Necchi HD22 Manuale utente
INSTRUCTION BOOK
IMPORTANT SAFETY INSTRUCTIONS
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with this sewing machine.
When using an electrical appliance, basic safety precautions should always be followed, including the
following:
This sewing machine is designed and manufactured for household use only.
Read all instructions before using this sewing machine.
DANGER— To reduce the risk of electric shock:
1. An appliance should never be left unattended when plugged in. Always unplug this sewing machine from the electric outlet immediately after
using and before cleaning.
2. Always unplug before replacing a sewing machine bulb. Replace bulb with same type rated 15 Watts.
WARNING—To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near children.
2. Use this appliance only for its intended use as described in this owner’s manual.
Use only attachments recommended by the manufacturer as contained in this owner’s manual.
3. Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped
into water.
Return this sewing machine to the nearest authorized dealer or service center for examination, repair, electrical or mechanical adjustment.
4. Never operate the appliance with any air opening blocked. Keep ventilation openings of this sewing machine and foot controller free from
accumulation of lint, dust and loose cloth.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
8. To disconnect, turn all controls to the off (“O”) position, then remove plug from outlet.
9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
10. Keep fingers away from all moving parts. Special care is required around the sewing machine needle and/or cutting blade.
11. Always use the proper needle plate. The wrong plate can cause the needle to break.
12. Do not use bent needles.
13. Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
14. Switch this sewing machine off (“O”) when making any adjustment in the needle area, such as threading the needle, changing the needle,
threading the bobbin or changing the presser foot, and the like.
15. Always unplug this sewing machine from the electrical outlet when removing covers, lubricating, or when making any other adjustments
mentioned in this owner’s manual.
SAVE THESE INSTRUCTIONS
1
TABLE OF CONTENTS
SECTION I ESSENTIAL PARTS
Names of Parts ............................................................................................ 2~3
SECTION II GETTING READY TO SEW
Connecting the Machine to the Power Supply ................................................ 6
Foot Control ..................................................................................................... 7
Sewing Light .................................................................................................... 7
Extension Table (Accessory Box) .................................................................... 8
Pressure Regulator .......................................................................................... 9
Dropping the Feed Dogs ............................................................................... 10
To Snap On and Snap Off the Presser Foot ................................................. 11
Changing Needles ......................................................................................... 12
Thread and Needle Chart .............................................................................. 13
Removing or Inserting the Bobbin Case ....................................................... 14
Winding the Bobbin ....................................................................................... 15
Threading Bobbin Case ................................................................................. 16
Threading the Machine .................................................................................. 17
Drawing Up Bobbin Thread ........................................................................... 18
Balancing Needle Thread Tension ................................................................ 19
Zigzag Width Dial .......................................................................................... 20
Pattern Selector Dial...................................................................................... 20
Stitch Length Dial .......................................................................................... 20
SECTION III BASIC SEWING
Straight Stitch Sewing ................................................................................... 21
Changing the Sewing Directions ................................................................... 22
Zigzag Stitching ............................................................................................. 22
SECTION IV UTILITY STITCHING
Overcasting .................................................................................................... 23
Overedge Stitch ............................................................................................. 23
Tricot Stitch .................................................................................................... 24
Triple Strength Stitch ..................................................................................... 24
Buttonhole Stitching................................................................................. 25~26
Sewing Buttons .............................................................................................. 27
Zipper Application .......................................................................................... 28
Blind Stitch Hemming .................................................................................... 29
Rolled Hem .................................................................................................... 31
Fagoting Stitch ............................................................................................... 31
Box Stitching .................................................................................................. 31
Elastic Stretch Stitch ..................................................................................... 32
SECTION V DECORATIVE STITCHING
Shell Tuck ...................................................................................................... 32
Feather Stitch ................................................................................................ 33
Decorative Satin Stitch Patterns ................................................................... 34
Stretch Stitch Patterns ................................................................................... 34
SECTION VI CARE OF YOUR MACHINE
Dismantling and Assembling Hook Race ...................................................... 35
Cleaning the Feed Dogs ................................................................................ 36
Oiling the Machine ......................................................................................... 37
Trouble Shooting ..................................................................................... 38~39
2
ESSENTIAL PARTS
q
w
e
r
t
y
u
i
o
!0
!1
!2
!3
!4
!5
!6
!7
!8
!9
Names of Parts
Reverse stitch lever
Stitch length dial
Pattern selector dial
Bobbin winder stopper
Bobbin winder spindle
Spool pins
Zigzag width dial
Top cover
Bobbin winder thread guide
Thread take-up lever
Pressure regulator
Thread guide
Thread tension dial
Face plate
Check spring holder
Thread cutter
Needle plate
Extension table
(Accessory storage box)
Slide plate
t
e
r
q
y
u
w
i
o
!0!1
!2
!3
!4
!5
!6
!7
!8
The design and specifications are subject to change without a prior notice.
Please note that on disposal, this product must be safely recycled in
accordance with relevant National legislation relating to electrical/electronic
products. If in doubt please contact your retailer for guidance. (European
Union only)
3
@0
@1
@2
@3
@4
@5
@6
@7
@8
@9
Carrying handle
Thread guide
Handwheel
Stop motion knob
Machine socket
Belt cover
Presser foot lifter
Needle clamp screw
Free arm
Presser foot
@0
@4
@1
@3
@5
@2
@7 @8
@6
@9
4
How to set the spool pins
Spool pins are separately packed to
prevent any damage in transit.
Therefore, fix the holder of spool pins
in place with a screwdriver, as shown
in the figure.
GETTING READY TO SEW
Connecting the Machine to the Power Supply
Before connecting the power, make sure the voltage and number of cycles
of the machine conform to your electrical power.
Turn the power switch off.
Fit the nonreversible plug into the machine socket and plug the
machine into the power supply.
Turn the power switch on.
Operting instructions:
The symbol “O” of a switch indicates the “off” position of the switch.
To reduce the risk of electrical shock, this plug is intended to fit in a
polalized outlet only one way.
If it does not fit fully in the outlet, reverse the plug. If it does not fit, contact
a qualified electritian to install the proper outlet. Do not modify the plug in
any way.
The foot controller Model YC-482J-EC or TJC-150 is used with this sewing
machines.
5
Sewing speed can be varied by the foot control.
The harder you press on the control, the faster the
machine runs.
Foot Control Sewing Light
Turn the power switch off before relamping.
The sewing light is located behind the face plate.
(A) • To remove... Unscrew
• To replace... Screw
(B) • To remove... Push and twist counter-clockwise
• To replace... Push and twist clockwise
6
Accessory Storage BoxExtension Table
The extension table provides added sewing surface and can be easily
removed for free arm sewing.
Extension Table (Accessory Box)
For free arm sewing
Pull the end of the extension
table away from the machine,
as illustrated.
•Sewing accessories are conveniently
located under the extension table.
For attaching the table
Push the extension table until
its lugs fit into the machine.
7
To increase pressure, push down
the pressure regulator button
until suitable pressure is obtained.
Pressure Regulator
To release pressure, push down
the ring, then the button will spring
up to its highest position.
Setting Position
The top of button should normally be pushed down to about 3/4 position
from its highest position, except for the following:
• Set the top of button at 1/4 position from its highest position for
sewing delicate synthetic fabrics and knitted fabrics which tend to
stretch out of shape.
• Set the top of button at the depressed position to the bottom for
thick and heavier fabrics.
8
To raise the feed dogs, press down
the lever and move it to the direction
of arrow as illustrated.
For dropping the feed dogs, press
down the lever and move it to the
direction of arrow as illustrated.
The drop feed lever is located in the hook area.
Dropping the Feed Dogs
Indice
Altri manuali Necchi Macchina da cucire
Necchi
Necchi K121A Manuale utente
Necchi
Necchi NL11C Manuale utente
Necchi
Necchi 534 FB Manuale utente
Necchi
Necchi FA16 Manuale utente
Necchi
Necchi K408A Manuale utente
Necchi
Necchi EX100 Manuale utente
Necchi
Necchi NC-59QD Manuale utente
Necchi
Necchi 270 Manuale utente
Necchi
Necchi 681C Manuale utente
Necchi
Necchi 590 Manuale utente
Necchi
Necchi Q421A Manuale utente
Necchi
Necchi Creator Manuale utente
Necchi
Necchi NC-102D Manuale utente
Necchi
Necchi NC-103D Manuale utente
Necchi
Necchi Lock 181 Manuale utente
Necchi
Necchi Automatic Supernova Ultra Mark 2 Manuale utente
Necchi
Necchi L234A Manuale utente
Necchi
Necchi Supernova Manuale utente
Necchi
Necchi Q132A Manuale utente
Necchi
Necchi EX30 Manuale utente
