National Instruments PXIe-8100 Manuale utente
Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | sales@artisantg.com | www.artisantg.com
SM
View
Instra
INSTALLATION GUIDE
NI PXIe-8100
This document contains information about installing your NI PXIe-8100
controller in a PXI Express chassis. For complete configuration and
troubleshooting information (including information about BIOS setup,
adding RAM, and so on), see the NI PXIe-8100 User Manual. The manual
is in PDF format on the documentation CD included with your controller
and on the National Instruments Web site, ni.com/manuals.
Installing the NI PXIe-8100
This section contains general installation instructions for the
NI PXIe-8100. Consult your PXI Express chassis user manual for specific
instructions and warnings.
1. Plug in your chassis before installing the NI PXIe-8100. The power
cord grounds the chassis and protects it from electrical damage while
you install the module.
Caution To protect both yourself and the chassis from electrical hazards, leave the chassis
powered off until you finish installing the NI PXIe-8100 module.
2. Remove any filler panels blocking access to the system controller slot
(Slot 1) in the chassis.
3. Touch the metal part of the case to discharge any static electricity that
might be on your clothes or body.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
NI PXIe-8100 Installation Guide 2 ni.com
4. Remove the protective plastic covers from the four bracket-retaining
screws as shown in Figure 1.
Figure 1. Removing Protective Screw Caps
5. Make sure the injector/ejector handle is in its downward position.
Align the NI PXIe-8100 with the card guides on the top and bottom
of the system controller slot.
Caution Do not raise the injector/ejector handle as you insert the NI PXIe-8100. The
module will not insert properly unless the handle is in its downward position so that
it does not interfere with the injector rail on the chassis.
6. Hold the handle as you slowly slide the module into the chassis until
the handle catches on the injector/ejector rail.
7. Raise the injector/ejector handle until the module firmly seats
into the backplane receptacle connectors. The front panel of the
NI PXIe-8100 should be even with the front panel of the chassis.
8. Tighten the four bracket-retaining screws on the top and bottom of the
front panel to secure the NI PXIe-8100 to the chassis.
9. Check the installation.
1 Protective Screw Cap (4X)
1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
©National Instruments Corporation 3 NI PXIe-8100 Installation Guide
10. Connect the keyboard and mouse to the appropriate connectors. If you
are using a PS/2 keyboard and a PS/2 mouse, a Y-splitter adapter is
available to connect both to a single USB connector. National
Instruments offers a Y-splitter adapter cable, part number 778713-02,
available through the online catalog at ni.com/products.
11. Connect the VGA monitor video cable to the VGA connector.
12. Connect devices to ports as required by your system configuration.
13. Power on the chassis.
14. Verify that the controller boots. If the controller does not boot, refer
to the What if the NI PXIe-8100 Does Not Boot? section of this guide.
Figure 2 shows an NI PXIe-8100 installed in the system controller slot of a
National Instruments NI PXIe-1062Q chassis.
Figure 2. NI PXIe-8100 Controller Installed in a PXI Express Chassis
How to Remove the Controller from the PXI Express Chassis
The NI PXIe-8100 controller is designed for easy handling. To remove the
unit from the PXI Express chassis, complete the following steps.
1. Power off the chassis.
2. Unscrew the four bracket-retaining screws in the front panel.
3. Press the injector/ejector handle down.
4. Slide the unit out of the chassis.
1 NI PXIe-1062Q Chassis
2 NI PXIe-8100 Controller
3 Injector/Ejector Rail
3
2
1
NI PXIe-1062Q
COOLING CLEARANCE AND FAN FILTER MAINTENANCE REQUIRED. SEE MANUAL.
COOLING CLEARANCE ANDFAN FILTER MAINTENANCE REQUIRED.SEE MANUAL.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
LabVIEW, National Instruments, NI, ni.com, the National Instruments corporate logo, and the Eagle
logo are trademarks of National Instruments Corporation. Refer to the Trademark Information at
ni.com/trademarks for other National Instruments trademarks. Other product and company
names mentioned herein are trademarks or trade names of their respective companies. For patents
covering National Instruments products/technology, refer to the appropriate location: Help»Patents
in your software, the patents.txt file on your media, or the National Instruments Patent Notice
at ni.com/patents. Refer to the Export Compliance Information at ni.com/legal/
export-compliance for the National Instruments global trade compliance policy and how to
obtain relevant HTS codes, ECCNs, and other import/export data.
© 2011 National Instruments Corporation. All rights reserved. 373391A-01 Jun11
What if the NI PXIe-8100 Does Not Boot?
Several problems can cause a controller not to boot. Here are some things
to look for and possible solutions.
Things to Notice
• Which LEDs come on? The PWROK/FAULT LED should stay lit
green. The Drive LED should blink during boot as the disk is
accessed.
• What appears on the display? Does it hang at some particular point
(BIOS, Operating System, and so on)? If nothing appears on the
screen, try a different monitor. Does your monitor work with a
different PC? If it hangs, note the last screen output that you saw for
reference when consulting National Instruments technical support.
• What has changed about the system? Did you recently move the
system? Was there electrical storm activity? Did you recently add
a new module, memory chip, or piece of software?
• Refer to your chassis user manual for additional troubleshooting steps.
Things to Try
• Make sure the chassis is plugged in to a working power source.
• Check any fuses or circuit breakers in the chassis or other power
supply (possibly a UPS).
• Make sure the controller module is firmly seated in the chassis.
• Remove all other modules from the chassis.
• Remove any nonessential cables or devices.
• Try the controller in a different chassis.
• Try a similar controller in this same chassis.
• Clear the CMOS. (Refer to the System CMOS section of NI PXIe-8100
User Manual.)
• Make sure the RAM is properly seated.
For more troubleshooting information, refer to the NI PXIe-8100 User
Manual. The manual is in PDF format on the recovery CD included
with your controller and on the National Instruments Web site,
ni.com/manuals.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | sales@artisantg.com | www.artisantg.com
SM
View
Instra
Altri manuali per PXIe-8100
1
Indice
Altri manuali National Instruments Controllori
National Instruments
National Instruments NI PXI-8104 Manuale utente
National Instruments
National Instruments RMC-8354 Manuale utente
National Instruments
National Instruments NI PXIe-8135 Manuale utente
National Instruments
National Instruments PXI-8119 Manuale utente
National Instruments
National Instruments CMS-9068 Istruzioni di montaggio
National Instruments
National Instruments PXI NI PXI-8105 Manuale utente
National Instruments
National Instruments cRIO-9031 Manuale utente
National Instruments
National Instruments cFP-22 Series Manuale utente
National Instruments
National Instruments cRIO-904 Series Manuale utente
National Instruments
National Instruments SCXI NI 1357 Manuale utente
National Instruments
National Instruments CompactRIO cRIO-9002 Manuale utente
National Instruments
National Instruments GPIB-232CT-A IBCL EPROM Manuale utente
National Instruments
National Instruments NI SCXI 1357 Manuale utente
National Instruments
National Instruments GPIB-232CT-A IBCL EPROM Manuale utente
National Instruments
National Instruments CompactRIO cRIO-9072 Manuale utente
National Instruments
National Instruments 3100 Manuale utente
National Instruments
National Instruments NI cRIO-905x Series Manuale utente
National Instruments
National Instruments cRIO-9031 Manuale utente
National Instruments
National Instruments PXI-8231 Manuale utente
National Instruments
National Instruments NI-Motion Manuale utente
