NARGESA MP3003 CNC Manuale utente
INSTRUCTIONS BOOK
PRADA NARGESA, S.L
Ctra. de Garrigàs a Sant Miquel s/n
17476 PALAU DE STA. EULALIA (GIRONA) SPAIN
Tel. 972 568085 - Fax 972 568320
PRESS BRAKE
MP3003 CNC
Nº SERIE
Thank you for choosing our machines
www.nargesa.com
INSTRUCTIONS BOOK FOR PRESS BRAKE MP3003 CNC 2
ÍNDICE
1. CHARACTERISTICS OF THE MACHINE ...............................................................................
1.1. General dimensions ....................................................................................................
1.2. Description of the machine ..........................................................................................
1.3. Identification of the machine .......................................................................................
1.4. General features ……………….…...............................................................................
1.5. Accessories .................................................................................................................
1.5.1. Description of accessories .............................................................................
1.5.2. Tooling ...........................................................................................................
1.6. Description of safety devices ......................................................................................
2. TRANSPORTATION AND STORAGE ....................................................................................
2.1. Transportation .............................................................................................................
2.2. Storage conditions ……………….................................................................................
3. MANINTENANCE ....................................................................................................................
3.1. General Maintenance ..................................................................................................
4. INSTALLMENT AND START UP ............................................................................................
4.1. Location of the machine ..............................................................................................
4.2. Dimensions and working site …...................................................................................
4.3. Admissible outer conditions ........................................................................................
4.4. Connection to power supply ………….........................................................................
5. DESCRIPTIVE MEMORY ........................................................................................................
5.1. List of parts ..................................................................................................................
5.2. Main cylinder ...............................................................................................................
5.3. Component nº41 .........................................................................................................
5.4. Component nº55 .........................................................................................................
5.5. Upper cylinder .............................................................................................................
5.6. Gauge .........................................................................................................................
5.7. Hydraulic group ...........................................................................................................
5.8. Component nº107 .......................................................................................................
5.9. Electric maps ...............................................................................................................
5.10. Hidraulic map ............................................................................................................
6. PROGRAMMING .....................................................................................................................
6.1. Control panel …...........................................................................................................
6.1.1. Introduction ....................................................................................................
6.1.2. Power supply of the machine .........................................................................
4
4
4
5
6
6
6
7
8
9
9
9
10
10
11
11
11
11
12
13
13
20
22
24
26
28
33
36
38
43
44
44
45
45
INSTRUCTIONS BOOK FOR PRESS BRAKE MP3003 CNC 3
7. MANUAL MODE FOR THE PRESS BRAKE .........................................................................
7.1. Descending speed ……...............................................................................................
7.2. Upper limit …...............................................................................................................
7.3. Lower limit ...................................................................................................................
7.4. Gauge position ............................................................................................................
7.5. Working mode ............................................................................................................
7.6. Operating with the machine ........................................................................................
8. SEMI AUTOMATIC MODE OF THE MACHINE …...................................................................
8.1. Punches ......................................................................................................................
8.2. Dies ............................................................................................................................
8.3. Addition of memories ..................................................................................................
8.4. Selection of memory ..................................................................................................
8.5. Editing the memory .....................................................................................................
8.6. Addition of folding operations ......................................................................................
8.7. Eliminating folding operations .....................................................................................
8.8. Edition of parameters .................................................................................................
9. GENERAL PARAMETERS ......................................................................................................
9.1. Operating with memories ............................................................................................
10. CONFIGURATION MODE OF THE FOLDING MACHINE ....................................................
10.1. Inserting the Pasword ...............................................................................................
10.2. Correction of the ram ................................................................................................
10.3. Correction of the gauge .............................................................................................
10.4. Language selection ...................................................................................................
10.5. Errors record …..........................................................................................................
10.6. Adjustment of limits ...................................................................................................
11. PREVIEWING KEY ……........................................................................................................
12. ADJUSTMENT OF THE BACK GAUGE HANDLES ………..................................................
13. WARNINGS ...........................................................................................................................
14. ANNEX. PRESS BRAKES SAFETY LASER DEVICES .......................................................
47
47
48
48
49
49
50
51
51
52
52
53
54
54
55
55
56
56
59
59
59
60
61
61
61
63
64
65
66
INSTRUCTIONS BOOK FOR PRESS BRAKE MP3003 CNC 4
1. CHARACTERISTICS OF THE MACHINE
1.1. General dimensions
1.2. Description of the machine
The MP3003 CNC press brake, is designed specifically for folding sheet in different degrees, any applica-
tion other than specified above, exonerates the manufacturer from any responsibility for the damage to the
machine or the people who use it.
The CNC MP3003 is according to the European standards and directives for the manufacturing of
industrial Machinery.
INSTRUCTIONS BOOK FOR PRESS BRAKE MP3003 CNC 5
Electric motor
Hydraulic container
Oil emptying cap
1.3. Identification of the machine
Screws to level the
machine
Punch
Die
Control panel
Electric box
Side protection
Lifting point
INSTRUCTIONS BOOK FOR PRESS BRAKE MP3003 CNC 6
1.4. General features
- Motor 9,5 Kw (12CV) at 1460 r.p.m.
- Intensity of 19 A at 400 V / 32 A at 230 V
- Pump 27 l./m.
- Deposit of 100 liters.
- Double acting piston (120 Tm).
- Pressure of the hydraulic pump 210 Kg./cm2
- Total Weight 9000 Kg.
- MotoGauge motor 0,88 KW
- Cleavage of 320 mm.
- Inner Folding length 2700.
- LongitTotal folding length 3050 mm.
- Total displacement of top 700 mm.
- Maximum punch displacement 160 mm.
1.5. Accessories
1.5.1. Description of accessories
The punch and die are treated, ensuring reliability and endurance under normal use. Arrays have different
openings for different thicknesses of sheet metal and bendind radii.
INSTRUCTIONS BOOK FOR PRESS BRAKE MP3003 CNC 7
1.5.2. Tooling
The MP3003 folder, has these two tools by means of which you can perform all kinds of folding operations.
You can place other matrices with higher V, striped punches and Anvils consult the manufacturer.
- 3 die with 4 V’s each for a total length of 3050 mm.
- 3 punches Promecam system with a combined total length of 3050 mm
INSTRUCTIONS BOOK FOR PRESS BRAKE MP3003 CNC 8
Left side protection
Right side protection
1.6. Description of safety devices
Fixed safety devices consisting of CNC press brake MP3003 are the side shields to prevent manipulation
of tooling on the sides and guards at the rear of the machine covering the belts and pulleys of the rear gau-
ge.
You can not remove the protective caps unless it is for maintenance and it should be carried out by techni-
cally trained personnel. PRADA NARGESA will not responsible for damage caused by not adhering to the
afore mention instructions.
INSTRUCTIONS BOOK FOR PRESS BRAKE MP3003 CNC 9
2. TRANSPORTATION AND STORAGE
2.1. Transportation
Lifting should be performed by a crane, on the marking point to that end anchorage. The machine will never
rise by anywhere else other than the specified and provided the two points of the front of the machine will
be used because the weight is found mostly in the front so we will make the machine remain in a horizontal
line when raised.
2.2. Storage conditions
Press brake will not be never stored in a place where the following conditions are not settled:
* Humidity between 30% and 95% non-condensing.
* Temperature -25 to 55 ° C or 75 ° C for periods not exceeding 24 hours (remember that these temperatu-
res are in storage)
* It is advisable not to stack heavy objects on the machines.
* Do not disassemble for storage.
Lifting points to be raised
by a crane
Lifting points to be raised
by a crane
Altri manuali per MP3003 CNC
1
Indice
Altri manuali NARGESA Utensili elettrici
NARGESA
NARGESA C3006 Manuale utente
NARGESA
NARGESA C3006 Manuale utente
NARGESA
NARGESA MP1400 CNC Manuale utente
NARGESA
NARGESA C2006 Manuale utente
NARGESA
NARGESA MC400 Manuale utente
NARGESA
NARGESA MX340G Manuale utente
NARGESA
NARGESA MX340G Manuale utente
NARGESA
NARGESA C2006 Manuale utente
NARGESA
NARGESA MP3003 CNC Manuale utente
