National Instruments NI-9260 Manuale utente
NI-9260 Getting
Started
2022-07-12
Contents
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety Voltages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety Guidelines for Hazardous Voltages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety Guidelines for Hazardous Locations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Electromagnetic Compatibility Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Preparing the Environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
NI 9260 Pinout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
NI-9260 with mini XLR Analog Output Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
NI 9260 with BNC Analog Output Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
NI-9260 Connection Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Overvoltage Protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Where to Go Next. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
NI Services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
ni.com
2
NI-9260 Getting Started
Overview
This document explains how to connect to the NI-9260. In this document, the
NI-9260 with BNC and the NI-9260 with mini XLR are referred to inclusively as the
NI-9260.
Note Before you begin, read the NI-9260 Safety, Environmental, and
Regulatory Information document on ni.com/manuals and complete the
soware and hardware installation procedures in your chassis
documentation.
Note The guidelines in this document are specific to the NI-9260. The
other components in the system might not meet the same safety ratings.
Refer to the documentation for each component in the system to
determine the safety and EMC ratings for the entire system.
Safety Guidelines
Caution Observe all instructions and cautions in the user documentation.
Using the product in a manner not specified can damage the product and
compromise the built-in safety protection.
Attention Suivez toutes les instructions et respectez toutes les mises
en garde de la documentation d'utilisation. L'utilisation du produit de
toute autre façon que celle spécifiée risque de l'endommager et de
compromettre la protection de sécurité intégrée.
Safety Voltages
AO-to-COM voltage 3.16 V RMS (±4.68 V peak) maximum
© National Instruments 3
NI-9260 Getting Started
Overvoltage protection ±30 V
Channel-to-earth ground ±30 V maximum
Isolation Voltages
Channel-to-channel None
Channel-to-earth ground None
Safety Guidelines for Hazardous Voltages
Caution Ensure that hazardous voltage wiring is performed only by
qualified personnel adhering to local electrical standards.
Caution Do not mix hazardous voltage circuits and human-accessible
circuits on the same module.
Caution Ensure that devices and circuits connected to the module are
properly insulated from human contact.
Caution When module terminals are hazardous voltage LIVE (>42.4 Vpk/60
V DC), you must ensure that devices and circuits connected to the module
are properly insulated from human contact.
Safety Guidelines for Hazardous Locations
The NI-9260 is suitable for use in hazardous locations; , and hazardous locations;
and nonhazardous locations only. Follow these guidelines if you are installing the
NI-9260 in a potentially explosive environment. Not following these guidelines may
result in serious injury or death.
Caution Do not disconnect I/O-side wires or connectors unless power has
been switched o or the area is known to be nonhazardous.
ni.com
4
NI-9260 Getting Started
Caution Do not remove modules unless power has been switched o or
the area is known to be nonhazardous.
Caution Substitution of components may impair suitability for Class I,
Division 2, or Zone 2.
Caution The system must be installed in an enclosure certified for the
intended hazardous (classified) location, having a tool secured cover/door,
where a minimum protection of at least IP54 is provided.
Special Conditions for Hazardous Locations Use in Europe and
Internationally
The NI-9260 has been evaluated as equipment under DEMKO ATEX and is IECEx
certified. Each NI-9260 is marked and is suitable for use in Zone 2 hazardous
locations, in ambient temperatures of -40 °C ≤ Ta ≤ 70 °C. If you are using the NI-9260
in Gas Group IIC hazardous locations, you must use the device in an NI chassis that
has been evaluated as Ex nC IIC T4, Ex IIC T4, Ex nA IIC T4, or Ex nL IIC T4 equipment.
Caution Transient protection shall be provided that is set at a level not
exceeding 140% of the peak rated voltage value of 85 V at the supply
terminals to the equipment.
Caution The system shall only be used in an area of not more than
Pollution Degree 2, as defined in IEC/EN 60664-1.
Caution The system shall be mounted in an ATEX/IECEx-certified
enclosure with a minimum ingress protection rating of at least IP54 as
defined in IEC/EN 60079-15.
Caution The enclosure must have a door or cover accessible only by the
use of a tool.
© National Instruments 5
NI-9260 Getting Started
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits
for electromagnetic compatibility (EMC) stated in the product specifications. These
requirements and limits provide reasonable protection against harmful interference
when the product is operated in the intended operational electromagnetic
environment.
This product is intended for use in industrial locations. However, harmful
interference may occur in some installations, when the product is connected to a
peripheral device or test object, or if the product is used in residential or
commercial areas. To minimize interference with radio and television reception and
prevent unacceptable performance degradation, install and use this product in strict
accordance with the instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved
by National Instruments could void your authority to operate it under your local
regulatory rules.
Special Conditions for Marine Applications
Some products are approved for marine (shipboard) applications. To verify marine
approval certification for a product, visit ni.com/product-certifications, search by
model number, and click the appropriate link.
Notice In order to meet the EMC requirements for marine applications,
install the product in a shielded enclosure with shielded and/or filtered
power and input/output ports. In addition, take precautions when
designing, selecting, and installing measurement probes and cables to
ensure that the desired EMC performance is attained.
Preparing the Environment
Ensure that the environment in which you are using the NI-9260 meets the following
specifications.
Operating temperature (IEC 60068-2-1, IEC 60068-2-2) -40 °C to 70 °C
ni.com
6
NI-9260 Getting Started
Operating humidity (IEC 60068-2-30) 10% RH to 90% RH, noncondensing
Pollution Degree 2
Maximum altitude 5,000 m
Indoor use only.
Note Refer to the NI-9260 Specifications on ni.com/manuals for
complete specifications.
NI 9260 Pinout
CHASSIS GND
AO0–
AO0+ AO0+
AO0–
AO1+
AO1–
CHASSIS GND
A10–
A10+
Signal Description
AO+ Positive analog output signal connection
AO- Negative analog output signal connection
Chassis GND Chassis ground connection
Table 1. Signal Descriptions
NI-9260 with mini XLR Analog Output Connection
© National Instruments 7
NI-9260 Getting Started
Load
NI 9260
with mini XLR
AO+
AO–
IN+
IN–
CHASSIS
GND
3
21
Note You can only use the NI-9260 with mini XLR with dierential
instruments.
Notice Do not connect AO- to chassis ground on the NI-9260 with mini
XLR. Connecting this pin to chassis ground will short circuit the output.
Notice Do not connect the NI-9260 with mini XLR to a ground referenced
single-ended instrument. Refer to the Circuitry section in the device
datasheet on ni.com/manuals for further information.
NI 9260 with BNC Analog Output Connections
NI 9260 with BNC Load
AO+
AO–
IN+
IN–/GND
50 Ω
NI-9260 Connection Guidelines
■ Make sure that devices you connect to the NI-9260 are compatible with the
module specifications.
■To minimize ground noise, make sure you connect the chassis ground to
earth ground.
Overvoltage Protection
The NI-9260 provides overvoltage protection for each channel.
ni.com
8
NI-9260 Getting Started
Note Refer to the NI-9260 Specifications on ni.com/manuals for more
information about overvoltage protection.
Where to Go Next
CompactRIO NI CompactDAQ
Located at ni.com/manuals
RELATED INFORMATION
C Series Documentation
& Resources
ni.com/info cseriesdoc
Services
ni.com/services
Installs with the software
NI 9260 Datasheet
NI-RIO Help
LabVIEW FPGA Help
NI 9260 Datasheet
NI-DAQmx Help
LabVIEW Help
NI Services
Visit ni.com/support to find support resources including documentation,
downloads, and troubleshooting and application development self-help such as
tutorials and examples.
Visit ni.com/services to learn about NI service oerings such as calibration options,
repair, and replacement.
Visit ni.com/register to register your NI product. Product registration facilitates
technical support and ensures that you receive important information updates from
NI.
NI corporate headquarters is located at 11500 N Mopac Expwy, Austin, TX,
78759-3504, USA.
© National Instruments 9
NI-9260 Getting Started
© 2022 National Instruments Corporation.
Indice
Altri manuali National Instruments Hardware per computer
National Instruments
National Instruments PC-DIO-24/PnP Manuale utente
National Instruments
National Instruments NI PXI-1042 Series Manuale utente
National Instruments
National Instruments NI PXIe-8105 Manuale utente
National Instruments
National Instruments NI 9401 Manuale utente
National Instruments
National Instruments PCI-DIO-96 Manuale utente
National Instruments
National Instruments CAN Series Manuale utente
National Instruments
National Instruments 9260 Manuale utente
National Instruments
National Instruments NI Real-Time Hypervisor Manuale utente
National Instruments
National Instruments Multifunction RIO NI R Series Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
National Instruments
National Instruments NI 9263 Manuale utente
National Instruments
National Instruments PXI-8110 Manuale utente
National Instruments
National Instruments PXI-8196 Manuale utente
National Instruments
National Instruments USB-6501 Manuale utente
National Instruments
National Instruments GPIB-1014 Series Manuale utente
National Instruments
National Instruments GPIB-120B Manuale utente
National Instruments
National Instruments DAQ PCI E Series Manuale utente
National Instruments
National Instruments NI-9252 Manuale
National Instruments
National Instruments R Series Manuale utente
National Instruments
National Instruments GPIB-ENET-1000 Manuale utente
