MTD Troy-Bilt TB 360 Guida

Manuali Taglia erba popolari di altre marche

RHINO

RHINO 1958 Manuale utente

Wolf Garten

Wolf Garten Compact plus 40 B Manuale utente

Cub Cadet

Cub Cadet LTX 1045 Manuale utente

Craftsman

Craftsman 917.378461 Manuale utente

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manuale utente

Challenge

Challenge CH18V2 Istruzioni operative

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manuale utente

DEWEZE

DEWEZE ATM-725 Manuale operativo

Weed Eater

Weed Eater 180083 Manuale utente

Husqvarna

Husqvarna Poulan Pro PP185A42 Manuale utente

Better Outdoor Products

Better Outdoor Products Quick Series Manuale utente

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manuale operativo

Toro

Toro Groundsmaster 3505-D Manuale utente

Dennis

Dennis FT 610 Manuale utente

AIRFORCE

AIRFORCE F-15 Gen 3 Manuale utente

Toro

Toro 74806 Manuale utente

Stihl

Stihl RMA 443 PV Manuale utente

Yard-Man

Yard-Man 3700-0 Manuale utente

A. Hold the blade control handle against

the premium drive control.

B. Slowly pull starter rope handle from engine and

slip starter rope into the rope guide.

C. Tighten rope guide wing knob.

D. Use clips to secure cables to lower handle.

778-13238B© 2015 12ABD3B

Note: Refer to your Operator’s Manual

for instructions on attaching the grass collector.

Note: Refer to your Operator’s Manual

for instructions on attaching the grass collector.

Note: Refer to your Operator’s Manual

for instructions on attaching the grass collector.

Starter

Rope Handle

Blade Control Handle

Premium Drive Control

Wing Nuts

T-Bolt

A. Remove the wing nuts and carriage bolts

securing the upper handle to the lower

handle.

A

B. Remove T-bolts from

the handle brackets. A

B

B

Pivot the upper

handle upward.

Pull upward

on the handle

until the

holes in lower

handle line up

with the holes

in the handle

bracket.

A. Insert the T-bolts removed in Step 1B

through the handle brackets to secure

the handle in place.

B. Secure upper handle

to lower handle with

wing nuts (on outside)

and carriage bolts

removed Step 1A.

A

B

D

A

C

B

14

2

5

3

READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.

PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.

IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY

AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING . Need Help? Call 1-888-TO-HELP-U

778-13238B© 2015 12ABD3B

Oil Fill /

Dipstick Gas Fill

Fill fuel tank with clean, fresh gasoline. Do not

fill above the base of fuel tank neck.

Pour the entire contents of the oil bottle (supplied)

into the oil fill. Check the oil level using the

dipstick. (Refer to the Operator’s Manual)

While standing behind the machine, pivot the Blade

Control Handle against the premium drive control.

Grasp the starter rope handle and pull with quick,

full-arm stroke. If the engine does not start after three

pulls, wait a few minutes and repeat.

Make sure the spark plug boot is connected to

the spark plug before attempting to start.

Spark Plug Boot

68

79

READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.

PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.

IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY

AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING . Need Help? Call 1-888-TO-HELP-U