NEC USB Manuale utente
MultiSync®
IntelliBase™
USB Hub
and Audio
User’s Manual
MultiSync®
IntelliBase™
USB Hub
and Audio
User’s Manual
203 Eng Fr Cndn manual 12/21/98 11:19 AM Page 1
Index
Contents 1
Quick Start 2-20
IntelliBase™Control Panel 21
Controls 22-23
Specifications 24
Troubleshooting 25
References 26
Limited Warranty 27
Table des matières
Contenu 31
Démarrage rapide 32-50
Tableau de commande IntelliBasemc 51
Commandes 52
Caractéristiques 54
Dépannage 55
Références 56
Garantie limitée 57
203 Eng Fr Cndn manual 12/21/98 11:19 AM Page 2
Safety Precautions and Maintenance
FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN
SETTING UP AND USING THE MULTISYNC®INTELLIBASE™WITH USB AUDIO:
Read Instructions — All the safety and operating instructions should be read before the appliance is operated.
Retain Instructions — The operating instructions should be retained for future reference.
Heed Warning — All warnings on the appliance and in the operating instructions should be adhered to.
Follow Instructions — All operating and use instructions should be followed.
Water and Moisture — The appliance should not be used near water – for example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming pool, etc.
Outdoor Use — Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
Location — The appliance should be installed in a stable location. Do not use the monitor while the base is removed.
Ventilation — The appliance should be situated so that its location or position does not interfere with its proper ventilation.
For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation
openings; or placed in a built-in installation, such as a closed bookcase or cabinet that may impede the flow of air through
the ventilation openings.
Heat — The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.
Power Sources —
Use the supplied AC adapter. The appliance should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
Power-Cord Protection — Power-supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where
they exit from the appliance.
Image and Sound — Adjust the sound output for optimal image and speaker clarity.
Grounding or Polarization — Precautions should be taken so that the grounding or polarization means of an appliance
is not defeated.
Cleaning — The appliance should be cleaned only with a polishing cloth or a soft dry cloth. Never clean with furniture wax,
benzine, insecticides or other volatile liquids since they may corrode the cabinet.
Non-Use Periods — The power cord of the appliance should be unplugged from the outlet when left unused for a long
period of time.
Object and Liquid Entry— Care should be taken so that objects do not fall and liquids are not spilled into the enclosure
through openings.
Damage Requiring Service — The appliance should be serviced by qualified service personnel when:
• The power-supply cord or the plug has been damaged.
• Objects have fallen, or liquid has been spilled into the appliance.
• The appliance has been exposed to rain.
• The appliance does not appear to operate normally or exhibits a marked change in performance.
• The appliance has been dropped or the enclosure damaged.
Servicing — The user should not attempt to service the appliance. Servicing should be referred to qualified service personnel
or returned to the dealer or call the NEC TECH service line for assistance at 1-800-632-4662.
The lightning flash with arrowhead, within an
equilateral triangle, is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
CAUTION: TO PREVENT THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER- SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in
the literature accompanying the appliance.
IMPORTANT
203 Eng Fr Cndn manual 12/21/98 11:19 AM Page 3
The FCC Wants You to Know
1. Use the attached specified cable with the MultiSync®IntelliBase™USB Hub and Audio so as
not to interfere with radio and television reception.
Please use the supplied power cable or equivalent to ensure FCC compliance.
2. This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
a) Reorient or relocate the receiving antenna.
b) Increase the separation between the equipment and receiver.
c) Connect the equipment to an outlet on a circuit different from that to which the receiver
is connected.
d) Consult your dealer or an experienced radio/TV technician for help.
If necessary, the user should contact the dealer or an experienced radio/television technician
for additional suggestions. The user may find the following booklet, prepared by the Federal
Communications Commission, helpful: “How to Identify and Resolve Radio-TV Interference
Problems.” This booklet is available from the U.S. Government Printing Office, Washington,
D.C., 20402, Stock No. 004-000-00345-4
Connecting the Power Cord
AC Wall Socket
Long slot
is neutral
(ground) side.
Insert the wide
blade into the
ground side slot.
CAUTION: To prevent electric shock do not
use this (polarized) plug with an extension
cord, receptacle or other outlet unless the
blades can be fully inserted to prevent blade
exposure.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
203 Eng Fr Cndn manual 12/21/98 11:19 AM Page 4
1
MultiSync
®
IntelliBase
™
USB and
Audio
User's Manual
User’s
Manual
IntelliBase
™
USB AUDIO
Audio Management Software
Version 1.0
®
CD-ROM
Contents
Your new NEC Technologies MultiSync®IntelliBase™USB Hub
and Audio carton box* should contain the following:
•MultiSync IntelliBase USB Hub and Audio (IB-USB AUDIO)
• AC Adapter • Adapter Plate A
• User’s Manual • Adapter Plate B
• Registration Card • CD-ROM
•Audio and USB Cable
• Screws AC Adapter
*Remember to save your original box and packaging
material to transport or ship the MultiSync IntelliBase USB Hub and Audio.
Note: You can register your product on the Internet at
http://www.prodreg.com/nec
Registration
Card
— Important —
To help us in our continuing efforts to
better serve and support you, and to
bring you new and innovative products,
please take a few moments to register
your new NEC MultiSync monitor.
By returning this card, we confirm your
date of purchase and records the model
and serial numbers. This facilitates our
ability to process warranty claims,
especially if your original proof of
purchase is lost.
Thank you for your time and for
choosing an NEC MultiSync monitor.
THANK YOU FOR
CHOOSING AN NEC
MultiSync
®
IntelliBase
™
PRODUCT REGISTRATION
NEC MultiSync Monitors
MultiSync
IntelliBase
USB Hub and Audio
USB Cable
Audio Cable
Adapter
Plate B
Adapter
Plate A
Screws
203 Eng Fr Cndn manual 12/21/98 11:19 AM Page 5
Quick Start
How to attach IntelliBase™USB Hub and Audio to your
MultiSync®brand monitor
THE INTELLIBASE USB HUB AND AUDIO WILL ONLY WORK WITH THE
MULTISYNC BRAND MONITORS LISTED BELOW. DO NOT ATTEMPT TO
CONNECT THE INTELLIBASE WITH ANY OTHER MONITOR BRANDS.
MAKE SURE THE MONITOR IS DISCONNECTED FROM THE SYSTEM AND
IS UNPLUGGED FROM THE WALL OUTLET BEFORE ANY WORK IS DONE
ON THE MONITOR.
FOR ALL 21” MULTISYNC MONITORS
IT IS ADVISED THAT TWO PEOPLE ARE INVOLVED DURING THE ENTIRE
INSTALLATION PROCESS. ONCE THE INTELLIBASE HAS BEEN INSTALLED
ONTO YOUR 21” MONITOR, DO NOT ATTEMPT TO ADJUST THE TILT OF THE
MONITOR FROM THE BACK OF THE MONITOR UNIT. ONLY ADJUST THE TILT
FROM THE FRONT OF THE UNIT BY HOLDING ONTO THE LEFT AND RIGHT
SIDE OF THE MONITOR, TILTING EITHER UPWARDS OR DOWNWARDS. DO
NOT TILT THE MONITOR DOWNWARDS MORE THAN 5 DEGREES OR FORCE
THE MONITOR PAST THE FIRST STOP, AS THE MONITOR MAY BECOME
UNSTABLE, CAUSING POSSIBLE INJURY.
If you have any questions or comments, please contact NEC at 1-800-632-4662
To attach the IntelliBase to your MultiSync brand monitor, the original base
must first be removed. Depending on the model of your MultiSync brand
monitor, the removal procedure of the original base and the attachment of
the IntelliBase will vary. Locate the model name (located in the lower right
corner of your monitor’s bezel) of your MultiSync brand monitor in the table
below. Follow the removal procedure to detach the original base from your
monitor using the diagrams on the following pages and attach the IntelliBase
to your monitor.
2
MultiSync Monitor Model Names
Original Monitor Base
Removal and IntelliBase
Installation Instructions
MultiSync 50, MultiSync 70, XV15 and
XV15+
MultiSync XE15, XE17, XP15, XP17, XV17,
XV17+, A500, A500+, A700, A700+,
A900, E500, E700, E900, E900+, M500,
M700 and P750
MultiSync XE21, XP21, E1100, E1100+,
P1150 and P1250+
Page 3
Page 5
Page 7
203 Eng Fr Cndn manual 12/21/98 11:19 AM Page 6
3
Step 2 Using a Phillips screwdriver, remove the screw securing the original
base to the monitor as shown in Figure 2A. Remove and save the
original base for possible future use.
Note: Do not remove the spindle or swivel plate.
Figure 2A
MultiSync®Monitor Model Names
MultiSync 50, MultiSync 70, XV15 and XV15+
Step 1 With the monitor
unplugged from your
system and the wall
outlet, carefully
turn the monitor
upside down on
a firm table so that
the base is facing
up as shown
in Figure 1.
Figure 1
MONITOR IN POSITION TO
REMOVE THE BASE AND ATTACH
INTELLIBASE USB HUB AND AUDIO
BASE
SWIVEL
PLATE SPINDLE
DO NOT REMOVE SPINDLE OR
SWIVEL PLATE
BASE
203 Eng Fr Cndn manual 12/21/98 11:19 AM Page 7
Step 4 Locate the two
screws that are
supplied with
the IntelliBase
and attach the
IntelliBase to
the adapter plate
and monitor
as shown
in Figure 2C.
Proceed to Page 10 to connect your MultiSync®monitor with the IntelliBase
USB Hub and Audio to your system.
4
Figure 2C
Step 3 Locate Adapter
Plate “A” that
is supplied with
the IntelliBase™
and secure it to
the spindle using
the screw that
was removed
in Step 2
as shown in
Figure 2B.
Figure 2B
GUIDE SPINDLE
THROUGH CENTER
HOLE ON ADAPTER
PLATE (A)
ADAPTER
PLATE (A)
SPINDLE
INTELLIBASE
(BOTTOM VIEW)
ROTATE ADAPTER
PLATE UNTIL IT
ALIGNS WITH
THROUGH HOLES
ON THE BASE
203 Eng Fr Cndn manual 12/21/98 11:20 AM Page 8
5
MultiSync®Monitor Model Names
MultiSync XE15, XE17, XP15, XP17, XV17, XV17+, A500, A500+ A700,
A700+, A900, E500, E700, E900, E900+, M500, M700 and P750
Step 1 With the monitor
unplugged from your
system and wall
outlet, carefully
turn the monitor
upside down on
a firm table so that
the base is facing
up as shown
in Figure 1.
Step 2 Using your thumbs, push on the locking tabs while pulling forward
and up as shown by the directional arrow in Figure 3A. This
action releases the base from the monitor. Remove and save the
original base for possible future use.
Figure 3A
Figure 1
MONITOR IN POSITION TO
REMOVE THE BASE AND ATTACH
INTELLIBASE USB HUB AND AUDIO
BASE
BASE
LOCKING
TABS
203 Eng Fr Cndn manual 12/21/98 11:20 AM Page 9
6
Step 3 Using a Phillips
screwdriver, remove
the screw securing
the two base halves
together as shown
in Figure 3B.
Retain the screw
and black nylon
washer for use
in the next step.
Figure 3B
ORIGINAL MOUNTING
RETAIN
THESE
PARTS TO
USE IN
NEW
MOUNTING
Step 4 Locate Adapter Plate “B”
that is supplied with
the IntelliBase™and
secure it to the spindle
using the screw and
black nylon washer that
was removed in Step 2
as shown in Figure 3C.
BASE
ADAPTER
PLATE (B)
NEW MOUNTING
Figure 3C
Step 5 After the adapter plate has
been attached to the base,
snap the base assembly to
the monitor. To accomplish
this, position all the locking
tabs on the base so they
mate with the holes in the
monitor. Slide the base
assembly in place as
shown in Figure 3D.
Figure 3D
203 Eng Fr Cndn manual 12/21/98 11:20 AM Page 10
Questo manuale è adatto per i seguenti modelli
2
Indice
Lingue:
Altri manuali NEC Interruttore
NEC
NEC QX-S5500G Series Manuale utente
NEC
NEC SigmaBlade N8406-022 Manuale utente
NEC
NEC NEC Express5800 Series Manuale utente
NEC
NEC N8406-023 Manuale operativo
NEC
NEC mPD98410 Manuale utente
NEC
NEC 2400 Guida rapida alla configurazione
NEC
NEC NEC Express5800 Series Manuale utente
NEC
NEC SMB8000 Manuale utente
NEC
NEC InfiniBand NE3707-061 Manuale utente
NEC
NEC SA3500G Manuale utente
