National Instruments FD-11601 Manuale utente
FD-11601
Feature Usage
2022-07-11
FD-11601 User Guide
The FieldDAQ FD-11601 is an IP65/IP67-rated eight-channel simultaneous voltage
input device that can be connected to external powered and TEDS sensors. It can be
networked and synchronized with IEEE 802.1AS devices.
Figure 1. FD-11601 Front Panel
FD-11601
±10V Powered Sensor Input
STATUS
IN
10 A TOTAL
9-30 V
FieldDAQ
OUT
0
10/100/1000
LINK/ACT
SYNC
1
0 1
2 3
0 1
2 3
BANK 1
BANK 2
SP
AI+
AI–
GND/T–
T+
1
4
52
3
1
4
52
3
1
4
52
3
1
4
52
3
1
4
52
3
1
4
52
3
1
4
52
3
1
4
52
3
1
4
2
3
5
6
7
8
9
1
2
3
4
5
6
10
1. Power IN Connector
2. Power LED
3. Ethernet Port 0 and LED
4. Bank 1 Voltage Input Connectors 0 through 3 and LEDs
5. Bank 2 Voltage Input Connectors 0 through 3 and LEDs
6. Mounting Holes
7. Power OUT Connector
8. STATUS LED
9. Ethernet Port 1 and LED
10. SYNC Logo
© National Instruments 3
FD-11601 Feature Usage
FD-11601 Basic Information
Kit Contents
Items in your FieldDAQ kit:
■ FD-11601
■ FD-11601 Quick Start
■ FD-11601 Safety, Environmental, and Regulatory Information
■ 1 M12 female cap for power IN connector (connected to device)
■ 11 M12 male caps for power OUT, Ethernet, and input connectors
(connected to device)
Pinouts
Refer to the following topics for the connector pinouts on your FieldDAQ device:
■Voltage input connector pinout: Refer to Voltage Input Connectors.
■ Ethernet connector pinout: Refer to Ethernet Ports.
■ Power connector pinout: Refer to Power Connectors.
Driver Support
Earliest driver support version for your FieldDAQ device:
Driver Earliest Version Support
NI-DAQmx 18.5
Table 13. FD-11601 Driver Support
ni.com
4
FD-11601 Feature Usage
Cables and Accessories
The following table lists some cables and accessories available for your FieldDAQ
device. For a complete list of FieldDAQ accessories and ordering information, refer
to the pricing section of the FD-11601 product page at ni.com.
Cable/Accessory Part Number
IP67 Power Supply 147464-01
PS-16 Power Supply 781094-01
M125F-Pigtail Power Cable (1 m, 2 m, 3 m lengths) 786172-01/02/03
M125F-M125M Power Cable (0.3 m, 1 m, 3 m lengths) 786173-0R3/01/03
SHM128M-RJ45 Ethernet Cable (1 m, 2 m, 3 m, 10 m lengths) 785944-01/02/03/10
SHM128M-SH128M Ethernet Cable (0.3 m, 1 m, 3 m lengths) 785946-0R3/01/03
SHM125M-Pigtail I/O Cable (0.3 m, 1 m, 3 m lengths) 785950-0R3/01/03
SHM125M-Pigtail-RA I/O Cable (1 m, 3 m lengths) 785949-01/03
FD-11950, M125F Field-serviceable I/O Connector 785941-01
FD-11951, M125F-RA Field-serviceable I/O Connector 785942-01
M12 Torque Wrench, Ethernet and I/O 786181-01
M12 Torque Wrench, Power 786182-01
Universal M12 Male Cap, Plastic 786177-01
Universal M12 Male Cap, Metal 786178-01
Universal M12 Female Cap, Plastic 786180-01
Universal M12 Female Cap, Metal 786179-01
FD-11960, DIN Rail Mounting Kit 786443-01
Table 2. FD-11601 Cables and Accessories
Documentation
Documents that contain information about your FieldDAQ device:
■ FD-11601 Specifications
■ FD-11601 Quick Start
© National Instruments 5
FD-11601 Feature Usage
■ FD-11601 Safety, Environmental, and Regulatory Information
■ FD-11601 Calibration Procedure
Safety Guidelines
Caution Do not operate the FD-11601 in a manner not specified in this
user guide. Product misuse can result in a hazard. You can compromise the
safety protection built into the product if the product is damaged in any
way. If the product is damaged, return it to NI for repair.
The FD-11601 is rated for use in DRY or WET LOCATIONS. Hazardous voltages may
not be connected to the device. A hazardous voltage is a voltage greater than
42.4 V peak voltage or 60 V DC in DRY LOCATIONS, and 22.6 V peak or 35 V DC in WET
LOCATIONS.
Caution All wiring must be insulated for the highest voltage used.
EMC Guidelines
This product was tested and complies with the regulatory requirements and limits
for electromagnetic compatibility (EMC) stated in the product specifications. These
requirements and limits provide reasonable protection against harmful interference
when the product is operated in the intended operational electromagnetic
environment.
This product is intended for use in industrial locations. However, harmful
interference may occur in some installations, when the product is connected to
a peripheral device or test object, or if the product is used in residential areas. To
minimize interference with radio and television reception and prevent unacceptable
performance degradation, install and use this product in strict accordance with the
instructions in the product documentation.
Furthermore, any changes or modifications to the product not expressly approved
by NI could void your authority to operate it under your local regulatory rules.
ni.com
6
FD-11601 Feature Usage
Electromagnetic Compatibility Notices
Refer to the following notices for cables, accessories, and prevention measures
necessary to ensure the specified EMC performance.
Notice To ensure the specified EMC performance, operate this product
only with shielded cables and accessories.
Special Conditions for Marine Applications
Some products are approved for marine (shipboard) applications. To verify marine
approval certification for a product, visit ni.com/product-certifications, search by
model number, and click the appropriate link.
Notice In order to meet the EMC requirements for marine applications,
install the product in a shielded enclosure with shielded and/or filtered
power and input/output ports. In addition, take precautions when
designing, selecting, and installing measurement probes and cables to
ensure that the desired EMC performance is attained.
Unpacking
The FD-11601 ships in an antistatic package to prevent electrostatic discharge (ESD).
ESD can damage several components on the device.
Notice Never touch the exposed pins of connectors.
To avoid ESD damage in handling the device, take the following precautions:
■Ground yourself with a grounding strap or by touching a grounded object.
■Touch the antistatic package to a metal part of your computer chassis
before removing the device from the package.
© National Instruments 7
FD-11601 Feature Usage
Remove the device from the package and inspect it for loose components or any
other signs of damage. Notify NI if the device appears damaged in any way. Do not
install a damaged device.
Store the device in the antistatic package when the device is not in use.
Hardware Symbol Definitions
The following symbols are marked on your FieldDAQ device.
When this symbol is marked on a product, refer to Safety Guidelines for information about
precautions to take.
At the end of the product life cycle, all NI products must be disposed of according to local
laws and regulations. For more information about how to recycle NI products in your region,
visit ni.com/environment/weee.
540
e
NI 符合中国电子信息产品中限制使用某些有害物质指令(RoHS)。关于 NI 中国 RoHS 合规
性信息，请登录 ni.com/environment/rohs_china。(For information about China RoHS
compliance, go to ni.com/environment/rohs_china.)
What You Need to Get Started
You will need the following items to set up your FieldDAQ device.
ni.com
8
FD-11601 Feature Usage
Figure 1. FD-11601 Installation Supply List
NI-DAQmx
21
7
3 4
8
65
1. Host Computer running Windows or NI Linux RT
2. Application Soware
3. NI-DAQmx Driver
4. FD-11601
5. 5-pin L-coded M12 Power Input Cable
6. 8-pin X-coded M12 Ethernet Cable
7. External Power Supply
8. 5-pin A-coded M12 I/O Cables and Accessories
Note You can either use a shielded straight-through Ethernet cable or an
Ethernet crossover cable to connect the FieldDAQ device directly to your
computer.
Setting up the FieldDAQ Device
Complete the following steps.
1. Install the application soware (if applicable), as described in the
installation instructions that accompany your soware. Check your driver and
application development environment (ADE) readme files for specific version
compatibility.
2. Install NI-DAQmx from ni.com/downloads/drivers. Complete the instructions.
© National Instruments 9
FD-11601 Feature Usage
3. Register your NI hardware online at ni.com/register when prompted. The last
dialog box opens with the following options:
■ Restart Later to install more NI soware or documentation.
■ Shut Down or Restart if you are ready to install your device.
If you have problems installing your soware, go to ni.com/support/daqmx.
4. (Optional) Mount the FieldDAQ device to a panel or DIN rail, as described in
Mounting.
5. Make voltage input connections. Refer to Voltage Input Connectors and
Measurements for information about signal connections and guidelines.
6. Align and connect one end of the Ethernet cable to Ethernet port 0 on
the device, and the other end directly to your computer or any network
connection on the same subnet as your computer.
7. Power the device by aligning and connecting the power IN port on FieldDAQ
7.
to an external 9 V DC to 30 V DC power source with the 5-pinL-coded M12
power cable. For information about wiring your external power source to
the power connector, refer to Wiring External Power to the FieldDAQ Device.
The FieldDAQ device requires an external power supply that meets the
specifications listed in the FD-11601 Specifications .
The Power LED turns on. Refer to Power LED for information about Power LED
status.
8. To add the FieldDAQ to your soware configuration, open NI MAX on your8.
Windows host computer. Expand Devices and Interfaces » Network Devices.
■If the device is on your local subnet, the device automatically appears in
the list of available devices. Right-click the FieldDAQ device and select Add
Device.
■If the device is not on your local subnet, right-click Network Devices and
select Find Network NI-DAQmx Devices.
1. In the Find Network NI-DAQmx Devices dialog box that opens, do one
of the following:
ni.com
10
FD-11601 Feature Usage
Altri manuali per FD-11601
2
Altri manuali National Instruments Generatore portatile
National Instruments
National Instruments DAQArb 5411 Manuale utente
National Instruments
National Instruments PXIe-5413 Manuale utente
National Instruments
National Instruments NI 5412 Manuale utente
National Instruments
National Instruments NI 5422 Manuale utente
National Instruments
National Instruments PXIe-5654 Manuale utente
National Instruments
National Instruments NI 5741 Manuale utente
National Instruments
National Instruments NI 5421 Manuale
National Instruments
National Instruments PXI-5421 Manuale utente
National Instruments
National Instruments PXIe-5654 Manuale
National Instruments
National Instruments PXI-5650 Manuale
National Instruments
National Instruments PXIe-5745 Manuale utente
National Instruments
National Instruments NI PXIe-5673E Manuale
National Instruments
National Instruments NI 5402 Manuale
National Instruments
National Instruments PXIe-5673 Manuale
National Instruments
National Instruments NI 5402 Manuale utente
National Instruments
National Instruments NI 5401 Manuale utente
National Instruments
National Instruments NI 5401 Manuale utente
National Instruments
National Instruments NI PXIe-5450 Manuale utente
National Instruments
National Instruments 5412 Manuale
National Instruments
National Instruments PXIe-5423 Manuale
