Neilsen CT4539 Manuale utente
CT4539
ORIGINAL INSTRUCTIONS
Cannon Tools Limited
Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K
Read and understand the user and safety instructions before you use the
generator.
EC DECLARATION OF CONFORMITY
We CANNON TOOLS LTD
20 Station road, Rowley Regis, West Midlands,B65 0JU.U.K.
Declare that the design and construction of the following machine, in the form
supplied by us, comply with the requirements of the appropriate EC directives.
Product description: GASOLINE GENERATOR , WELDER & COMPRESSOR
Model: CT4539
Type: AC output / AC tool
fulfills all the relevant provisions of Directives
2006/42/EC, 2014/35/EU, 2014/30/EU, 2004/18/EEC,
2012/19/EU, 2000/14/EC amended by 2005/88/EC
tested in accordance with below standards
EN ISO 8528-13:2016, EN 1012-1:2010, EN
60204-1:2006+A1:2009, EN 60204-1:2006/AC:2010, EN 60974-1;EN 60974-10
CANNON TOOLS LTD
sign
Gurcharan Tony Singh Sanghera
2017-11-20
We want to thank you for your purchase of our state of
the art new CT4539
.This manual will tell you
how to use and maintain the new CT4539
CT4539
,Please
read the manual carefully before operating the
machine.Operating the machine in the best conditions
will increase the lifetime of the unit.
If you have any suggestions for the manual please
contact Industrial. We as a company are striving
to make constant upgrades to our equipment to provide
our customer base with the best units possible. The
specifications for each unit may vary from machine to
machine.
Pls note: This is gasoline generator&welder&
compressor
Power、Welding and Compress air）
but the 3 different output can not work at the same
time. Only one output can work at a time.
GRAPHIC SYMBOLS AND INDICATIONS
X
duty cycle
The ratio of given duration time/the full-cycle time
Note1: This ratio shall be within 0~1, and can be indicated by percentage.
Note2: In this standard, the full-cycle time is 10min.
For example, if the duty cycle is 60%, the load-applying time shall be 6min and the following
no-load time shall be 4min.
U0
No-load voltage
Open circuit voltage of secondary winding
U2
Load voltage
Output voltage of rated load:U2=(20+0.04I2) V
I2
rated welding current
n
rated load speed
n0
rated no-load speed
ni
rated idle speed
P1max
maximum power consumption in kW
A / V—A / V
range of current regulation and corresponding load voltage
DC output voltage symbol （Direct current）
IP23M
IP degree of protection
Symbol of manual metal arc welding with covered electrodes
Can be used in the environment which has high risk of electric shock.
Engine-generator-rectifier
Symbol of single-phase Engine supply
F
Insulation class
•Do not dispose of electrical equipment with normal waste!
•In observance of European Directive 2012/19/EU on waste electrical and
electronic equipment, and its implementation in accordance with national law,
electrical equipment that has reached the end of its life must be collected
separately and taken to an appropriate environmentally responsible recycling
facility
With this symbol the manufacturer confirms that this power tool is in accordance
with applicable European directives.
Caution! Read instruction manual
1 .Safety Instruction
Please read the manual before operation,failure to comply
with the manual could lead to danger of operator,others and
the machine.
- Before use, the generating set and its electrical equipment
(including lines and plug connections) should be checked to
ensure that they are not defective.
- The generating set shall not be connected to other power sources,
such as the power company supply mains.
- Protection against electrical shock depends on circuit breakers
specially matched to the generating set. If the circuit breakers
require replacement, they should be replaced with a circuit
breaker having identical ratings and performances characteristics.
1.1 Protect yourself and others, Welding can make you
and others in danger of many risk factors:Make sure to
never weld without a welding mask. This goes for not only
the operator,but all other by standards as well ,The damages
to eyes include: electric arc, dazzle reflections, dazzle
flicker,sparking molten, metal splashing.Looking at welding
arc without eye protection can inflict great pain and even
temporary blindness. Therefore, this products owner/operator
should ensure the welding machine
operated by a user with prior welding knowledge. Use these
professional protective equipment when operating.
-Face shield
-dedicated heat resistant gloves
-Protective clothing and shoes
1.2. Do not use machine in area where dust pollution,
flammables or explosives are present.
1.3 Power supply and welding current can cause shock
damage. Please do not touch inside or face plate of welding
machine at any time. Make sure operator and all other have
a dry ground insulation
Protection. Do not let your body touch the ground and the
electrode at that same time.
1.4 Welding fumes and gasses can cause serious harm to
operator and all other by standards. Please keep your head
away from a place you could possibly breathe in fumes and
make sure to use the machine in a well ventilated area.
1.5 To prevent any fire hazards do not have any residue of
gasoline or kerosene on your person,cylinder or piping you
may be welding.
1.6 Do not operate machinery if you have a pacemaker. This
includes being anywhere near the machine even if someone
else is operating . The magnetic field produced by the
welding machine could have adverse effects on a
pacemaker.
1.7 Welding splatter can cause fire and explosions. Do not
weld in dangerous situations such as around flammables,
explosives, a closed barrel or pipe.
1.8 There is extreme heat produced by the exhaust pipe,
engine,air compressor and muffler. Please do not touch
these parts or have flammables anywhere near the unit. The
high temperature produced by the exhaust is capable of
igniting any flammables or explosives.
1.9. It is important that this unit is installed, used and
maintained by professionals, Do not tamper or remove any
safety or warning signs located on the unit.
1.10. The engine operates on gasoline. It is important to
keep in mind this unit can not be run indoors. Carbon
Monoxide has no odor and can be fatal in a short period of
time.
1.11. Gasoline is highly flammable and is capable of causing
a large explosion. Please shut down the machine before
ever adding fuel or oil. When adding fuel or oil make sure it
is done in a well ventilated area. When filling the fuel tank be
sure you always leave enough space for natural fuel
inflation. Make sure to not smoke near fuel supply. Keep
away from all other flames, sparks,etc. Make sure to wipe
all leaked fuel on the unit before starting.
1.12 Take care when attaching your welding leads. Ensure
a solid connection at the lead terminals at all times. Inspect
your welding leads for damage before each use and never
allow them to sit in a damp environment. Avoid dragging
your welding leads, as this may cause the insulation to
become damaged.
1.13 Check the oil level prior to each use by removing the oil
dipstick. Do not operate the unit if it has become overfilled
with oil, as this can affect normal operations. In addition
make sure to change the oil on a regular basis.
1.14Refrain from using the air compressor when welding.
Also, it is recommended that you disconnect all sources
from the generator as well when welding.
Indice
Altri manuali Neilsen Generatore portatile
