NEC Electra 16/48 Manuale utente

Get other manuals https://www.bkmanuals.com

Lift handset. z<

PLACING AN OUTSIDE tIiAitUSlNG HANDSFREE DlAllNG *

Depress idle outside line button.

Dial desired telephone number.

Depress ON/OFF button.

NOTE: When placing consecutive calls

Depress idle outside line button.

the RECALL button may be used to

Dial desired telephone number,

disconnect existing call and to

Lift handset when called partys voice isheard through speaker,

provide dial tone.

[Handset not required when equipped with Speakerphone.]

NOTE: If “bus\/’ or “no answer” is received, depress ON/OFF button to disconnect.

Establish connection as outlined above.

Lift handset when ready to resume conversation.

Depress ON/OFF button to begin monitoring.

(Handset not required when equipped

Replace handset [adjust volume if necessary),

with Speakerphone.)

Lift handset,

(Depress ON/OFF button if equipped with Speakerphone.)

Depress slow-flashing outside line button,

ANSWERINGANATTENDANTTRANSFERREDCALL

When the attendant transfers an outside call to your station, a “C” will momentarily appear in your

display and ring tone will be heard through your speaker.

Lift handset,

(Depress ONIOFFbutton if equipped with Speakerphone.)

Depress flutter-flashing outside line button.

Get other manuals https://www.bkmanuals.com

Lift handset, (Depress

ON/Off

bution ifequipped * Dial digit “1” to transmit tone signal.

with Speakerphone.)

NOTE: When calling a Single Line telephone,

Depress ICM button,

no voice announcement is available.

Dial desired station number,

Ring signal will be automatically pro-

vided.

Voice announce after hearing tone burst;

PLACING AN INTERCOM CALL USING STATIONOSSBUTTONS

Lift handset.

(Depress ON/OFF button if equipped with Speakerphone.)

Dial digit “1” to transmit

Depress desired station DSS button.

tone signal.

Voice announce after hearing tone burst;

Receive tone burst and voice

Depress ICM button.

announcement or tone signal.

Lift handset to begin conversation.

ANSWERING INTERCOM CALLS USING HANDS FREEANSWERBACK

Receive tone burst and voice

announcement.

Check that MC-ON LED is lit.

Answer via microphone without

lifting handset.

Get other manuals https://www.bkmanuals.com

SETTINGCALLBACKREQUEST

Call station and receive “no answer” or Call Waiting Tone.

l Dial “#“.

Verify at display: ‘5” = accepted “d” = denied

If accepted, your station number will flash intermittently in the called key set’s display, indicating your “call back request”.

SETTINGAUTOMATICCALLBACK

Call station and receive Call Waiting Tone.

l Dial “0”.

Verify at display: “Cb” = accepted “d” = denied

If accepted, you will receive tone signal when the called station becomes idle.

You may now lift the handset and proceed as if normal ICM call.

ACTIVATINGTONEOVERRIDE

Call station and receive Call Waiting Tone.

l Dial “W.

Verify at display: “0” = accepted “d” = denied

If accepted, tone will be sent through called key set’s speaker (or Single Line handset) and your station number will

appear in the key sets display.

NOTE: A Tone Override to your key set may be answered by depressing the HOLD button.

INTERCOM

CALLS

Get other manuals https://www.bkmanuals.com

Depress HOLD button.

Held line button will wink intermittently on your keyset. All other keysets will receive a rapid-flash

on that line button.

NOTE: When you place an intercom call on hold, the HOLD button will rapid-flash.

PLACING CALLS ON EXCLUSIVE HOLD

Depress HOLD button twice.

Held line button will wink intermittently on your keyset. All other keysets will receive a steadily lit

LED on that line button.

NOTE: If a call remains on exclusive hold longer than a preset interval after handset has been restored, the line button

will flutter flash. If your key set is idle, tone will be received through speaker.

Lift handset,

[Depress ONIOFFbuffon if equipped with Speakerphone.)

Depress intermittently winking or rapid flashing line button.

NOTE: Depress rapid-flashing HOLD button for intercom calls

Get other manuals https://www.bkmanuals.com

;i.

Depress HOLD button.

Depress ICM button.

Dial desired station number.

Announce transfer, informing station which line to pick up.

NOTE: When transferring a call to a station which does not have that line appearance, the following procedure must be

used;

Depress HOLD button.

Depress ICM button.

Dial desired station number and wait for party to answer over handset.

Depress ADD/ON button.

Depress intermittently winking line button.

Confirm transfer and replace handset.

ONESTEP CALL TRANSFER USING STATIONDSSBUTTONS

Depress desired station DSS button; call isautomatically placed on hold and an intercom con-

nection is established.

Announce transfer, informing station which line to pick up.

Get other manuals https://www.bkmanuals.com

Depress ADD/ON button.

Dial three digit station number to be programmed.

Depress desired station DSS button (I-20)

Depress ADD/ON button again.

INTERCOM CALLING USING STATIONDSSBUTTONS

Lift handset.

(Depress ONIOfFbutton if equipped with Speakerphone.)

Dial digit “1” to transmit

Depress desired station DSS button.

tone signal. .

Voice announce after hearing tone burst;

NOTE: When calling a single line telephone, no voice announcement is available. Ring signal will automatically

be provided,

Depress ADD/ON button.

Depress desired speed dial button (II-20), or (I-20) when assigned expanded speed dialing.

Dial line access code (9,8,7 or 0).

Dial telephone number to be programmed

[pauses and hook flashes may be programmed into speed cfid).

Depress ADD/ON button again.

NOTE 1: Dialing access codes V”, “8” or “7” will cause a line to be selected automatically when using station speed dialing,

unless a line is manually selected. If “0” is dialed, an outside line must be manually selected.

NOTE 2: Depress HOLD button to program PAUSE; depress RECALL button for HOOKFLASH.

PLACING A CALL USING STATIONSPEEDDIALING

Lift handset or depress ON/OFF button,

Depress desired station speed dial button, (Depress line button if a particular line isdesired).

When party has answered, use handset to begin conversation. (Handsef not required when

equipped

with Speakerphone.)

Get other manuals https://www.bkmanuals.com

Depress speed dial button to be verified (I-20) while keGet is idle.

Read number in display (one digit at a time).

Lift handset or depress ON/OFF button.

Depress idle outside line button.

Dial “#” and two-digit access code. (IO-IO>

When party has answered, use handset to begin conversation,

(Hcmdsef not required when equipped with Speakerphone.)

Consecutive speed dialing has particular value when accessing Specialized Common Carrier

Networks, where multiple dialing sequences are required.

Lift handset or depress ON/OFF button.

Depress idle outside line button.

Access speed dialing (system/station). (LOCAL ACCESS NUMBER]

(If initiating system speed dialing, depress ADD/ON button.)

Access speed dialing (system/station] (AUTHORIZATION CODE)

(If initiating system speed dialing, depress ADD/ON but-ton.)

Access speed dialing (system/station) or dial manually. (LONG DISTANCE NUMBER)

When party has answered, use handset to talk.

[Handset not required when equipped with Speakerphone.)

Get other manuals https://www.bkmanuals.com

ATHREE-PARTYCONFERENCE

Establish first call.

Depress HOLD button,

Establish second call.

Depress ADD/ON button.

Depress held line button (or HOLD button for intercom call).

NOTE: A three-party conference may consist of the following:

3 internal stations 2 internal stations + 1 outside line 1 internal station + 2 outside lines

AFOUR-PARTYCONFERENCE

Establish three-party conference as outlined above.

Depress HOLD button.

Establish third call,

Depress ADD/ON button.

Depress rapid-flashing HOLD button.

NOTE: A four-party conference may consist only of 3 internal stations and one outside line

Depress ON/OFF button.

Depress ICM button.

Dial 56”.

Depress busy outside line button.

Verify at display ” s ” if accepted.

Depress ON/OFF button.

NOTE: Your

phone

will be tone signalled when a line is available. Depress the

fluttering LED at outside line and dial telephone number.

Get other manuals https://www.bkmanuals.com

Altri manuali per Electra 16/48

Indice

Altri manuali NEC Telefono

NEC

NEC Univerge SV8100 Manuale utente

NEC

NEC Univerge SV8100 Guida all'installazione

NEC

NEC ElectraElite IPK Manuale del proprietario

NEC

NEC UNIVERGE SL2100 Guida all'installazione

NEC

NEC Aspire Manuale utente

NEC

NEC NEAX1400 IMS Manuale utente

NEC

NEC UNIVERGE SV7000 Manuale utente

NEC

NEC Aspila Topaz Scheda informativa del prodotto

NEC

NEC SL100 Manuale del proprietario

NEC

NEC Univerge SV9100 Manuale utente

NEC

NEC Univerge SV8100 Manuale di istruzioni

NEC

NEC DT400 Manuale utente

NEC

NEC UNIVERGE SV9300 DT410 Manuale utente

NEC

NEC Dterm Series i Manuale utente

NEC

NEC AT-35 Manuale utente

NEC

NEC ST4 Manuale utente

NEC

NEC Univerge DT820 Manuale utente

NEC

NEC UNIVERGE SL2100 Manuale utente

NEC

NEC Aspire Manuale utente

NEC

NEC Dterm Series i Manuale utente

NEC

NEC XN120 Vision Manuale utente

NEC

NEC Univerge SV8100 Manuale utente

NEC

NEC IPK II Manuale utente

NEC

NEC DT330 Manuale utente

Manuali Telefono popolari di altre marche

GE 2-9480 Manuale utente

Geemarc

Geemarc PHOTOPHONE 155 Manuale utente

D-Link

D-Link DWR-720/PW Manuale utente

Interquartz

Interquartz Gemini IQ333 Manuale utente

SSS Siedle

SSS Siedle HT 840-0 Manuale utente

Motorola

Motorola TITANIUM Manuale utente

Panasonic

Panasonic ICX Manuale utente

LG H870DS Manuale utente

Samsung

Samsung GT-I9500 Manuale utente

AT&T

AT&T Trimline 205 Manuale utente

Selta

Selta zenyth 600 Manuale utente

Doro

Doro AFTI 20 Manuale utente

UNIQCELL

UNIQCELL A1 Manuale utente

Panasonic

Panasonic KX Series Manuale utente

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manuale utente

BT Decor 425 Manuale utente

Teledex

Teledex PEARL Manuale utente

Ericsson

Ericsson Dialog 3213 Manuale utente