Mpow BH261 Manuale utente
Bluetooth Transmitter
User Manual
EN FR DE ES IT
BT2BT1
English
Français
Deutsch
Español
Italiano
4
11
17
23
29
packages
×1 ×1
×1
×1 ×1
BT2
BT1
01
Diagram
Multifuction Button Power Indicator Light
EN
BT2
BT1
1
12
BT1 Bluetooth Pairing
Indicator Light
3BT2 Bluetooth Pairing
Indicator Light
4
Micro USB Charging Port
5AUX Audio Port
6
2
3
5
6
4
Bouton Multifuction Voyant d'Alimentation
FR
12
Voyant d'Appariement
Bluetooth BT1
3Voyant d'Appariement
Bluetooth BT2
4
Port de Chargement
Micro USB
5 AUX Audio Port6
02
Multifunktionstaste Stromanzeige
DE
1 2
BT1 Bluetooth
Verbindungsanzeige
3BT2 Bluetooth
Verbindungsanzeige
4
Micro USB Aufladestation
5AUX Audioanschluss
6
Botón de Multiplicación Luz indicadora de
encendido
ES
12
BT1 Luz de acoplamiento
Bluetooth
3BT2 Luz indicadora de
emparejamiento Bluetooth
4
Micro USB Puerto de carga de
5Puerto de audio AUX
6
Tasto Multifunzione Indicatore Luminoso
di Alimentazione
IT
1 2
BT1 Indicatore di
Bluetooth Accoppiamento
3BT2 Indicatore di
Bluetooth Accoppiamento
4
Micro USB Porta di Ricarica
5Porta Audio Aux
6
03
Specifications
Low Latency Function
1.Power On / Power Off
Bluetooth Version V5.0
Bluetooth Chip CSR 8675
Product Model BH261
Bluetooth Range 15 meters
Bluetooth Protocol A2DP
Frequency Range 2.402 GHz～2.480 GHz
Codecs aptX™ HD, aptX™ low latency
aptX™ and SBC
EN
BH261 supports aptX™ HD (APTX HD), aptX™ low latency (APTX LL)
or aptX™(APTX). You can experience the low latency function only
if your Bluetooth headphone, Bluetooth speaker etc. support
APTX HD, APTX LL or APTX.
long press for 3 s to power on or off ;
short press to activate pairing mode ;
long press for 6 s to clear pairing list ;
Multifuction Button:
04
2.Enter Pairing Mode
A: Plug to power on BH261 with the blue Power indicator light “ ”
staying on. Then it enters pairing mode with the BT1 indicator
light flashing.
A: Unplug the power cable, BH261 will power off automatically with
Power indicator light off.
B: In power-on state, long press the Multifunction button for 3
seconds to turn it off.
Turn on BH261, short press the Multifunction button to enter pairing
mode with the BT1 or BT2 indicator light flashing blue quickly.
B: In power-off state with BH261 plugged, long press the Multifunction
button for 3 s to turn it on, then the Power indicator light stays on.
Power On:
Power Off:
05
AUX
AUX
RCA
3.Connection to the First Bluetooth Headphone
4.Connection to the Second Bluetooth Headphone
1.Connect BH261 to a television or non-Bluetooth computer via a
3.5 mm audio cable.
2. After BH261 powers on, it enters pairing mode automatically
with the BT1 indicator light flashing blue quickly. The BT2
indicator light will not light on.
3 .Turn on your Bluetooth headphone or Bluetooth speaker etc. and
activate pairing mode. Note: Usually, your headphone’s indicator
light will flash red and blue alternately or flash blue quickly.
1.After BH261 has been connected to the first Bluetooth headphone
or Bluetooth speaker, turn on your second device and activate
pairing mode (Note: Usually, its indicator light will flash red and
blue alternately or flash blue quickly).
5 . When the above connection is complete, you can enjoy music or
TV program via your Bluetooth headphone or Bluetooth speaker.
4 .The distance between BH261 and Bluetooth headphone or
Bluetooth speaker should be within 1 meter. It may take 5-30
seconds to complete the connection. The BT1 indicator lights for
different codecs can be shown as follows:
A: The BT1 blue indicator light stays on (SBC transmission).
B: The BT1 green indicator light stays on (APTX or APTX LL or
APTX HD transmission)
06
5. Bluetooth Reconnection
6.Clear Pairing List
2. Short press the Multifunction button on BH261. And it will enter
pairing mode with the BT2 indicator light flashing blue quickly. The
first connected device won’t be affected, and can function normally.
3. Narrow the distance between BH261 and the second device, such as
Bluetooth headphone, speaker etc. (within 1 m). It may take 5-30
seconds to complete the connection to the second device. And the
corresponding indicator lights for different codecs can be shown as
follows:
1. Reboot BH261, and it will enter reconnection state: reconnect to last
two paired devices by priority.
(Note: After you hold the Multifunction button for 3 s, the Power
1. In power-off state, long press the Multifunction button for 6 s until 3
indicator lights stay on simultaneously for 1 s to clear pairing list
2 . If BH261 fails to reconnect in 22 seconds, it will enter pairing mode
automatically; you can also short press the Multifunction button to
enter pairing mode at once.
A: The BT1 and BT2 indicator lights will stay blue (SBC transmission:
if either headphone doesn’t support APTX).
B: The BT1 and BT2 indicator lights will stay green (APTX transmission:
both headphones support APTX).
07
7.Charging
Note
indicator light will stay on and BT1 indicator light flashes).
Then, BH261 powers on in pairing mode.
2 . In power-on state, long press the Multifunction button for 6s
until 3 indicator lights stay on for 1 s to clear pairing list (Note:
After you hold the Multifunction button for 3 s, BH261 powers
off with indicator lights off). Then, BH261 powers off.
Please charge BH261 via an adapter (above 5V/0.5A) or
USB charging port.
.If BH261 can’t be paired with two devices. Reboot BH261 and
try pairing again.
.It’s recommended to use two headphones with the same
chips, which can avoid possible intermittent music, no sound
or disconnection etc.
.BH261 cannot be paired with smartphones or other similar
devices. It can only be paired to Bluetooth headphone or
Bluetooth speaker.
.For a better music quality, it’s recommended to select head-
phones of a same model when pairing BH261 to two headp-
hones simultaneously.
08
Indice
Lingue:
Altri manuali Mpow Trasmettitore
