NEC FS-59T90 Manuale utente

MODEL No.

FS-59T90

FS-68T90

Instruction Manual

Colour Television

Contents

Important safeguards 1

Before Operation 2

Connecting external equipment 3

Identification of Controls 5

Daily use 7

Menus 9

Teletext 15

Specifications 18

Important safeguards

WATER AND MOISTURE

Never install the set in the following places : In a

wet basement, bathroom. Do not place any

container with liquid on the set.

HEAT

Never place the set near heat sources.

VENTILATION

Do not cover the ventilation openings in the

cabinet and never place the set in a confined

space such as a bookcase or built-in unless proper

ventilation is provided.

Leave a minumum 10cm gap all around the unit.

OBJECT ENTRY

Do not insert foreign objects, such as needles and

coins, in the ventilation openings.

LIGHTNING STRIKING

You should disconnect the set from the mains and

the aerial system during thunderstorms.

CLEANING

Unplug the set from the mains during cleaning.

AFTER MOVING THE SET

If the set is moved in a different direction, the

MAIN POWER button must be switched off for at

least 15 minutes in order to take out a colour strain

on the screen.

-The appliance is not intended for use by young children or infirm persons without supervision;

-Young children should be supervised to ensure that they do not play with the appliance.

Before Operation

INSERTING BATTERIES INTO THE REMOTE

CONTROL UNIT

Insert the batteries (two 1.5V, type AA)

MAINS CONNECTION

Plug the mains cable into the power socket with 240V/50Hz AC.

AERIAL CONNECTION

When using an outdoor aerial, it is usually connected to the set

by means of 75 ohm.

SWITCHING ON AND OFF

Switching on

Switch the set on with the MAIN POWER button(ON/OFF),

and then CH UP or DOWN button on the front of the set.

Or OPERATE button or the CH UP/DOWN button or one of the

NUMBER buttons on the remote control.

NOTE : When switching power on, full picture and sound shall

appear in 6-8 seconds. This is to ensure optimum picure

stabilisation. This is indicated by a blinking LED indicator.

Switching off

Press OPERATE button( ), on the remote control to

return the set to its stand by mode.

If you don't use the set for an extended period of time, turn

it off with MAIN POWER button on the set.

OPERATE

SLEEP

VOL

CH-CALL

PICTURE/OK

TV/VIDEO

VOL

Battery options

Connecting external equipment

TV AND AV

RF OUTPUT (RCA JACK)

Use the TV/VIDEO button on the remote control or on the front of the set to select one of

the three options. Whenever the TV/VIDEO button is pressed, the on-screen display will

be changed as shown: AV1 AV2 S-VHS TV

This always provides the RF signal output of the selected channel. This is used to connect

a VCR for recording or a monitor device for displaying.

Connecting to a Mono VCR

When connecting a Mono VCR, you can achieve sound from both speakers if you connect the white

cable (left audio) to the “Audio Out” of the VCR. Press the MODE button several times(on TV remote

control) until “L -input” is displayed on the TV screen.

(Note) If you choose “R -input” mode, there will be no sound. If you choose “Stereo” mode, there

will be only one speaker operating.

INPUT1 (SCART JACK)

This is used to connect a VCR, a Camcorder, a S-VHS VCR.

You can also receive the S-VHS singal with SCART JACK by selecting S-VHS mode with

TV/VIDEO button.

✳ OPTION : You can also use the SCART to RCA/S-VHS connector for the reception of the S-

VHS signal.

VIDEO LAUDIO R S-VHS

OUTPUT

INPUT1(S-VIDEO)

AUDIO

VIDEO

VCR

INPUT2 (RCA JACK)

Connect the AV (Audio/Video) socket with an appropriate

cable to the corresponding socket of the external equipment.

Select AV mode by pressing the TV/VIDEO button.

Press the TV/VIDEO button to return to the TV mode.

HEADPHONE JACK

Insert the headphone plug(3,5mm) into the

headphone socket.

The sound from the speaker will be cut off.

CAMCORDER

VIDEO GAME

FRONT CONTROL

Front

Back

Identification of Controls

MAIN

POWER

BUTTON

VIDEO

INPUT

Aerial Terminal

RCA Socket

Scart Socket

AUDIO

INPUT HEAD

PHONE

REMOTE

SENSOR

STAND-BY

INDICATOR TV/VIDEO

BUTTON

VOLUME

DOWN/UP

BUTTONS

CHANNEL

DOWN/UP

BUTTONS

OUTPUT

INPUT1(S-VIDEO)

AUDIO

VIDEO

FS-68T90

FS-59T90

REMOTE CONTROL

OPERATE

SLEEP

VOL

CH-CALL

PICTURE/OK

SKIP

TV/VIDEO

MOVE

DELETE

MODE

VOL

TELETEXT mode

1 OPERATE

2 NUMBER 0-9

3 INDEX

4 MIX

5 PAGE UP

6 SUBPAGE

7 MENU

8 PAGE DOWN

9 HOLD

10 MUTE

11 REVEAL

12 SIZE

13 CANCEL

14 Green Key

15 Red Key

16 TV/TEXT

17 Yellow Key

18 Cyan Key

TV mode

1 OPERATE

2 NUMBER 0-9

3 PICTURE/OK

4 TV/VIDEO

5 CH (CURSOR)UP

6 VOLUME UP (CURSOR RIGHT)

7 MENU

8 CH(CURSOR) DOWN

9 VOLUME DOWN(CURSOR LEFT)

10 MUTE

11 RECALL

12 SLEEP

13 Not Used

14 MOVE(Edit mode only)

15 SKIP(Edit mode only)

16 TV/TEXT

17 DELETE(Edit mode only)

18 MODE(Sound Mode Change)

Direct selection

Use remote control NUMBER 0…9 buttons.

For two digits programme numbers, press the

button for the second digit within 2.5 seconds.

Up/Down moves

Use CH UP/DOWN buttons of the remote

control unit or on the front of the set.

DAILY USE

PROGRAMME SELECTION

Volume adjustment

Use VOLUME UP/DOWN buttons of the remote

control unit or on the front of the set.

Mute

Get sound off pressing remote control

MUTE ( ) button. Then, logo ( ) is

displayed.

Sound returns pressing the same button once

more.

Mono forcing, Bilingual language

If you are unable to get a good sound on a

channel due to a poor stereo broadcasting

signal, you can change from stereo to mono

transmission by pressing remote control MODE

button. Then the programme status concerning

this programme indicates "Mono" (in red colour).

On the other hand, during a bilingual

programme, MODE button allows you to hear

the second language. To return to initial state,

press MODE button once more. For other

adjustments (bass, treble, balance and sound

effect) see sound menu page 10.

SOUND CONTROL

VOL

MODE

You can choose between three picture settings,

using repeatedly remote control PICTURE button :

Normal I (standard hard picture)

Normal II (standard soft picture)

Favourite (you can adjust picture setting as you

want, using Picture menu).

For other adjustments : Brightness, contrast,

colour, sharpness, see Picture menu. (page 10)

PICTURE CONTROL

PICTURE/OK

The sleep function will switch the television to

stand-by after a set period of time.

Pressing repetitively the remote control SLEEP

button, you can enter one of the following

settings :

OFF >30 min > 60 min > 90 min >120 min >OFF

The remaining time before TV turn-off is

displayed on programme status.

Programme number.

-----

Channel name.

NICAM STEREO

Sound transmission mode : Displayed in red color only if

forced to mono by MODE button.

11:11

Clock.

SLEEP 60

Remaining time (minutes)

before TV set turns off.

Only when sleep function is activated.

SLEEP FUNCTION

SLEEP

PROGRAMME STATUS DISPLAY

01 -----

NICAM STEREO

11:11

SLEEP 60

Questo manuale è adatto per i seguenti modelli

Indice

Manuali TV popolari di altre marche

Philips

Philips Colour Television Manuale utente

Toshiba

Toshiba 27A10 Manuale utente

Philips

Philips 42PF9630A/37 Manuale utente

Hitachi

Hitachi 32FX48B Manuale utente

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manuale utente

Changhong Electric

Changhong Electric uhd55b6000is Manuale utente

Philips

Philips Matchline 21CE7551 Manuale utente

Panasonic

Panasonic Genus TX-G10 Manuale utente

Toshiba

Toshiba 19A20 Manuale utente

Philips

Philips 25PT4523-16 Manuale utente

Sony

Sony XBR-100Z9D Manuale utente

Philips

Philips PR0930X3 Manuale utente

Philips

Philips Brilliance 231P4QPY Manuale utente

Samsung

Samsung 55S9 B Series Manuale utente

Philips

Philips 32HF9385D Guida alla risoluzione dei problemi

Sharp

Sharp LC-40FI5012E Manuale utente

Loewe

Loewe Table Stand Reference 55 Manuale utente

Philips

Philips 32PFH5300 Manuale utente