Moxa Technologies UC-3100 Series Manuale utente

P/N: 1802031000021

*1802031000021*

UC-3100

Quick Installation Guide

Edition 2.0, July 2018

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

Moxa’s UC-3100 Series computers can be used as smart edge gateways

for data pre-processing and transmission, as well as for other embedded

data-acquisition applications. The UC-3100 Series includes three models,

UC-3101, UC-3111 and UC-3121, each supporting different wireless

options and protocols. Please refer to the datasheet for more information.

Package Checklist

Before installing the UC-3100, verify that the package contains the

following items:

•1 x UC-3100 RISC computer

•1 x DIN-rail mounting kit (pre-installed)

•1 x Power jack

•1 x 3-pin terminal block for power

•1 x CBL-4PINDB9F-100: 4-pin pin header to DB9 female console port

cable, 100 cm

•1 x Quick installation guide (printed)

•1 x Warranty card

IMPORTANT: Notify your sales representative if any of the above items

are missing or damaged.

UC-3100 Panel Layout

The following figures show the panel layouts of the UC-3100 models:

UC-3101

- 3 -

UC-3111

UC-3121

- 4 -

LED Indicators

LED

Name

Status

Function

Notes

SYS

Green

Power is on

Refer to the

Function Button

(FN Button) and LED

Indicators section in the

hardware/software user

manual for more details.

Red

FN button is pressed

Off

Power is off

LAN1/

LAN2

Green

10/100 Mbps Ethernet

mode

Off

Ethernet port is not active

COM1/

COM2/

CAN1

Orange

Serial/CAN port is

transmitting or receiving

data

Off

Serial/CAN port is not

active

Wi-Fi

Green

Wi-Fi connection has

been established

Client mode: 3 levels with

signal strength

1 LED is on: Poor signal

quality

2 LEDs are on: Good signal

quality

All 3 LEDs are on: E

xcellent

signal quality

AP mode:

All 3 LEDs

blinking at the same time

Off

Wi-Fi interface is not

active

LTE

Green

Cellular connection has

been established

3 levels with signal strength

1 LED is on: Poor signal

quality

2 LEDs are on: Good signal

quality

All 3 LEDs are on: E

xcellent

signal quality

Off

Cellular interface is not

active

Installing the UC-3100

UC-3100 computer can be mounted on to a DIN rail or on to a wall. The

DIN-rail mounting kit is attached by default. To order a wall-mounting kit,

contact a Moxa sales representative.

DIN-Rail Mounting

To mount the UC-3100 on to a DIN rail, do the following:

1. Pull down the slider of the DIN-rail bracket located at the back of the

unit

2. Insert the top of the DIN rail into the slot just below the upper hook

of the DIN-rail bracket.

3. Latch the unit firmly on to the DIN rail as shown in the illustrations

below.

4. Once the computer is mounted properly, you will hear a click and the

slider will rebound back into place automatically.

- 5 -

Wall Mounting (Optional)

The UC-3100 can also be wall mounted. The wall-mounting kit needs to

be purchased separately. Refer to datasheet for more information.

1. Fasten the wall-mounting kit to the UC-3100 as shown below:

2. Use two screws to mount the UC-3100 on to a wall.

Connector Description

Power Connector

Connect the power jack (in the package) to the UC-3100’s DC terminal

block (located on the bottom panel), and then connect the power adapter.

It takes several seconds for the system to boot up. Once the system is

ready, the SYS LED will light up.

Grounding the UC-3100

Grounding and wire routing help limit the effects of noise due to

electromagnetic interference (EMI). There are two ways to connect the

UC-3100 grounding wire to the ground.

1.Through the SG (Shielded Ground,

sometimes called Protected Ground):

The SG co

ntact is the left-most contact in the 3-

power terminal block connector when viewed from

the angle shown here. When you connect to the SG

contact, the noise will be routed through the PCB and

the PCB copper pillar to the metal chassis.

2. Through the GS (Grounding Screw):

The GS is located between the console port and the

power connector.

When you connect to the GS wire

the noise is routed directly from the metal chassis.

- 6 -

Ethernet Port

The 10/100 Mbps Ethernet port uses the RJ45 connector. The pin

assignment of the port is shown below:

Signal

Tx+

Tx-

Rx+

–

Rx-

–

Serial Port

The serial port uses the DB9 male connector. It can be configured by

software for the RS-232, RS-422, or RS-485 mode. The pin assignment of

the port is shown below:

RS-232

RS-422

RS-485

DCD

TxD-(A)

–

RxD

TxD+(A)

–

TxD

RxD+(B)

Data+(B)

DTR

RxD-(A)

Data-(A)

GND

DSR

–

TRS

–

CTS

–

CAN Port (UC-3121 Only)

The UC-3121 comes with a CAN port which uses the DB9 male connector

and is compatible with the CAN 2.0A/B standard. The pin assignment of

the port is shown below:

Signal Name

–

CAN_L

CAN_GND

–

CAN_SHLD

GND

CAN_H

–

CAN_V+

- 7 -

SIM Card Socket

The UC-3100 comes with two nano-SIM card sockets for cellular

communication. The nano-SIM card sockets are located on the same side

as the antenna panel. To install the cards, remove the screw and the

protection cover to access the sockets, and then insert the nano-SIM

cards into the sockets directly. You will hear a click when the cards are in

place. The left socket is for SIM 1 and the right socket is for SIM 2. To

remove the cards, push the cards in before releasing them.

SMA Connector

The UC-3100 comes with a built-in wireless module. You must connect

the antenna to the SMA connector before you can use the wireless

function (refer to datasheet for more information). The C1 & C2

connectors are interfaces to the cellular module, W1 & W2 (UC-3111 &

UC-3121 only) are interfaces to the Wi-Fi module.

SD Card Socket (UC-3111 Only)

The UC-3111 comes with a SD-card socket for storage expansion. The SD

card socket is located next to the Ethernet port. To install the SD card,

remove the screw and the protection cover to access the socket, and then

insert the SD card into the socket. You will hear a click when the card is in

place. To remove the card, push the card in before releasing it.

Console Port

The console port is an RS-232 port that you can connect to with a 4-pin

pin header cable (in the package). You can use this port for debugging or

firmware upgrade.

Signal

GND

RxD

TxD

USB

The USB port is a type-A USB 2.0 version port, which can be connected

with a USB storage device or other type-A USB compatible devices.

- 8 -

Real-Time Clock

The real-time clock in the UC-3100 is powered by a lithium battery. We

strongly recommend that you do not replace the lithium battery without

the help of a Moxa support engineer. If you need to change the battery,

contact the Moxa RMA service team.

ATTENTION

There is

a risk of explosion if the battery is replaced with an

incorrect type of battery.

Accessing the UC-3100 Using a PC

You can use a PC to access the UC-3100 by one of the following methods:

A. Through the serial console port with the following settings:

Baudrate = 115200 bps, Parity = None, Data bits = 8,

Stop bits = 1, Flow Control = None

ATTENTION

Remember to choose the

“VT100” terminal type. Use the console

cable to connect a PC to the UC-3100's serial console port

B. Using SSH over the network. Refer to the following IP addresses and

Default IP Address

Netmask

LAN 1

192.168.3.127

255.255.255.0

LAN 2

192.168.4.127

255.255.255.0

Password: moxa

Altri manuali per UC-3100 Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Moxa Technologies PC industriale

Moxa Technologies

Moxa Technologies CN2510 Series Manuale utente

Moxa Technologies

Moxa Technologies UC-8100A-ME-T Manuale utente

Moxa Technologies

Moxa Technologies DA-681A Series Istruzioni per l’uso

Moxa Technologies

Moxa Technologies DA-685 Series Manuale utente

Moxa Technologies

Moxa Technologies DRP-C100 Series Istruzioni per l’uso

Moxa Technologies

Moxa Technologies IA260 series Manuale utente

Moxa Technologies

Moxa Technologies UC-8200 Series Istruzioni per l’uso

Moxa Technologies

Moxa Technologies DA-662A-8 Istruzioni per l’uso

Moxa Technologies

Moxa Technologies ThinkCore DA-660-8-CE Manuale utente

Moxa Technologies

Moxa Technologies V481-XPE Manuale utente

Moxa Technologies

Moxa Technologies DA-710 Series Manuale utente

Moxa Technologies

Moxa Technologies IA240 Istruzioni per l’uso

Moxa Technologies

Moxa Technologies ioLogik 2500 Series Manuale utente

Moxa Technologies

Moxa Technologies UC-5100 Series Manuale utente

Moxa Technologies

Moxa Technologies TC-6110-W7E Manuale utente

Moxa Technologies

Moxa Technologies UC-7122 Istruzioni per l’uso

Moxa Technologies

Moxa Technologies IA260 series Manuale utente

Moxa Technologies

Moxa Technologies V2201 Manuale utente

Moxa Technologies

Moxa Technologies DA-682C Series Manuale utente

Moxa Technologies

Moxa Technologies V481-XPE Manuale utente

Moxa Technologies

Moxa Technologies DA-681-I-SP-CE Manuale utente

Moxa Technologies

Moxa Technologies V2406 Manuale utente

Moxa Technologies

Moxa Technologies W406 WinCE Manuale utente

Moxa Technologies

Moxa Technologies AIG-300 Series Manuale utente

Manuali PC industriale popolari di altre marche

Chipsee

Chipsee PPC-A72-101 Manuale utente

Advantech

Advantech UNO-2184G Manuale utente

MSI

MSI MS-9A76 Manuale utente

Stackrack

Stackrack THOR200 Manuale utente

Nodka

Nodka eBOX-3000-ETC Manuale utente

Siemens

Siemens SIMATIC IPC627E Manuale utente

MSI

MSI MS-9A89 Manuale utente

Artila

Artila Matrix-516 Manuale utente

Siemens

Siemens SIMATIC Rack PC 840 V2 Manuale utente

Advantech

Advantech IPPC-6152A Manuale utente

Beckhoff

Beckhoff CX9020 Manuale utente

Dell

Dell Embedded Box PC 5000 Manuale utente

IBASE Technology

IBASE Technology ASB200-918 Series Manuale utente

Lenovo

Lenovo ThinkCentre M90q Manuale del proprietario

IXXAT

IXXAT Econ 100 Manuale utente

Kontron

Kontron KBox A-151-TGL Manuale utente

AXIOMTEK

AXIOMTEK ICO500-518 Series Manuale utente

JLT

JLT 1214N Manuale utente