MSI MS-9A76 Manuale utente

MS-9A76

Industrial Data Machine

Preface MS-9A76

registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names men-

tioned may be trademarks of their respective owners. No warranty as to accuracy

or completeness is expressed or implied. MSI reserves the right to make changes

to this document without prior notice.

Revision History

Revision Date

V1.0 2018/08

Technical Support

If a problem arises with your product and no solution can be obtained from the

user’s manual, please contact your place of purchase or local distributor. Alterna-

tively, please visit https://www.msi.com/support/ for further guidance.

iii

Preface MS-9A76

Safety Instructions

￭Always read the safety instructions carefully.

￭Keep this User’s Manual for future reference.

￭Keep this equipment away from humidity.

￭Lay this equipment on a reliable at surface before setting it up.

￭The openings on the enclosure are for air convection hence protects the

equipment from overheating. DO NOT COVER THE OPENINGS.

￭Make sure the voltage of the power source and adjust properly 110/220V

before connecting the equipment to the power inlet.

￭Place the power cord such a way that people can not step on it. Do not place

anything over the power cord.

￭Always Unplug the Power Cord before inserting any add-on card or mod-

ule.

￭All cautions and warnings on the equipment should be noted.

￭Never pour any liquid into the opening that could damage or cause electrical

shock.

￭If any of the following situations arises, get the equipment checked by ser-

vice personnel:

◯The power cord or plug is damaged.

◯Liquid has penetrated into the equipment.

◯The equipment has been exposed to moisture.

◯The equipment does not work well or you can not get it work according

to User’s Manual.

◯The equipment has dropped and damaged.

◯The equipment has obvious sign of breakage.

￭DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT UNCONDI-

TIONED, STORAGE TEMPERATURE ABOVE 60oC (140oF), IT MAY DAM-

AGE THE EQUIPMENT.

￭When re-plug the DC-in cable, the interval time should be longer than 5

seconds.

警告使用者:

此為甲類資訊技術設備，於居住環境中使用時，可能會造成射頻擾動，在此種情

況下，使用者會被要求採取某些適當的對策。

Preface MS-9A76

Chemical Substances Information

In compliance with chemical substances regulations, such as the EU REACH

Regulation (Regulation EC No. 1907/2006 of the European Parliament and the

Council), MSI provides the information of chemical substances in products at:

https://www.msi.com/html/popup/csr/evmtprtt_pcm.html

Battery Information

European Union:

Batteries, battery packs, and accumulators should not be

disposed of as unsorted household waste. Please use the

public collection system to return, recycle, or treat them in

compliance with the local regulations.

廢電池請回收

Taiwan:

For better environmental protection, waste batteries should

be collected separately for recycling or special disposal.

California, USA:

The button cell battery may contain perchlorate material

and requires special handling when recycled or disposed

of in California.

For further information please visit:

https://www.dtsc.ca.gov/hazardouswaste/perchlorate/

Danger of explosion if battery is incorrectly replaced. Replace only with the

same or equivalent type recommended by the manufacturer.

Preface MS-9A76

CE Conformity

Hereby, Micro-Star International CO., LTD declares that this de-

vice is in compliance with the essential safety requirements and

other relevant provisions set out in the European Directive.

FCC-A Radio Frequency

Interference Statement

This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction manual, may

cause harmful interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference, in which case the user

will be required to correct the interference at his own expense.

Notice 1

The changes or modi󰘰cations not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and AC power cord, if any, must be used in order to

comply with the emission limits.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received, including interference that

may cause undesired operation.

WEEE Statement

Under the European Union (“EU”) Directive on Waste Electrical and

Electronic Equipment, Directive 2002/96/EC, which takes e󰘯ect on

August 13, 2005, products of “electrical and electronic equipment”

cannot be discarded as municipal waste anymore and manufacturers

of covered electronic equipment will be obligated to take back such

products at the end of their useful life.

Preface MS-9A76

CONTENTS

Revision History ............................................................................................ ii

Technical Support.......................................................................................... ii

Safety Instructions.........................................................................................iii

Chemical Substances Information ............................................................... iv

Battery Information....................................................................................... iv

CE Conformity............................................................................................... v

FCC-A Radio Frequency Interference Statement ......................................... v

WEEE Statement .......................................................................................... v

1 Overview.......................................................................................1-1

System Overview .......................................................................................1-2

System Specications................................................................................1-9

Block Diagram..........................................................................................1-12

Motherboard Jumpers..............................................................................1-13

Mechanical Overview (4-Slot SKU)..........................................................1-15

Mechanical Overview (2-Slot SKU)..........................................................1-21

2 Getting Started.............................................................................2-1

Top Cover...................................................................................................2-2

CPU............................................................................................................2-4

Memory ......................................................................................................2-8

Hard Disk Drive ........................................................................................2-10

CFast Card...............................................................................................2-14

PCIe Expansion Card...............................................................................2-15

Mini PCIe Card (Optional for 2-Slot SKU)................................................2-17

Fan Module (Optional for 4-Slot SKU) .....................................................2-18

Fan Module (Optional for 2-Slot SKU) .....................................................2-20

Mounting Brackets (Optional)...................................................................2-23

Power (Optional) ......................................................................................2-24

DIO (Optional)..........................................................................................2-25

vii

Preface MS-9A76

3 BIOS Setup...................................................................................3-1

Entering Setup ...........................................................................................3-2

The Menu Bar ............................................................................................3-4

Main ...........................................................................................................3-5

Advanced ...................................................................................................3-6

Boot..........................................................................................................3-12

Security ....................................................................................................3-13

Chipset.....................................................................................................3-20

Power .......................................................................................................3-21

Save & Exit...............................................................................................3-23

Appendix WDT, GPIO, DIO.............................................................. A-1

Abstract..................................................................................................... A-2

WDT Sample Code ................................................................................... A-3

Digital I/O Connector................................................................................. A-5

1-1-1

Thank you for choosing the MS-9A76, a high-performance automation

computer from MSI.

A highly integrated, rugged system that features versatile I/O capability

and PCIe expansion slots, the MS-9A76 is perfect for a wide variety of

industrial applications, including machine automation, video surveillance,

facility environment monitoring, intelligent transportation, etc.

1Overview

1-2

Overview MS-9A76

System Overview

4-Slot SKU 2-Slot SKU

hSystem I/O & Controls

Indice

Manuali PC industriale popolari di altre marche

Chipsee

Chipsee PPC-A72-101 Manuale utente

Advantech

Advantech UNO-2184G Manuale utente

Stackrack

Stackrack THOR200 Manuale utente

Moxa Technologies

Moxa Technologies DA-682C Series Manuale utente

Nodka

Nodka eBOX-3000-ETC Manuale utente

Siemens

Siemens SIMATIC IPC627E Manuale utente

Artila

Artila Matrix-516 Manuale utente

Siemens

Siemens SIMATIC Rack PC 840 V2 Manuale utente

Advantech

Advantech IPPC-6152A Manuale utente

Beckhoff

Beckhoff CX9020 Manuale utente

Dell

Dell Embedded Box PC 5000 Manuale utente

IBASE Technology

IBASE Technology ASB200-918 Series Manuale utente

Lenovo

Lenovo ThinkCentre M90q Manuale del proprietario

IXXAT

IXXAT Econ 100 Manuale utente

Kontron

Kontron KBox A-151-TGL Manuale utente

AXIOMTEK

AXIOMTEK ICO500-518 Series Manuale utente

JLT

JLT 1214N Manuale utente

Beckhoff

Beckhoff C6925 Manuale utente