NEC SuperScript 610 Manuale utente
Silentwriter
SuperScript 610
User's Guide
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER
The information disclosed in this document, including all designs and related materi-
als,isthevaluablepropertyofNECCorporation(NEC)and/oritslicensers. NECand/
oritslicensers,asappropriate,reserveallpatent,copyrightandotherproprietaryrights
to this document, including all design, manufacturing, reproduction, use, and sales
rights thereto, except to the extent said rights are expressly granted to others.
The NEC product(s) discussed in this document are warranted in accordance with the
terms of the applicable NEC product specification. However, actual performance of
each such product is dependent upon factors such as system configuration, customer
data, and operator control. Since implementation by customers of each product may
vary, the suitability of specific product configurations and applications must be
determined by the customer and is not warranted by NEC.
Toallowfordesignandspecificationimprovements,theinformationinthisdocument
is subject to change at any time, without notice. Reproduction of this document or
portions thereof without prior written approval of NEC is prohibited.
Silentwriter is a U.S. registered trademark of NEC Corporation. All other product, brand, or trade
names used in this publication are the trademarks or registered trademarks of their respective owners.
© Copyright, WinRefs 1993, Destiny Technology Corp. Ver. 1.0
© Copyright, 1992, Microsoft Corporation
First Printing — Oct. 1993
Revised — April 1994
Copyright 1993
NEC Corporation
7-1 Shiba 5-Chome, Minato-ku
Tokyo 108-01, Japan
All Rights Reserved
Contents iii
Contents
Using This Guide ............................................................... ix
1. Introduction How the Printing Process Works.............. 1-2
Standard Features ..................................... 1-3
Optional Features...................................... 1-6
Ordering Supplies and Accessories .......... 1-7
2. Setting Up Unpacking................................................. 2-1
Unpacking ............................................. 2-1
Locating the Printer Items..................... 2-2
Operating Requirements........................... 2-3
Printer Dimensions................................ 2-5
Printer Dimensions
with 200-sheet Hopper........................ 2-6
System Requirements ............................... 2-7
External Printer Parts................................ 2-8
Internal Printer Parts............................... 2-11
Toner Cartridge ...................................... 2-13
Preparing the Toner Cartridge ............ 2-14
Installing the Toner Cartridge............. 2-17
Installing Paper....................................... 2-20
Interface Cable........................................ 2-23
Power Cord............................................. 2-25
Installing SuperScript Printing Software 2-27
3. Printing with Your Silentwriter SuperScript 610
Silentwriter SuperScript Print Modes....... 3-1
GDI Mode................................................. 3-2
GDI Setup Screen ................................. 3-2
GDI Option Screen ............................... 3-5
Printing Status Option........................... 3-6
iv Contents
Manual Duplex Printing........................ 3-6
PCL Print Mode...................................... 3-11
Saving Downloaded Fonts and Macros3-12
Page Ejects - Form Feeds
(PCL Mode).................................... 3-13
Printing from a Windows Application ... 3-14
Printing from DOS Application.............. 3-14
Printing PCL Files from
DOS Command Line........................... 3-14
4. NEC SuperScript Print Manager
5. Print Status Window
6. Selecting Paper and Media
Paper Properties........................................ 6-2
Print Areas ............................................ 6-3
Paper and Media Use ............................ 6-4
Preprinted Forms................................... 6-5
Heavy Print Stock ................................. 6-6
Envelopes.............................................. 6-6
Adhesive Labels.................................... 6-8
Transparency Film ................................ 6-9
Media Purchasing Specifications ............. 6-9
Sheet Paper.......................................... 6-10
Envelopes............................................ 6-12
Adhesive Labels.................................. 6-13
Transparency Film .............................. 6-14
Storage Guidelines.................................. 6-14
7. Using Fonts Fonts in GDI Mode................................... 7-1
Fonts in PCL Mode .................................. 7-3
8. Choosing Print Options
How to Print Using Various Media .......... 8-2
The Standard Hopper................................ 8-4
Contents v
Multi-sheet Feed and Single-sheet Feed8-4
Loading the Paper ................................. 8-4
The 200-sheet Paper Hopper (Optional)... 8-7
Removing the Standard Hopper............ 8-8
Installing the 200-sheet Paper Hopper.. 8-9
Hopper Feed........................................ 8-10
Manual Feed........................................ 8-13
Removing the 200-sheet Hopper ........ 8-15
Output Paths ........................................... 8-16
Face-up Tray ....................................... 8-17
Face-down Door.................................. 8-17
9. Maintaining Your Printer
Redistributing the Toner........................... 9-2
Cleaning the Printer.................................. 9-7
Replacing the Toner Cartridge ................. 9-8
Cleaning the Printer Mechanism........... 9-8
Cleaning Conditions .......................... 9-9
Parts to Be Cleaned ......................... 9-10
Cleaning Procedure ......................... 9-12
Installing the Toner Cartridge............. 9-16
Transporting the Printer.......................... 9-22
Removing the Toner Cartridge ........... 9-22
Removing the 200-sheet Hopper ........ 9-24
Removing the Interface Cable ............ 9-24
Removing the Power Cord.................. 9-25
Check List Before
Transporting the Printer........................ 9-26
10.Troubleshooting
Print Quality Maintenance...................... 10-2
Paper Jam................................................ 10-2
Locations of Potential Paper Jams ...... 10-3
Removing Jammed Paper ................... 10-3
Paper Jams in the Hopper................ 10-4
Paper Jams in the Fuser Unit........... 10-5
Points to Check to Avoid
Paper Jams ........................................ 10-7
Testing the Printer .................................. 10-8
vi Contents
Status Messages.................................... 10-10
Installation Problems ........................ 10-10
Operating Problems .......................... 10-14
Output Quality ...................................... 10-26
Light Page ......................................... 10-26
Blank Page ........................................ 10-27
Black Page ........................................ 10-28
Streaked Page.................................... 10-29
Spots on Back of Paper..................... 10-30
Blank Spots ....................................... 10-31
Solid White Vertical Line ................. 10-32
Graphics Appear Coarse
in GDI Mode................................... 10-33
Text Appears Jagged or Low
Resolution in GDI Mode................. 10-33
Unexpected Font in Either GDI or
PCL Mode ....................................... 10-34
Unexpected Font in PCL Mode ........ 10-35
Shifted or Broken Image................... 10-35
Allocating Virtual Memory .................. 10-36
Commonly Asked Questions................ 10-38
A Character Sets
B Optimizing Printer Performance
C Specifications
D Interface Cable Specifications
E Removing SuperScript Files from Your System
Glossary
Index
Contents vii
List of Tables
1-1 Supplies and Accessories ............... 1-7
6-1 Paper Specifications ..................... 6-10
6-2 Envelope Specifications ............... 6-12
6-3 Label Specifications ..................... 6-13
6-4 Transparency Specifications ........ 6-14
8-1-a Recommended Printing Methods
[The Standard Hopper]................... 8-2
8-1-b Recommended Printing Methods
[Optional 200-sheet Hopper].......... 8-3
10-1 Simple Troubleshooting ............... 10-1
viii Contents
Contents ix
Using this Guide
This guide provides an introduction to the NEC
Silentwriter SuperScript 610 printer and includes
information about its setting up, features, operation,
and maintenance.
If you are just beginning to use it, you may want to
read this entire user’s guide to familiarize yourself
with the printer. If you have been using the printer
for some time, you can scan the Contents for spe-
cific information that you need.
x Contents
Altri manuali per SuperScript 610
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali NEC Stampante
NEC
NEC Pinwriter P2000/P2X Manuale utente
NEC
NEC Spinwriter 5500 Manuale utente
NEC
NEC Pinwriter P2 Manuale utente
NEC
NEC Silentwriter 97 Manuale tecnico
NEC
NEC Pinwriter P5300 Manuale utente
NEC
NEC PC-8000 Series Manuale utente
NEC
NEC SuperScript 4600N Manuale utente
NEC
NEC MultiSync 95 Manuale tecnico
NEC
NEC Silentwriter 1765 Manuale utente
NEC
NEC Pinwriter P6 Manuale utente
NEC
NEC Pinwriter P6200 Manuale utente
NEC
NEC 870 - SuperScript B/W Laser Printer Istruzioni per l'installazione
NEC
NEC SuperScript 1400 Manuale utente
NEC
NEC Pinwriter P9300 Manuale utente
NEC
NEC 1760 - SilentWriter B/W Laser Printer Manuale utente
NEC
NEC SuperScript 4400 Manuale utente
NEC
NEC Pinwriter P5 Manuale utente
NEC
NEC 870 - SuperScript B/W Laser Printer Manuale tecnico
NEC
NEC SuperScript 1800 Manuale utente
NEC
NEC Jetmate 1000 Manuale tecnico
