Nautel VS300 Manuale utente
VS300 Transmitter
Installation Manual
Document:NHB-VS300-INS
Issue: 6.0 2014-11-01
Status: Standard
Nautel Limited
10089 Peggy’s Cove Road
Hackett’s Cove, NS Canada B3Z 3J4
Phone: +1.902.823.3900 or
Toll Free: +1.877.6NAUTEL (6628835) (Canada & USA only)
Fax: +1.902.823.3183
Nautel Inc.
201 Target Industrial Circle
Bangor, Maine USA 04401
Phone: +1.207.947.8200
Fax: +1.207.947.3693
Customer Service (24 hour support)
+1.877.628.8353 (Canada & USA only)
+1.902.823.5100 (International)
Email: [email protected]
Web: www.nautel.com
The comparisons and other information provided in this document
have been prepared in good faith based on publicly available
information. The reader is encouraged to consult the respective
manufacturer's most recent published data for verification.
© Copyright 2014 NAUTEL. All rights reserved.
VS300 Installation Manual Table of contents
Page v
Contents
Release control record vii
Preparing for installation 1-1
Mounting the transmitter 2-1
Connecting to station reference ground 3-1
Installing the RF feed line 4-1
Connecting ac power 5-1
Installing program inputs 6-1
Planning 6-1
Connecting cables 6-1
Installing control and monitoring wiring 7-1
Planning 7-1
Connecting cables 7-1
Commissioning tasks 8-1
Pre-commissioning tasks 8-1
Commissioning 8-2
Going on-air 8-5
Network setup 8-5
Parts and tools 9-1
Contacting Nautel 9-1
VS300 Installation Manual Table of contents
Page vi Issue 6.0 2014-11-01
Parts supplied by Nautel 9-2
Parts not supplied by Nautel 9-2
Parts ordering 9-2
Module replacement program 9-3
Tools for installation 9-3
Pre-installation / Installation assistance 10-1
Pre-installation consulting 10-1
Installation and commissioning service 10-1
Online documentation 10-3
On-site support 10-3
Training 10-3
Standard warranty 10-4
Extended warranties 10-8
List of terms 11-1
VS300 Installation Manual
Issue 6.0 2014-11-01 Page vii
Release control record
Issue Date Reason
6.0 2014-11-01 Hardware Release 6 (NARF64E and NARF64E/01).
Supports software version VS SW 4.1
VS300 Installation Manual
Page viii Issue 6.0 2014-11-01
VS300 Installation Manual Preparing for installation
Issue 6.0 2014-11-01 Page 1-1
Section 1: Preparing for installation
Before installing your VS300 transmitter, perform the following steps:
1. Ensure that you have performed the pre-installation tasks described in the
VS300 Pre-installation Manual.
2. Inspect the shipping box for damage. Report any damage immediately to your Nautel sales
representative and the carrier.
3. Unpack the box. Remove all items from packing and place them on a suitable work area.
Check your packing list to make sure that you received all the components, including the
VS300, VS300 Manual CD or USB, installation kit and ancillary kit.
4. Assemble your parts and tools. For a list of required tools, see “Parts and tools” on page 9-1.
5. When you are ready to install the VS300 transmitter, follow the steps shown in Figure 1.1 on
page 1-2.
TIP When you have completed a task or step, put a check mark beside the step
number.
CAUTION:
FAILURE TO COMPLY WITH RECOMMENDATIONS MAY VOID YOUR MANUFACTURER’S
WARRANTY. FOR MORE INFORMATION, REVIEW YOUR WARRANTY DOCUMENTS.
VS300 Installation Manual Preparing for installation
Page 1-2 Issue 6.0 2014-11-01
Figure 1.1: Flowchart - Installing the transmitter
Mounting the transmitter - see page 2-1
Connecting to station reference ground - see page 3-1
Installing control and monitoring wiring - see page 7-1
Commissioning tasks - see page 8-1
Perform operational tasks:
“Commissioning” and “Going on-air”, beginning on page 8-2
Installing the RF feed line - see page 4-1
Installing program inputs - see page 6-1
Connecting ac power - see page 5-1
Altri manuali per VS300
5
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Nautel Trasmettitore
Nautel
Nautel NX100 Manuale utente
Nautel
Nautel XR6 Manuale utente
Nautel
Nautel VS1 Manuale utente
Nautel
Nautel VS2.5 Manuale utente
Nautel
Nautel Vector-LP VR125 Manuale del proprietario
Nautel
Nautel NX Series Guida all'installazione
Nautel
Nautel GV5 Manuale
Nautel
Nautel GV40 Manuale di programmazione
Nautel
Nautel NX5 Manuale
Nautel
Nautel XR3 Manuale utente
Nautel
Nautel XR12 Manuale utente
Nautel
Nautel ND2000A-02x-xx0 Series Manuale del proprietario
Nautel
Nautel GV40 Manuale utente
Nautel
Nautel NV30LT-N Manuale
Nautel
Nautel J1000 Istruzioni operative
Nautel
Nautel NX15 Manuale di programmazione
Nautel
Nautel J1000 Manuale utente
Nautel
Nautel NX5 AM Manuale
Nautel
Nautel NV30 Manuale utente
Nautel
Nautel NX5 AM Manuale utente
