example of installing PLL-50/70 and projector on a pedestal
2
Steel Cup, (SG-50 or SG-70) - 4 pcs
5
Assembly Guide
PLL-50/70
www.mnmounting.com
2 Merezhna str., Bila Tserkva,
Kyiv region, 09100, Ukraine
1. Disassemble all PLLs required for
installation (3 or 4 pcs.)
2. Install the lower parts of the
disassembled PLLs and cups from
the PAP kit (SG-50 or SG-70) in the
corresponding holes of the upper plate
of the pedestal according to the legs
of your projector and screw them kit
included in the PAP package.
Assembly Instructions:
1
2
3
3. Install the projector so that its leg
t into the PAP cups.
4. Fix the legs with the upper parts
of the PLL and x the screws securely.
4
Altri manuali Mounting Solutions Accessori per proiettori
