MYE MWC2-9 Manuale utente

Radio

MWC2-9 900MHz Receiver

with FM Radio O

tion

MWC2-9

Operation Manual

www.myeclubtv.com

manMWC29_V7

FCC Compliance Statement…………………..…………. 3

Canada Compliance Statement………………………….. 3

Specifications………………………………………….… 3

Receiver Orientation (Front / Rear)…………………… 4

Keypad – Key Identification………………………….… 5

Main Features…………………………………………… 5

Display and Icon Identification…………….…………… 6

Programming - Near / Far Reception Setting…………… 6

Programming the Receiver (Auto Programming)………. 7

Programming the Receiver (Manual) ………………… 7

FM Radio, FM Radio Disable…………………………..… 8

Attaching the Receiver……………………..…………...… 9

Intellijack…………………….……………………………. 11

Warranty Information…………..…………..….……..…… 12

CONTENTS

NOTE: This equipment has been tested and found to comply with the limits for a class B digital devise

pursuant to part 15 of the FCC rules.

These limits are designed to provide reasonable protection against harmful interference when the

equipment is operated in a residential environment. This equipment generates, uses and can radiate

radio frequency energy and if not installed and used in accordance with the instruction manual may

cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the unit off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiver.

•Increase the separation between the equipment and the receiver.

•Connect the equipment to an outlet different from that which the receiver is connected.

•Consult your MYE dealer or experienced Radio / TV technician

FCC Compliance Statement

INDUSTRY CANADA COMPLIANCE STATEMENT

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Canada Compliance Statement

900 MHz Frequency Range 903.000 TO 926.0000 MHz

FM Frequency Range 87.5 to 107.9 MHz

Input Sensitivity (20 dB SINAD) -85 dBm typical

Modulation FM Stereo deviation +/- 75KHz

Stereo Separation >25dB

Equalization Bass Boost, Flat

Audio Frequency Response 20 Hz to 18 kHz

Frequency Entry Scroll up/down.

Power 4.75 VDC TO +12VDC

SPECIFICATIONS

The MYE MWC2-9 Receiver allows the user to listen to a TV or other audio source connected to a compatible

900MHz transmitter. It can also be used as an FM radio receiver. The MWC2-9 is powered by using a MYE

Entertainment CSAFE cable plugged directly into any standard cardio CSAFE port or MYE 9 Volt AC Adapter.

Product Description

RECEIVER ASSEMBLY - FRONT VIEW

RECEIVER ASSEMBLY & MOUNTING - REAR VIEW

LCD DISPLAY

HEADPHONE JACK

KEYPAD

FRONT FLANGE

CABLE EXIT HOLES

BAR CODE SERIAL NUMBER

AND RATING LABEL

CSAFE CABLE RJ45 JACK

CABLE BLOCKS

REAR FLANGE

MOUNTING BASE

CABLE EXIT HOLES

FRONT MOUNTING SCREWS

UNSCREW TO RELEASE the

MOUNTING BASE ASSEMBLY.

(PLEASE READ “ATTACHING

THE RECEIVER” PGS. 8/9)

FRONT MOUNTING

SCREWS

MYE Wireless 900MHz TV Receiver with FM option.

Model: MWC2-9

Main Features:

TV Button

Selects audio from TV’s connected to

900MHz transmitters.

FM Button

Selects audio from FM broadcast radio.

Channel Up/Down Buttons

Selects next desired audio channel Up or Down.

Volume Up/Down Buttons

Controls Volume Level Up or Down

Scan

Allows user to scan automatically up to next

available (US) FM radio channel.

MWC2-9 KEY IDENTIFICATION

VOLUME UP

VOLUME DOWN

CHANNEL UP

CHANNEL DOWN

MUTE

PREVIOUS CHANNEL

Previous Channel

Allows user to jump back to the

previously selected FM channel.

Power Button

Turns Receiver ON/OFF

Mute

Mute ON or OFF

EQ Select

Selects between 5 preset EQ tones:

Flat, Rock, Jazz, Classical & Bass

The MYE MWC2-9 Receiver allows the user to listen to a TV or other audio source connected to a compatible

900MHz transmitter. It can also be used as an FM radio receiver. The MWC2-9 is powered by using a MYE

Entertainment CSAFE cable plugged directly into any standard cardio CSAFE port or MYE 9 Volt AC Adapter.

EQ SELECT

POWER ON/OFF

SCAN

900MHz Mode Select

FM RADIO Mode Select

Programming - Far/Near Reception

This feature provides the ability to set the reception sensitivity of each MYE

MWC2-9 receiver depending on the proximity between the receiver and

transmitter.

Far Mode: (Default): The far mode is the most widely used and will accommodate

the majority of installations.

Near Mode: The near mode is used primarily in situations where the MWC2-9

receiver is positioned very close to one or more transmitters. The Near Mode is

recommended when receivers are installed between 1 and 5 feet from a

transmitter.

Far / Near Mode

Note: The factory default is set to “Far” (HI).

To change to “Near” mode (LO):

1. Start with the MWC2-9 in the OFF position.

2. With the unit OFF, press and hold the Volume UP button.

3. While holding the Volume UP button, press and release the POWER

button.

4. Wait three seconds while continuing to hold Volume UP button until ‘LO’ is

appears on the display.

5. To revert back to Far mode simply follow steps 1-4 until “HI” appears on

display.

DISPLAY and ICON IDENTIFICATION

FAULTY

HEADPHONE

JACK ICON

VOLUME

LEVEL

INDICATOR

CHANNEL

ICON

CURRENT

CHANNEL OR

FM FREQUENCY

900MHz MODE

SELECTED

MUTE “ON”

EQ PRESETS

FREQUENCY

PRESET ICON

FM FREQUENCY

ICON

FM RECEIVER

MODE

SELECTED

Programming

The MYE MWC2-9 receiver must be programmed to detect and lock in the MYE

Entertainment transmitters as well as the other brands of transmitters listed

below. The MWC2-9 features both “auto” and “manual” program modes. In the

auto mode the MWC2-9 will automatically search for and program in your

transmitters. The manual mode provides the ability to add or erase a specific

transmitter channel or unwanted frequency caused by spurious emissions or

other local elements.

Auto Program Mode

1. Press Channel Down and Volume Up buttons simultaneously for three

seconds until “P-1” appears on the display.

2. Press the “Ch Up ” button to select one of the following program modes:

P-1 = MYE Entertainment 900MHz Transmitters

P-2 = Cardio Theater LCS 900MHz Transmitters

P-3 = Cardio Theater / Enercise xTV 900MHz Transmitters

P-4 = BroadcastVision 900MHz Transmitters

3. After selecting the Transmitter Mode, press the TV button to auto-scan

and lock transmitters.

4. Press the Channel Up or Channel Down buttons to determine all

transmitters have been locked in. NOTE: “PRESET” will appear in the

display when a transmitter channel is programmed.

5. To exit program mode press the EQ button. The display will blink briefly

and then default to first transmitter channel programmed.

Manual Program Mode (Add or Delete Frequencies)

1. Press Channel Down and Volume UP buttons simultaneously for three

seconds until “P-1” appears on the display.

2. Press the “Ch Up” button to select one of the following transmitter program

modes listed above.

3. Press the EQ button

4. Press CHANNEL UP/DOWN buttons to scroll through all transmitter

channels.

5. To add or delete a transmitter channel press the “TV” button. NOTE:

“PRESET” will appear in the display when a transmitter channel is

programmed.

6. To exit manual program mode press the EQ button. The display will blink

briefly and will default to first transmitter channel programmed.

FM RADIO

Pressing the “FM” key switches the audio reception mode from 900MHz to FM. The FM

Radio option is set to receive US FM radio broadcasts from 87.5 to 107.9. Use the

SCAN key to scan automatically up to next available FM channel. Use the channel UP /

Down keys to move up / down one FM frequency at a time.

FM RADIO - Disable

The FM Radio function may be disabled (or enabled) by holding down the ‘FM’ button for three

seconds at power up. The factory default for FM Radio is “enabled.”

1. Start with unit OFF. Press and hold the “FM” button.

2. Press power ON button. Wait 3 seconds. FM icon and FM arrow icon ‘►’ are used to

display FM radio mode status.

a. Only the FM arrow icon ‘►’ will display for 3 seconds when FM Radio “disable”

has been selected. When the FM Radio mode has been disabled, the FM icon

will no longer be visible during normal operation.

FM RADIO MODE SELECT (United States – International)

Headphone Removal Monitoring

When the receiver detects that the headphones have been removed for more than ten

seconds, it will automatically return the volume setting of the receiver to a nominal level.

Power Supply Monitoring

When the receiver detects low power input below 4.6vdc it will automatically power down

to a stand-by (off) state.

The FM Radio reception mode may be manually set to receiver FM radio for the United

States or International FM.

1. Start with the unit OFF. Press and hold the “TV” button.

2. Press power ON button.

3. FM frequency mode will cycle to next mode and appear in LCD.

Mode will appear as:

US = United States

In = International

4. To cycle to next FM frequency mode turn the unit OFF.

5. Press and hold the “TV” button.

6. Press power ON button.

The MWC2-9 receiver uses the MYE Entertainment Secure Grip Mounting Band. Mounting the MWC2-9 is now

quick, secure and discrete. It is required that the Secure Grip Mounting Band always be used when installing

MYE Entertainment MWC2 receivers.

Attaching the Receiver

Wrap the Secure Grip Band around the intended

mounting pole and cut to fit. Do not overlap ends or

have a gap over 1/8”. Secure the Grip Band with 1

MYE nylon tie in the center channel. OFFSET the

knuckle of the nylon tie from center by approximately

1/4”. Trim the excess nylon tie completely.

Install the Mounting Base over the nylon tie

knuckle. Insert two MYE nylon ties into the holes

opposite the tie knuckle hole.

Seat the nylon ties into the corresponding

channels of the Secure Grip Band. Pull the nylon ties tight to align all 3 tie knuckles.

Trim all excess nylon tie completely.

Before you begin: Unscrew the MOUNTING BASE ASSEMBLY from the receiver by using the

FRONT MOUNTING SREWS. (See page 3 – Receiver Assembly Front View.)

*USE only MYE Entertainment CSAFE cables with all MYE Entertainment receivers (900MHz, 800MHz or FM).

MYE Entertainment will not be responsible for damage to receivers or cardio equipment when alternate or other

cables are used.

Position and install the Rear Flange onto the

Mounting Base. Interlocking gears assure secure

positioning regardless of the rotation.

Insert one end of the CSAFE* cable into the

RJ45 jack on the back of the receiver assembly.

MYE receivers can be powered by CSAFE ports

on CSAFE compliant cardio equipment or MYE 9

volt power supplies.

Route the CSAFE cable through the appropriate

rubber cable blocks A, B or C depending on

where you need the cable to exit the receiver

flange.

Align and attach the C2 receiver assembly to the

Rear Flange using the Front Flange mounting

screws.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali MYE Ricevitore

MYE

MYE MWC2-8 Manuale utente

Manuali Ricevitore popolari di altre marche

Garmin

Garmin GA 23 Manuale utente

Aiphone

Aiphone PS-12F Manuale utente

IMES

IMES TCS-01CA-PMI Manuale utente

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuale

AMIMON

AMIMON AMN12310 WHDI Manuale utente

Dual

Dual DMCPA79BT Istruzioni operative

Sound Associates

Sound Associates SA652P Manuale utente

Sherwood

Sherwood NewCastle R-772 Manuale utente

Audio

Audio A10-RX Series Manuale utente

AllSee

AllSee PushShare PSRV1.1 Manuale utente

DEMAG

DEMAG DRC-DR D2 Manuale utente

Teleco

Teleco TVRCL868A02 Manuale utente

Bosch

Bosch RF3222E Manuale utente

Kramer

Kramer 631R Manuale utente

Xpress

Xpress xmc10 Manuale utente

JVC

JVC KD-MR1BTS Manuale utente

Omega Engineering

Omega Engineering UWTC-REC3 Manuale utente

e-survey

e-survey E300 Pro Manuale utente