NARGESA C2006 Manuale utente
INSTRUCTIONS BOOK
PRADA NARGESA, S.L
Ctra. de Garrigàs a Sant Miquel s/n · 17476 Palau de Santa Eulàlia (Girona) SPAIN
Tel. +34 972568085 · [email protected] · www.nargesa.com
HYDRAULIC SHEAR
C2006
Thank you for choosing our machines
www.nargesa.com
C2006 HYDRAULIC SHEAR INSTRUCTIONS BOOK 2
INDEX
1. CHARACTERISTICS OF THE MACHINE .................................................................................. 4
1.1. Identification of the machine ......................................................................................... 4
1.2. General dimensions ....................................................................................................... 4
1.3. Description of the machine ........................................................................................... 4
1.4. Identification of the machine ........................................................................................ 5
1.5. General features ............................................................................................................ 6
1.6. Description of safety devices .......................................................................................... 7
2. TRANSPORTATION AND STORAGE .................................................................................. 8
2.1. Transportation ................................................................................................................ 8
2.2. Storage conditions ........................................................................................................ 8
3. MANINTENANCE ................................................................................................................... 9
3.1. General Maintenance ..................................................................................................... 9
3.1.1. Oil change …………………………………………………………………………… 9
3.1.2. Lubrication of bolts ………………………………………………………………. 10
3.1.3. Lubrication of the guides ………………………………………………………… 10
3.1.4. Lubrication of the gauge spindles ……………………………………………….. 11
4. INSTALACINSTALLMENT AND START UP .......................................................................... 12
4.1. Location of the machine .............................................................................................. 12
4.2. Dimensions and working site ................................................................................... 12
4.3. Admissible outer conditions ……............................................................................... 13
4.4. Connection to power supply ………………………......................................................... 13
5. HANDLING BOOK ................................................................................................................. 14
5.1. Introduction ................................................................................................................. 14
5.2. Control panel …............................................................................................................. 14
5.3. Feeding of the guillotine ........................................................................................... 15
5.4. Activation of the machine ............................................................................................. 15
5.5. Gauge retraction …….................................................................................................... 18
5.6. Light .............................................................................................................................. 19
5.7. Laser ........................................................................................................................... 19
5.8. Calculator .................................................................................................................... 20
5.9. Automatic mode ........................................................................................................... 20
5.10. Program management ................................................................................................ 22
5.11. Gauge adjustment ...................................................................................................... 24
5.12. Blade adjustment ..................................................................................................... 26
5.13. Lateral length of the cut ............................................................................................. 27
5.14. General emergency .................................................................................................... 27
5.15. Photocell interruption …………................................................................................... 29
5.16. Pump thermal protection ............................................................................................ 29
C2006 HYDRAULIC SHEAR INSTRUCTIONS BOOK 3
5.17. Alarm management ................................................................................................... 30
5.18. Input/output monitoring ............................................................................................... 31
5.19. Material management ................................................................................................ 32
5.20. Import/export parameters, materials and programs ............................................ 33
5.21. Remote service …………………………………………………………………………….. 34
5.22. Touch screen calibration ……………..…………………………………………………… 36
6. WARNINGS ............................................................................................................................. 37
7. ACCESORIES .......................................................................................................................... 38
TECHNICAL ANNEXES
C2006 HYDRAULIC SHEAR INSTRUCTIONS BOOK 4
PRADA NARGESA S. L is not liable for any damage that might occur due to misuse or failure by
users to comply with the safety standards.
1. CHARACTERISTICS OF THE MACHINE
1.1. Identification of the machine
1.2. General dimensions
Picture 1. External dimensions of the machine
1.3. Description of the machine
The guillotine C2006, has been designed specifically for cutting metal sheets.
The manufacturer will not take any responsibility for the damages caused to the machines or the operatives
using it at any other operation different from the ones previously specified.
The C2006 is according to the European regulations and normative for the manufacturing of machinery.
Trademark Nargesa
Type Hydraulic shear
Model C2006
C2006 HYDRAULIC SHEAR INSTRUCTIONS BOOK 5
1.4. Identification of the machine
Laser
Commands control
Polycarbonate
Front protection
Screws to level
the machien
Lifting spot
Power motor
Safety
Photocell
Side protections
Stands for the
entrance of the
metal sheet
Rammers
C2006 HYDRAULIC SHEAR INSTRUCTIONS BOOK 6
Picture 2. Nameplate
1.5. General features
Engine power 5,5 KW / 7,5 CV
Three-phased tension 230/400 V
Cutting Capacity: mild steel 6 mm
Cutting capacity: stailess steel 4 mm
Nº of hammers 10 units
Cutting length 2030 mm
Neck 190 mm
Gauge displacement 700 mm
Strokes per minute 10 strokes
Position accuracy and repeatibility +/- 0,1 mm
Dimensions 2865x2360x1770 mm
Weight 5100 Kg
C2006 HYDRAULIC SHEAR INSTRUCTIONS BOOK 7
Lateral protection to save
access to the cutting blade.
Front protection to save access
to the cutting blade.
ResBack protection
of the top belts.
1.6. Description of safety devices
The fixed safety devices the guillotine C2006 has are lateral to avoid any handling, the front protection
avoids from acceding to the rammers side, Protections in the back side of the machine covering the belts
and pulley of the back top, the outet ramp for the material and the upper protection cover of the piston
moveable part.
Picture 3. Safety devices
Protection covers must not be removed to do the maintenance works. This job must be carried out by
highly qualified technicians. PRADA NARGESA will not accept any responsibility for the damages
caused by not bearing in mind to what has been previously exposed on this book.
C2006 HYDRAULIC SHEAR INSTRUCTIONS BOOK 8
2. TRANSPORTATION AND STORAGE
2.1. Transportation
The lifting of the machine will be carried out by a crane, using the clamping points indicated for that. The
machine will be never lifted by any other side but the indicated one.
Picture 4. Transportation of the machine
2.2. Storage conditions
The machine will not be stored in a place that hasn’t got the following requirements:
* Humidity between 30% and 95% without water condensation.
* Temperature from -25 to 55ºC or 75ºC for a length of time not exceeding 24h (these must be considered
storage conditions)
* It is advisable not to pile up machines or heavy objects on top of it
C2006 HYDRAULIC SHEAR INSTRUCTIONS BOOK 9
WARNING: Stop the machine to make the maintenance.
3. MAINTENACNE
3.1. General maintenance
The maintenance of the Shear implies four operations:
- Oil change
- Lubrication of bolts
- Lubrication of the guides
- Lubrication of the gauge spindles
3.1.1. Oil change
The oil container level must be checked every 1000 hours of work.
The oil level sight-glass is located at the side of the tank. If oil needs to be added, fill until the sight-glass is
completely full.
Replace the hydraulic oil container every 4000 hours of work or 60 months.
Container capacity: 73 liters.
Oil: CEPSA HYDRAULIC HM 68
Once the oil has been changed, it is necessary to start up the machine and activate the pedal in
intermittence by increasing the pressure time gradually until the circuit is full.
Drain plug
Oil dipstick
Oil level sight-glass
Altri manuali per C2006
1
Indice
Altri manuali NARGESA Utensili elettrici
NARGESA
NARGESA C2006 Manuale utente
NARGESA
NARGESA C3006 Manuale utente
NARGESA
NARGESA MX340G Manuale utente
NARGESA
NARGESA MP3003 CNC Manuale utente
NARGESA
NARGESA MP3003 CNC Manuale utente
NARGESA
NARGESA MC400 Manuale utente
NARGESA
NARGESA MX340G Manuale utente
NARGESA
NARGESA MP1400 CNC Manuale utente
NARGESA
NARGESA C3006 Manuale utente
