NCR 7460 Manuale utente
NCR 7460 Retail Terminal
Release 1.2
Hardware User’s Guide
B005-0000-1280
Issue D
The products described in this book are licensed products of NCR Corporation.
NCR is a registered trademark of NCR Corporation.
Pentium is a registered trademark of Intel Corporation.
It is the policy of NCR Corporation (NCR) to improve products as new technology, components, software,
and firmware become available. NCR, therefore, reserves the right to change specifications without prior
notice.
All features, functions, and operations described herein may not be marketed by NCR in all parts of the
world. In some instances, photographs are of equipment prototypes. Therefore, before using this document,
consult with your NCR representative or NCR office for information that is applicable and current.
To maintain the quality of our publications, we need your comments on the accuracy, clarity, organization,
and value of this book.
Address correspondence to:
Manager, Information Products
NCR Corporation
2651 Satellite Blvd.
Duluth, GA 30096
Copyright © 2002
By NCR Corporation
Dayton, Ohio U.S.A.
All Rights Reserved
i
Preface
Audience
This book is written for hardware installer/service personnel, system
integrators, and field engineers.
Safety Warnings
Warning: No user serviceable parts. Servicing should only be
performed by a qualified service technician.
Caution: For continued protection against risk of fire, replace only
with the same type and ratings of fuse.
Attention: Pour prévenir et vous protéger contre un risque de feu,
remplacer la fusible avec une autre fusible de même type, seulement.
Power Supply Cord Used as Disconnect Means
Caution: The power supply cord is used as the main disconnect
device. Ensure that the socket outlet is located/installed near the
equipment and is easily accessible.
Attention: Le cordon d'alimentation est utilisé comme interrupteur
général. La prise de courant doit être située ou installée å proximité du
matériel et être facile d'accés.
Warning: DO NOT connect or disconnect a printer, keyboard, or
any other terminal-powered peripheral while the terminal is
powered on. Doing so may result in peripheral or system damage.
Fuse Replacement
Caution: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type as recommended by the
manufacturer. Discard used batteries according to the manufacturer’s
instructions. Switzerland (only) refer to Anex 4.10 of SR 814.013.
Attention: Il y a danger d'explosion s'il y a remplacement incorrect de
la batterie. Remplacer uniquement avec une batterie du même type ou
d'un type recommandé par le constructeur. Mettre au rébut les
batteries usagées conformément aux instructions du fabricant.
ii
Recycling
Contact local NCR representative for information regarding proper
disposal and recycling of equipment.
Attention: Pour prévenir et vous protéger contre un risque de feu,
remplacer la fusible avec une autre fusible de même type, seulement.
Peripheral Usage
This terminal should only be used with peripheral devices that are
certified by the appropriate safety agency for the country of installation
(UL, CSA, TUV, VDE) or those which are recommended by NCR
Corporation.
Environmental Consciousness
NCR is demonstrating its concern for the environment by designing an
intelligent power management system into this terminal that operates
efficiently whether the system is in a stand-alone or network
environment.
References
•NCR 7460 Retail Terminal Site Preparation Guide
(B005-0000-1281)
•NCR FitClient Software User’s Guide
(B005-0000-1235)
•NCR 7460 Retail Terminal Parts Identification Manual
(B005-0000-1282)
•NCR 7460 Retail Terminal Service Guide
(B005-0000-1338)
iii
Table of Contents
Chapter 1: Product Overview
Introduction......................................................................1-1
Serial Number Labels......................................................1-2
Hardware Modules .........................................................1-3
Base Unit ....................................................................1-3
Hardware Options ....................................................1-4
Terminal Components not Supported...............1-5
System Configuration Diagram.....................................1-6
Hardware Module Descriptions....................................1-7
Processor Board.........................................................1-7
Processor/Chip Set...............................................1-7
Video Subsystem ..................................................1-7
Ethernet 10/100Base-T LAN
Communications...................................................1-8
Universal Serial Bus .............................................1-9
Serial Ports.............................................................1-9
Hardware Monitor .............................................1-10
Mini PCI Expansion Header .............................1-10
IDE Header..........................................................1-10
Touch Screen Controller ....................................1-10
Processor Board Connectors .............................1-11
Flash Disk ............................................................1-11
NCR Retail Specific Hardware .........................1-12
Board BIOS ..........................................................1-14
Operator Display.....................................................1-16
LCD Adapter Board ...........................................1-16
LCD Backlight Inverter Module .......................1-16
iv
Touch Screen .......................................................1-16
NCR 7460 Integrated Customer Display .............1-17
Features...........................................................................1-18
Magnetic Stripe Reader..........................................1-18
Printer Options........................................................1-19
NCR 7194 Printer................................................1-19
7158 Printer..........................................................1-19
7194 Printer..........................................................1-20
7196 Printer..........................................................1-20
NCR 5972 2x20 Customer Display .......................1-21
Features................................................................1-22
NCR 5973 International VFD Customer Display1-23
Other Integrated Devices and Indicators ............1-24
Hard Disk Drive..................................................1-24
Power/Status LED .............................................1-24
LAN Status LEDs................................................1-25
Power Supply......................................................1-25
Chapter 2: Hardware Installation
Introduction......................................................................2-1
Installation Summary ...............................................2-1
Installation Restrictions ..................................................2-2
Connecting the Cables ....................................................2-3
Accessing the Cable Connectors and Routing
Cables..........................................................................2-3
Identifying the Cable Connectors...........................2-4
Installing Peripherals ......................................................2-5
Installing a Transaction Printer...............................2-5
7158 Printer............................................................2-5
7194 Printer............................................................2-6
Serial Modem for 7194 Printers...............................2-7
v
Installation Procedures ........................................2-7
7196 Printer............................................................2-8
Installing a Remote Customer Display ................2-10
NCR 5972-1000/1100 Remote Customer
Display .................................................................2-10
5973 International VFD Customer Display.....2-12
Mounting Considerations ............................................2-14
Wall Mounting the 7460 ...............................................2-15
Wall Mounting the Base Unit................................2-16
Wall Mounting the LCD Operators Display.......2-17
Installing a Cash Drawer .......................................2-19
Installing a Second Cash Drawer .....................2-20
Mini PCI 56KB Modem (7460-F210)...........................2-21
Installing the Modem .............................................2-21
Finalizing the Installation.............................................2-22
Completing the OS Installation (WinNT) .......2-22
Completing the OS Installation (Win98) .........2-23
Completing the OS Installation (Win95) .........2-24
Completing the OS Installation (DOS) ............2-24
Installing a Serial Mouse ..............................................2-25
Guidelines for Calibrating the Touch Screen ............2-26
Calibration Procedure ............................................2-26
Summary..................................................................2-28
Out-of-Box Failures .......................................................2-28
Powering Down the Terminal .....................................2-28
Chapter 3: BIOS Setup
Introduction......................................................................3-1
Entering Setup Using a Keyboard ..........................3-1
How to Select Menu Options ..................................3-1
Restoring Factory Settings .......................................3-2
vi
Setup Menus.....................................................................3-3
Main Menu.................................................................3-3
System Time and Date .........................................3-3
Legacy Diskette.....................................................3-3
Primary Master .....................................................3-4
Advanced Menu........................................................3-5
Installed OS ...........................................................3-6
Reset Configuration Data ....................................3-6
Cache Memory......................................................3-7
PS/2 port..............................................................3-11
Large Disk Access Mode ...................................3-23
Local Bus IDE adapter .......................................3-24
Advanced Chipset Control................................3-24
PCI Configuration ..............................................3-25
System Monitors .................................................3-28
Multiple ROM Menu..........................................3-29
QuickBoot Mode.................................................3-31
After Power Failure............................................3-31
Continuous POST ...............................................3-32
Boot menu retry ..................................................3-32
LCD contrast and LCD Brightness
(Advanced Menu)...............................................3-32
Beep Error Codes (Advanced Menu)...............3-32
Security Menu Options ..........................................3-33
Set Supervisor/User Password ........................3-33
Password on Boot ...............................................3-34
Power Menu Options .............................................3-35
Power Savings.......................................................3-35
Resume On Time ................................................3-37
Resume Time.......................................................3-38
Resume On Modem Ring ..................................3-38
vii
Boot Menu Options.................................................3-39
System Boot Sequence........................................3-39
Exit Menu Options..................................................3-40
BIOS Default CMOS Values ..................................3-41
Main Values.........................................................3-41
Advanced ValuesI/O Device Configuration..3-43
PCI Configuration ..............................................3-43
I/O Addresses ...............................................................3-44
Interrupt Levels .............................................................3-46
Memory Map..................................................................3-47
Chapter 4: Operating System Recovery
Introduction......................................................................4-1
Prerequisites ..............................................................4-1
Updating Procedures................................................4-2
Completing the OS Installation (Win2000) .......4-5
Completing the OS Installation (WinNT) .........4-6
Completing the OS Installation (Win98) ...........4-6
Completing the OS Installation (Win95) ...........4-7
Completing the OS Installation (DOS) ..............4-7
Gold Disk Contents.........................................................4-8
Microsoft Operating System License
Agreements................................................................4-8
NCR 7460 Win 2000 Operating System
Recovery Software (LPIN: D370-0505-0100) .........4-9
NCR 7460-NT Operating System Recovery
Software (LPIN: D370-0496-0100).........................4-10
NCR 7460-Win98 Operating System Recovery
Software (LPIN: D370-0497-0100).........................4-11
NCR 7460-Win95 Operating System Recovery
Software (LPIN: D370-0498-0100).........................4-12
viii
NCR 7460 DOS Operating System Recovery
Software (LPIN: D370-0499-0100).........................4-12
OS Recovery from a Larger Disk Image.....................4-13
Chapter 5: BIOS Updating Procedures
Introduction......................................................................5-1
Prerequisites ..............................................................5-1
Updating Procedures................................................5-2
BIOS Crisis Recovery ......................................................5-3
Recovery Procedures ................................................5-5
Cable/Connector Pin-Out Information........................5-7
Chapter 6: NCR 7460 2x20 Customer Display
Introduction......................................................................6-1
Viewing Area.............................................................6-1
Diagnostics.................................................................6-1
Command Descriptions..................................................6-2
Structure/Logic Description ...................................6-2
Integrated Display Interface....................................6-2
Character Map...........................................................6-4
Appendix A: Cables
Appendix B: Kits
Altri manuali per 7460
3
Indice
Altri manuali NCR Terminale touch
NCR
NCR 5964 Manuale utente
NCR
NCR Verifone UX100 Manuale
NCR
NCR RealPOS 40 Manuale utente
NCR
NCR RealPOS 5953 Manuale utente
NCR
NCR P1235 Manuale utente
NCR
NCR RealPOS 70XRT Manuale
NCR
NCR EasyPoint 7401 Manuale di installazione
NCR
NCR RealPOS 60 Manuale utente
NCR
NCR OPTIC 5 Manuale utente
NCR
NCR OPTIC 5 Manuale utente
NCR
NCR RealPOS XR6 Manuale utente
NCR
NCR RealPOS 5953 Manuale utente
NCR
NCR RealPOS 70 Manuale utente
NCR
NCR OPTIC 5 Manuale utente
NCR
NCR 7460 Manuale utente
NCR
NCR RealPOS 7458 Manuale di servizio
NCR
NCR RealPOS 40 Manuale utente
NCR
NCR 7460 Istruzioni per l’uso
NCR
NCR RealPOS 72XRT POS Manuale utente
NCR
NCR 7446 Manuale utente
