MWf Aqua Manuale utente
USER’S MANUAL FOR
Metal and Water Finder
User’s Manual
Page
Metal and Water Finder
Contents
1
Contents
Technical specification
Safety information
Device parts
Interfaces and components of Device
Overview
Assembly
Setup wizard
Page 1
Page 2
Page 3
Page 5
Page 7
Page 8
Page 10
Page 11
Start searching Page 13
Notes Page 17
The user must practice before starting the detecting operations and
discoveries
Store in Cool and dry place 15-40 C 5%-75% humidity Read & Understand
The User's manual
before using this device
Page
Safety information
2
The operating in high voltage areas
would limit the results and
performance
Don't operate two devices with
same method of search at the
same place
The operator Must remove any
metals that might affect the
opreatin eg:Rings,watch, belt....
Any attempt to tamper the device
or unapproved maintenance
would void the warranty
For best power endurance and
reliability. use heavy duty and high
quality batteries thats for the devices
which works on removable batteries
Don't store in high temperature or
high humidity
The cell signal interferes with the
device signal, so turn off the cell
while operating
Disconnect the batteries before
long time storage
Page
Technical specification
3
Bluetooth none
Wireless: none
Search system : long distance sensing system (LDS)
Operating processor: MICROCONTLLER PIC18
Operating frequency: From 1 kHz to 9 kHz
4AAA batteries 1.5 volts / Equivalent of -6volt interchangeable
Power consumption: Maximum of consumption 25 mAh
Battery life: 32 work hours
Charger: none
Display Type: LEDs Interface
Specialized to detects: Natural water – salty water – mineral water – all types of water.
Targets Discrimination: Yes
Target Selection System: Yes, can choose the target type before the start search
Depth Search: 200m, With controlling system in the depth level
Distance Search: 200m, With controlling system in the distance level
Search principle:
Digital Frequency Signal Processing (DFSP) / To Receiving
Electrostatic Fields of the targets
Results feedback:
Through orientation toward to the target location accompa-
nied by acoustic Alerts
Power:
Technical specification
Page 4
Voice alerts: Yes
Vibrating alert: Yes
Operating temperature: From -15° C to 60° C
Storage temperature: From -15° C to 40° C
Humidity:
It can be stored and work in the degree rate of air humidity
of level 90%.
Weight: Compound: 700 gr – disjointed in the bag: 1 kg
Dimensions: 16X9.5X2.5 cm
Bag dimensions: 20X15X5 cm
Yes, through the Smart LDEs interface to locate the target path.
Automatic smart
guidance system:
Page
Device parts
5
Antennas is responsible for transmit and receive signals and
searching waves. It has a special and unique properties .
Transceiver Antennas
Coms with the device . Used to carry the device through for
the searching process, it has capability to rotation 360 degree.
Handel Grip
The unit which is responsible for adjusting the device and
setting inaddition to full exploration search through this it.
Main Control Unit
25m
200m
150m
100m
50m
Page
Interfaces and components of Device
6
1
2
3
4
5
6
1
10
2
3
12
11
6
8
9
5
4
25m
200m
150m
100m
50m
7
Front-end
7
8
9
10
11
12
Signal port ,connected with antennas
User interface.
Depth levels interface .
Distance levels interface .
Target type interface .
Control buttons.
Sound and vibration controlling button
Scan button
LED Indicators for signal.
Battery level indicators.
Selection keys (depth, distance & target)
On / Off button.
Interfaces and components of Device
Page 7
13
14
15
13
14
Backend
15
Handle socket.
Battery compartment.
Audio out.
Page
Overview
8
Aqua is working on remote sensing system (LDS) developed and compact
with voice selection system to water path and point.
The Aqua device features in high precision waves to identify and locate
underground waters with high specific. Where the device can locate targets
from a distance of 200 meters forward at 360 degree angle with precise
control in distance search front end.
Aqua device search depth up to 200m below the surface of the earth with
strict control on deep research of device control interface the device of
features a small size and ease of use. Where you can fit in your pocket and
navigates it conveniently and easily any one can use it without having any
experience or knowledge in the detectors.
The principle of search depends on digital frequency signal processing
(DFSP) to receive the energy of static electric field from the targets.
Provider device automatic tuning system (ATS) to operate in all types of
terrain, rocky soils, mountainous, sandy and clay.
Page
Overview
9
This electronic device works on water finder technology transmitter and receiver. It
sends waves and receives at the same time, the device turn research and
detection of groundwater by revealing waters partial frequency, and energy
electro-static (static electricity) around in the water , make up groundwater stored
and surrounding soil and are gaining in the underground streams and areas of
static electricity gained from the soil through the soil influenced by different
currents such as power stations, broadcasting stations, radio, satellite, lightning,
and a lot of generated objects of electric power , energy static.
This device, however, depends on detection of groundwater in the ground through
the influence of waves emerging from the device by electrostatic fields formed on
the water as a result he was underground and water frequency at the same time.
Device waves working device waves to inflate the size of these fields and
escalation to the surface of the soil, which helps the device to locate the water
from long distance, the device receives a signal amplification and heading toward
the water site directly and precise destination.
Soil
Water
Indice
Altri manuali MWf Accessori per fotocamere
