NEC MultiSync LCD4020 Manuale utente

Altri manuali per MultiSync LCD4020

4

Questo manuale è adatto per i seguenti modelli

2

Manuali TV popolari di altre marche

Philips

Philips Colour Television Manuale utente

Toshiba

Toshiba 27A10 Manuale utente

Philips

Philips 42PF9630A/37 Manuale utente

Hitachi

Hitachi 32FX48B Manuale utente

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manuale utente

Changhong Electric

Changhong Electric uhd55b6000is Manuale utente

Philips

Philips Matchline 21CE7551 Manuale utente

Panasonic

Panasonic Genus TX-G10 Manuale utente

Toshiba

Toshiba 19A20 Manuale utente

Philips

Philips 25PT4523-16 Manuale utente

Sony

Sony XBR-100Z9D Manuale utente

Philips

Philips PR0930X3 Manuale utente

Philips

Philips Brilliance 231P4QPY Manuale utente

Samsung

Samsung 55S9 B Series Manuale utente

Philips

Philips 32HF9385D Guida alla risoluzione dei problemi

Sharp

Sharp LC-40FI5012E Manuale utente

Loewe

Loewe Table Stand Reference 55 Manuale utente

Philips

Philips 32PFH5300 Manuale utente

1.1) Lay LCD on a mat as in Fig.1 (in order not to damage LCD).

1.2) Remove STAND

(if used) and BEZEL

(Number of screws

that hold the STAND

is 2 pieces.

Number of screws

that hold the BEZEL

is 12 pieces.)

3.2) Put protective glass on the panel.

NOTE:Align edge (refer to Fig. 3.4).

3.3) Reinstall the BRACKET PWB IR and rear cover.

(Number of screws that hold the rear cover is 3 pieces.)

NOTE: Adjust the position of BRACKET PWB IR to the

lower hole.

Figure 3.1 Figure 3.2

Figure 3.3

Figure 3.5

Figure 3.4

Align edge

60mm

60mm

2.1) Remove the part of the rear cover indicated in figure 2.1 and

the BRACKET PWB IR. (Number of the screws that hold the

rear cover is 3 pieces.)

3.1) Paste TAPE-1 (DOUBLE sided ADHESIVE TAPE) and peel

the paper off. Specification of TAPE-1 should be equivalent

to "3 VHB tape 9473".

NOTE: 1. Do not paste TAPE-1 on panel's active area.

2. Do not paste TAPE-1 on the area in Fig. 3.2.

Figure 1

Figure 2.1

Figure 2.2

Adjust t e position of BRACKET

PWB IR to t e lower ole.

Remove BRACKET PWB IR

rear cover

Remove t e t ree screws

Paste TAPE-1 on t is area

Do not paste TAPE-1

on t is area. T is note

refers to all 4 corners.

BRACKET PWB IR

INSTALLATION ANUAL

PROTECTIVE GLASS

FOR ULTISYNC

®

LCD4020,

LCD4620 AND LCD5220

NECESSARY CO PONENTS:

- 1 piece protective glas (supplied)

- brackets (supplied) (40"-11pcs, 46"-13pcs, 52"-12 pcs)

- tape, "3 VHB tape 9473" or equivalent (not supplied)

- tape, "Scotchfoam 4718 3,2/12,7mm" or equivalent (not supplied)

Product used for demonstration in this manual: LCD4020

All manuals and user guides at all-guides.com

all-guides.com

Figure 4.3 Position A Position B 6.2) Finish

6.1) Install screws and put screw labels back on.

(Number of screws that hold BEZEL is 12 pieces.

Number of labels is 12 pieces.)

Figure 4.4

Figure 5.1 Figure 5.2

Figure 6.1

Figure 6.3

Figure 6.2

Figure 5.3

Figure 5.4

Figure 4.2

4.2) Paste 11 pieces of BRACKET-4 to panel.

NOTE: 1. Adjust the position of BRACKET-4 to the upper hole

in case of POSITION A.

2. Adjust the position of BRACKET-4 to the lower hole in case

of POSITION B.

Figure 4.1

4.1) Paste TAPE-2 (DOUBLE sided ADHESIVE TAPE) on

BRACKET-4 and peel off the paper.

(Number of BRACKET-4 is 11 pieces.) Specification of

TAPE-2 should be equivalent to "3 VHB tape 9473".

NOTE: Do not paste TAPE-2 on the holes.

Adjust t e position of BRACKET

PWB IR to t e upper ole.

Adjust t e position of

BRACKET-4 to t e lower ole.

Align edge

Original

Protection glass

10 mm

5 mm

5.1) Paste TAPE-3. Specification of TAPE-3 should be equivalent

to "

Scotchfoam 4718 3,2 / 12,7mm

". Ideal Size: 5mm (H) X 10mm

(W) (Fig. 5.2) NOTE: Align the edges of the panel and the glass

(refer to Fig.5.1). 2.Carefully move the BRACKET PWB IR as in

Fig. 5.3, when pasting TAPE-3.

Paste TAPE-2 on t is area

BRACKET-4 TAPE-2

A

A

A

A

A

A

BA

A AA

Peel paper off after pasting TAPE-2

TAPE-3

All manuals and user guides at all-guides.com