MSI MS-98L1 Manuale utente

MS-98L1

(v1.x) Industrial Computer Board

ii iii

Preface MS-98L1

a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names

mentioned may be trademarks of their respective owners. No warranty as to

accuracy or completeness is expressed or implied. MSI reserves the right to

make changes to this document without prior notice.

Revision History

Revision Date

V1.0 2019/07

Technical Support

If a problem arises with your product and no solution can be obtained from

the user’s manual, please contact your place of purchase or local distributor.

Alternatively, please visit https://www.msi.com/support/ for further guidance.

ii iii

Preface MS-98L1

Safety Instructions

￭Always read the safety instructions carefully.

￭Keep this User’s Manual for future reference.

￭Keep this equipment away from humidity.

￭Lay this equipment on a reliable at surface before setting it up.

￭The openings on the enclosure are for air convection hence protects the

equipment from overheating. DO NOT COVER THE OPENINGS.

￭Make sure the voltage of the power source and adjust properly 110/220V

before connecting the equipment to the power inlet.

￭Place the power cord such a way that people can not step on it. Do not place

anything over the power cord.

￭Always Unplug the Power Cord before inserting any add-on card or module.

￭All cautions and warnings on the equipment should be noted.

￭Never pour any liquid into the opening that could damage or cause electrical

shock.

￭If any of the following situations arises, get the equipment checked by

service personnel:

▶The power cord or plug is damaged.

▶Liquid has penetrated into the equipment.

▶The equipment has been exposed to moisture.

▶The equipment does not work well or you can not get it work according

to User’s Manual.

▶The equipment has dropped and damaged.

▶The equipment has obvious sign of breakage.

￭DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT

UNCONDITIONED, STORAGE TEMPERATURE ABOVE 60oC, IT MAY

DAMAGE THE EQUIPMENT.

iv v

Preface MS-98L1

Chemical Substances Information

In compliance with chemical substances regulations, such as the EU REACH

Regulation (Regulation EC No. 1907/2006 of the European Parliament and the

Council), MSI provides the information of chemical substances in products at:

https://www.msi.com/html/popup/csr/evmtprtt_pcm.html

Battery Information

European Union:

Batteries, battery packs, and accumulators should not be

disposed of as unsorted household waste. Please use the

public collection system to return, recycle, or treat them in

compliance with the local regulations.

廢電池請回收

Taiwan:

For better environmental protection, waste batteries should

be collected separately for recycling or special disposal.

California, USA:

The button cell battery may contain perchlorate material

and requires special handling when recycled or disposed

of in California.

For further information please visit:

https://www.dtsc.ca.gov/hazardouswaste/perchlorate/

Danger of explosion if battery is incorrectly replaced. Replace only with the

same or equivalent type recommended by the manufacturer.

iv v

Preface MS-98L1

CE Conformity

Hereby, Micro-Star International CO., LTD declares that this device

is in compliance with the essential safety requirements and other

relevant provisions set out in the European Directive.

FCC-B Radio Frequency

Interference Statement

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o󰘯 and

on, the user is encouraged to try to correct the interference by one or more of the

measures listed below:

￭Reorient or relocate the receiving antenna.

￭Increase the separation between the equipment and receiver.

￭Connect the equipment into an outlet on a circuit di󰘯erent from that to

which the receiver is connected.

￭Consult the dealer or an experienced radio/television technician for

help.

Notice 1

The changes or modi󰘰cations not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and AC power cord, if any, must be used in order to

comply with the emission limits.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received, including interference that

may cause undesired operation.

WEEE Statement

Under the European Union (“EU”) Directive on Waste Electrical and

Electronic Equipment, Directive 2012/19/EU, products of “electrical

and electronic equipment” cannot be discarded as municipal waste

anymore and manufacturers of covered electronic equipment will be

obligated to take back such products at the end of their useful life.

vi vii

Preface MS-98L1

CONTENTS

Revision History ............................................................................................ ii

Technical Support.......................................................................................... ii

Safety Instructions.........................................................................................iii

Chemical Substances Information ............................................................... iv

Battery Information....................................................................................... iv

CE Conformity............................................................................................... v

FCC-B Radio Frequency Interference Statement ......................................... v

WEEE Statement .......................................................................................... v

1. Overview.......................................................................................1-1

Specications.............................................................................................1-2

Layout ........................................................................................................1-6

Rear Panel I/O Options..............................................................................1-7

2. Hardware Setup ...........................................................................2-1

Components Reference Guide...................................................................2-2

CPU (Central Processing Unit) ..................................................................2-4

Memory ......................................................................................................2-7

Storage.......................................................................................................2-9

Power Supply........................................................................................... 2-11

Rear Panel I/O .........................................................................................2-13

Connectors...............................................................................................2-15

Jumpers ...................................................................................................2-21

Slots .........................................................................................................2-22

3. BIOS Setup...................................................................................3-1

Entering Setup ...........................................................................................3-2

The Menu Bar ............................................................................................3-4

Main ...........................................................................................................3-5

Advanced ...................................................................................................3-6

Boot..........................................................................................................3-12

Security ....................................................................................................3-13

Chipset.....................................................................................................3-22

Power .......................................................................................................3-23

Save & Exit...............................................................................................3-25

vi vii

Preface MS-98L1

Appendix GPIO WDT BKL Programming ...................................... A-1

Abstract..................................................................................................... A-2

General Purposed IO ................................................................................ A-3

Watchdog Timer ........................................................................................ A-4

LVDS Backlight Brightness Control........................................................... A-5

SMBus Access .......................................................................................... A-6

1-1-1

Thank you for choosing the MS-98L1, an excellent industrial computer

board.

Based on the innovative Intel®Coffee Lake-S/ Coffee Lake-S Refresh

Processor, the MS-98L1 is engineered to provide reliable performance

for a wide variety of industrial applications.

1Overview

1-2 1-3

Overview MS-98L1

Specications

Processor

■SKU1 (C246) supports 8th Gen Intel® Coffee Lake-S Processors (Maximum

95W)

-Intel® Xeon E-2176G/E-2124G

-Intel® Core i3-8100

-Intel® Pentium G5400

-Intel® Celeron G4900

■SKU1 (C246) supports 9th Gen Intel® Coffee Lake-S Refresh Embedded

IOTG Processors (Maximum 65W)

-Intel® Xeon E-2278GEL

-Intel® Core i7-9700E/i7-9700TE

-Intel® Core i5-9500E/i5-9500TE

-Intel® Core i3-9100E/i3-9100TE

■SKU2 (Q370), SKU3 (H310), SKU4 (H310) support 8th Gen Intel® Coffee

Lake-S Processors (Maximum 95W)

-Intel® Core i7-8700/i7-8700T

-Intel® Core i5-8500/i5-8500T

-Intel® Core i3-8100/i3-8100T

-Intel® Pentium G5400/5400T

-Intel® Celeron G4900/G4900T

■SKU2 (Q370), SKU3 (H310), SKU4 (H310) support 9th Gen Intel® Coffee

Lake-S Refresh Embedded IOTG Processors (Maximum 65W)

-Intel® Core i7-9700E/i7-9700TE

-Intel® Core i5-9500E/i5-9500TE

-Intel® Core i3-9100E/i3-9100TE

PCH

■Intel® C246/Q370/H310 Express Chipset

Memory

■2 * DDR4 SO-DIMM slots

■Dual-Channel DDR4 ECC/Non ECC memory up to 2666MHz

■Max 32GB

Network

■SKU1 (C246)

-1 * Intel® I219-LM GbE

-3 * Intel® I210-AT GbE

■SKU2 (Q370)

-1 * Intel® I219-LM GbE

-1 * Intel® I210-AT GbE

■SKU3 (H310)

-1 * Intel® I219-LM GbE

-3 * Intel® I211-AT GbE

■SKU4 (H310)

-1 * Intel® I219-LM GbE

-1 * Intel® I211-AT GbE

Indice

Manuali PC industriale popolari di altre marche

Chipsee

Chipsee PPC-A72-101 Manuale utente

Advantech

Advantech UNO-2184G Manuale utente

Stackrack

Stackrack THOR200 Manuale utente

Moxa Technologies

Moxa Technologies DA-682C Series Manuale utente

Nodka

Nodka eBOX-3000-ETC Manuale utente

Siemens

Siemens SIMATIC IPC627E Manuale utente

Artila

Artila Matrix-516 Manuale utente

Siemens

Siemens SIMATIC Rack PC 840 V2 Manuale utente

Advantech

Advantech IPPC-6152A Manuale utente

Beckhoff

Beckhoff CX9020 Manuale utente

Dell

Dell Embedded Box PC 5000 Manuale utente

IBASE Technology

IBASE Technology ASB200-918 Series Manuale utente

Lenovo

Lenovo ThinkCentre M90q Manuale del proprietario

IXXAT

IXXAT Econ 100 Manuale utente

Kontron

Kontron KBox A-151-TGL Manuale utente

AXIOMTEK

AXIOMTEK ICO500-518 Series Manuale utente

JLT

JLT 1214N Manuale utente

Beckhoff

Beckhoff C6925 Manuale utente