Nauticam NA-XT3 Manuale utente
1
2
FORWARD
Thank you for your purchase of a NAUTICAM housing.
At NAUTICAM, we pride ourselves in the ability to recognize the requirements of professional
as well as amateur underwater photographers and fulfill them through the innovative designs
of our products. We strive to achieve a high level of user-friendliness by allowing stress-free
installation and easy operation of all important functions of the camera.
Each housing is individually inspected and water pressure tested to ensure optimum quality.
Please read this manual carefully before using the housing, this will maximize its performance
as well as its lifetime.
The illustrations in this manual may differ from the actual product.
3
WARRANTY
Warranty …………………………………………………………………………………………………………….
4
Precautions …………………………………………………………………………………………………………
5
Package Contents ……………………………………………………………………………………………….
7
Specifications ……………………………………………………………………………………………………..
8
Identification of Parts …………………………………………………………………………………………
9
Opening and Locking the Housing ………………………………………………………………………
14
Preparation of the Housing …………………………………………………………………………………
16
Installing the Camera ………………………………………………………………………………………….
21
Mounting the Port ………………………………………………………………………………………………
25
Changing the Viewfinder …………………………………………………………………………………….
28
Care and Maintenance ……………………………………………………………………………………….
30
Optional Accessories …………………………………………………………………………………………..
31
N100 Port system for Fujifilm XH1/XT3 System ………………………………………………....
33
Nauticam Water Optics …………………………………………….....……………………………………
34
4
WARRANTY
All NAUTICAM Products are warranted against any material and manufacturing defects for two years from
the date of purchase for consumer use. The warranty period is defined by the invoicing or payment date by
the customer. Alternatively, the warranty period would be assumed from the day that the product is
shipped from our facility. This warranty only applies to products purchased from authorized NAUTICAM
dealers and does not extend beyond the original retail purchaser.
To return your product for service, please contact your regional authorized service center(s). Please note
that this warranty only applies when the product is purchased in the territory where the service center is
located.
NAUTICAM accepts no liability for any damage to and defects in the housing caused by improper use and/or
poor maintenance; it is the responsibility of the owner to carefully follow the instructions in our manuals.
NAUTICAM does not hold responsibility for damage, of any nature, to any equipment used with and/or
placed within our products.
NAUTICAM accepts no liability for any loss of captured images or the inability to capture images even if it is
due to the malfunctioning of our products.
Unauthorized modifications and/or repairs of our products will automatically invalidate the warranty.
5
PRECAUTIONS
A water-tight test without the camera inside the housing is highly recommended when
using the system for the first time and after the changing of port and O-ring(s).
Do not use lubricants from other brands with the silicone rubber O-ring on this housing,
only use the lubricant provided by NAUTICAM.
Discontinue use immediately should you notice any leakage.
Store the housing in a robust, shock-proof container during transportation; avoid
transporting with any equipment, such as a camera, inside the housing.
When travelling by air, do not close the housing as this may lead to a pressure difference
between the atmosphere and inside the housing.
Care must be taken when opening the housing, as pressure may build up inside the
housing which increases the opening force.
6
Do not open the product in a wet or sandy environment. Protect the interior from
moisture and debris in order to prevent malfunction or leakage.
Do not store the product in an environment of high humidity.
Do not leave the housing and the monitor in direct sunlight for prolonged periods.
Keep out of reach of children, failure to do so could result in injury.
Defective products should be shipped to our distributors for service, unauthorized
disassembling and/or modifications could result in malfunction or leakage.
Use only recommended battery with this product, do not mix different specifications or
old and new batteries.
7
NA-XT3 housing
Spare silicone rubber O-ring for housing
O-ring remover
CR2032 battery
Lubricant
Set of Allen keys
Manual instruction card
PACKAGE CONTENTS
8
SPECIFICATIONS
*includes camera, Carl Zeiss Touit 2.8/50M, N100 Extension Ring 30 and Flat Port 32
Construction
Housing body:
Aluminum alloy
Surface treatment:
Hard anodized
Display window:
Abrasion resistant polycarbonate
Dimensions
Width:
350mm
Height:
210mm
Depth:
120mm
Weight
Approx. 2.65kg (Air)
Buoyancy
Slightly negative (200g*)
Depth rating
100 m
Port mount
N100
Compatible
cameras
Fujifilm X-T3 Camera
9
IDENTIFICATION OF PARTS
Port alignment index
Ball mount x2
Optical fibre mount
Focus mode selector
Lens release button
Port lock safety button
Port lock lever
10
*Handles are not displayed
Sensitivity dial
M14 accessory port
Drive mode selector
Dial lock release button
Accessory coldshoe
Zoom/focus knob
M24 accessory port
Playback lever
M5/M10 thread hole
Indice
Altri manuali Nauticam Accessori per fotocamere
Nauticam
Nauticam NA-E2F Manuale utente
Nauticam
Nauticam NA-RX100III Manuale utente
Nauticam
Nauticam 22110 N120 Extension Ring 10 II Manuale utente
Nauticam
Nauticam M67 Manuale utente
Nauticam
Nauticam 19561 Manuale utente
Nauticam
Nauticam CR1530-Z Manuale utente
Nauticam
Nauticam NA-GX9 Manuale utente
Nauticam
Nauticam 83225 Manuale utente
Nauticam
Nauticam NA-1DXIII Manuale utente
Nauticam
Nauticam 83213 Manuale utente
Nauticam
Nauticam NA-LX10 Manuale utente
Nauticam
Nauticam 18809 Manuale utente
Nauticam
Nauticam N120 Manuale utente
Nauticam
Nauticam NA-502 Manuale utente
Nauticam
Nauticam NA - Z7II Manuale utente
Nauticam
Nauticam 36207 Manuale utente
Nauticam
Nauticam NA-G7XII Manuale utente
Nauticam
Nauticam NA-A7 Manuale utente
Nauticam
Nauticam 26306 Manuale utente
Nauticam
Nauticam NA-RX100 Manuale utente
