Neomouv DRIVE Manuale utente

USER MANUAL

DRIVE

THIS MANUAL CONTAINS IMPORTANT

SAFETY AND OPERATING INSTRUCTIONS

Model conforms to safety standards

Product may differ from photos

DRIVE Manual

CONTENTS

1- PRESENTATION................................................................................................................3

2- ADJUSTMENTS/ASSEMBLY:.............................................................................................4

2.1 Adjusting the saddle:.............................................................................................................................. 4

2.1.1 Angle: ............................................................................................................................................. 4

2.1.2 Height:............................................................................................................................................ 4

2.2 Adjusting the handlebars:....................................................................................................................... 5

2.3 Adjusting the brakes:.............................................................................................................................. 6

2.3.1 V-type front brake:......................................................................................................................... 6

2.3.2 Rear type V-brake: ......................................................................................................................... 7

2.4 Rack:........................................................................................................................................................ 7

2.5 Mounting and dismounting the wheels (rear wheels to be handled by a specialist):............................ 8

2.5.1 Front wheel:.................................................................................................................................... 8

1.5.2 Rear wheel:..................................................................................................................................... 9

2.6 Lights:................................................................................................................................................... 10

2 - USING THE E-BIKE:.......................................................................................................11

2.1 Indexed gearshift:................................................................................................................................. 11

2.2 Electronic gear shifting: ....................................................................................................................... 11

2.3 Display and controls:............................................................................................................................ 12

2.4 Electric assistance:................................................................................................................................ 13

2.4.1 Operation:..................................................................................................................................... 13

2.4.2 Performance:................................................................................................................................... 13

2.4.3 Technical specifications of the power-assistance system:............................................................ 14

2.4.4 Starting up the battery: ................................................................................................................. 14

2.4.5 The electric motor: ....................................................................................................................... 14

3 – CHARGING THE BATTERY:............................................................................................15

3.1 NEOMOUV Lithium Ion 36-volt charger............................................................................................ 15

3.1.1 Precautions (safety instructions): ..................................................................................................... 16

3.1.2 Protecting the charger:...................................................................................................................... 16

3.2 Battery .................................................................................................................................................. 17

Recommendations / precautions to take with your battery: ......................................................................... 18

4 - TIPS FOR INCREASING THE BATTERY LIFE PER CHARGE:...........................................19

5 - UPKEEP AND MAINTENANCE:.......................................................................................20

5.1 Upkeep:................................................................................................................................................... 20

5.2 Lubrication: ............................................................................................................................................ 20

5.3 Maintenance: .......................................................................................................................................... 20

6 - SAFETY – RECOMMENDATIONS:...................................................................................21

7 - TECHNICAL DATA..........................................................................................................22

9 - DECLARATION OF CE CONFORMITY .............................................................................22

10 - CERTIFICATE OF CONFORMITY ..................................................................................22

11 - TERMS OF WARRANTY................................................................................................23

DRIVE Manual

1- PRESENTATION

Thank you for choosing a NEOMOUV Electric-Assisted Bicycle (E-Bike)

E-Bike Presentation:

Notes:

•The symbol indicates important advice or essential safety measures. Follow the various instructions.

•Some adjustment and assembly/disassembly operations require special tools and expertise; perform

these only if you have the skills to do so, otherwise consult your authorised dealer or a specialist.

•The symbol indicates the tools you will need to carry out adjustments.

•Your e-bike has a serial number engraved on the frame by the fork.

MAXIMUM LOAD:120 KG.FOR YOUR SAFETY,YOU SHOULD NOT EXCEED THE MAXIMUM LOAD WHEN USING

YOUR BICYCLE.

Battery

Electric motor

Pedal sensor

Display

Rack (max weight

25 kg)

Controller

Serial number

DRIVE Manual

2- ADJUSTMENTS/ASSEMBLY:

2.1 Adjusting the saddle:

6 mm Allen Key

2.1.1 Angle:

Loosen the nut under the saddle.

Adjust the angle of the saddle in order to find your most comfortable position. Tighten the nut, with a

maximum tightening torque of 13 Nm.

2.1.2 Height:

The power-assisted bicycle enables you to opt for a lower saddle position than on a classic bike. With power

assistance, you expend less effort and can be seated in a lower position for improved safety. The required

user (cyclist) height for optimal utilisation of the bike ranges from 1.65 to 1.90 m. So, adjust your saddle

height to the correct sitting position as follows:

Loosen the quick release seat clamp.

Wearing suitable cycling shoes, sit on the saddle, place one of the pedals in the lowest position, rest one heel

on the pedal, and your leg should rest normally on the pedal without being stretched. Raise or lower the

saddle to get the correct height. While pedalling backwards, you should not have to move your hips from side

to side.

Tighten the quick-release clamp.

THE SEAT POST SHOULD NOT BE EXTENDED BEYOND THE ENGRAVED SAFETY MARK (VERTICAL BARS).

The minimum height between the highest point of the saddle and the ground is 85 cm.

Marque de sécurité

Nut

Quick-release clamp

DRIVE Manual

2.2 Adjusting the handlebars:

6 mm Allen Key

For your comfort, the position of your handlebars must be at the same level as the height of your saddle or a

bit higher according to your comfort. Unscrew the Allen screw and adjust your handlebars to the desired

height.

Do the same with the second screw to set the angle of your handlebars, after making your adjustments,

tighten the screws vigorously, with a max. tightening torque of 10 Nm.

THE STEM MUST NOT COME OUT OF THE HEAD TUBE BEYOND THE ENGRAVED MARKINGS (VERTICAL BARS AND

THE INSCRIPTION MINIMUM INSERTION).

After adjusting the angle, tighten the screw by turning it clockwise (max. tightening torque: 10 Nm).

Handlebar angle

adjusting screw

Height adjusting screw

DRIVE Manual

2.3 Adjusting the brakes:

5 mm Allen Key

Screwdriver

2.3.1 V-type front brake:

The front brake is operated by the left handle on the handlebar.

Tighten the nut on the brake handle fully. This adjustment will enable you to compensate later for the natural

slackening of the brake cable.

Loosen the cable clamp and pull the cable until the pads touch the wheel rim. Tighten the cable clamp (pay

particular attention to each end of the tubing which must fit easily into the rigid connectors on the brake

handle and V-Brake).

The pads are in the right position when they are an equal distance from the wheel rim. The final adjustment is

made by tightening the screws on the brake shoes with a screw driver (a distance of about 0.1 to 0.5 mm

from the wheel rim).

The result of your adjustment is correct when the wheel turns freely and stops smoothly.

DRIVE Manual

2.3.2 Rear type V-brake:

The rear brake is operated by the right handle on the handlebar.

As with the front brake (see section 2.3.1), tighten the nut on the brake handle fully. This adjustment will

enable you to compensate later for the natural loosening of the brake cable.

Loosen the cable clamp (see the photos for adjusting the front brake) and pull the cable until the pads are

touching the wheel rim.

Tighten the cable clamp (pay particular attention to each end of the tubing which must fit easily into the rigid

connectors on the brake handle and V-Brake).

The pads are in the right position when they are an equal distance from the wheel rim. The final adjustment is

made by tightening the screws on the brake shoes with a screw driver (a distance of about 0.1 to 0.5 mm

from the wheel rim).

WARNING!IN WET WEATHER OR ON DAMP GROUND,THE BRAKING DISTANCE INCREASES.

2.4 Rack:

DO NOT LOAD RACK BEYOND THE STIPULATED WEIGHT:25 KG.

Any carrying device or other equipment installed by you on your rack (e.g., child seats, other equipment, etc.)

must be compatible with the robustness and build of the bike.

YOU SHOULD PERIODICALLY CHECK THE TIGHTNESS OF THE RACK’S FASTENINGS.THIS TYPE OF RACK IS NOT

DESIGNED TO TOW A TRAILER.

Any alterations made to the rack by the user will at their own risk.

When the rack is loaded, changes in the behaviour of the bicycle must be taken into account (wind stability,

braking distances, changes in direction, etc.). For their safety, the user must be aware of these changes in

operation.

When installing a child seat or panniers, the user must perform a safety check (e.g., hanging straps that are in

danger of catching in the spokes and raise the risk of a fall; check the secureness of the fastenings on the

child seat, the potential trapping of the child's fingers under the saddle, etc.)

The reflector and the rear light must not be covered by the equipment or seat that has been fitted to the rack.

The load on the rack must be evenly distributed on both sides to ensure the stability of the equipment while

riding on public roads.

DRIVE Manual

2.5 Mounting and dismounting the wheels

(rear wheels to be handled by a

specialist):

2.5.1 Front wheel:

15 mm open-ended spanner

Dismounting the front wheel:

You must first disconnect the motor wire (right-hand side of the wheel).

Then, loosen the V-brake’s cable clamp to release the pads and enable the removal of the wheel.

Undo the cap nuts on each side and remove the washers.

Raise the bike and tap lightly on the top of the tyre to remove the wheel.

Mounting the front wheel:

Reposition the washers on the wheel axle. Raise the bike and insert the wheel axle into the base of the

opening of the fork ends.

Check the position of the washers as well as the centring of the wheel. Screw in the wheel nuts. Alternately

and progressively tighten the wheel nuts on each side (max. tightening torque 25 Nm).

If the wheel is not centred, loosen the nuts and perform the operation again.

DO NOT ADJUST THE LOCKNUTS,YOU MAY DAMAGE THE BEARINGS.

Adjust your brake again (see section 2.3).

NB: the connector is equipped with a keyed connection. Place the two pins so that they are facing each other

to reconnect the motor correctly.

Position the two pins

correctly to reconnect

the motor plug

DRIVE Manual

1.5.2 Rear wheel:

THIS OPERATION SHOULD BE CARRIED OUT BY A PROFESSIONAL;HOWEVER,HERE IS THE PROCEDURE TO

Dismounting the rear wheel from the back of a universal joint:

1) Unscrew the 2 screws on the pinion cover situated at the back of the universal joint using a

cross-headed screwdriver

(photo 1)

2) Position the lever at 1st gear.

3) Pull the derailleur cable out of the black mouse by pulling it down

(photo 2)

4) Press on the black Nexus selector with a small screwdriver and rotate the screwdriver to the left

to release the cable nut and pull it out

(photo 3)

5) Then, loosen the V-brake’s cable clamp to release the pads and enable the removal of the

wheel.

6) Using a 15 mm spanner, loosen the wheel nuts.

7) Remove the flat washer from its groove and pull the wheel backwards.

Mounting the rear wheel to the back of a universal joint:

1) Put the wheel back into position while following the order of the washers. The small one goes

on the inside and flat washer goes on the outside.

2) Tighten the 15 mm nuts while checking the centring of the wheel.

3) Reposition the derailleur cable using a screwdriver.

4) Check the adjustment of the Nexus system.

5) Try the bike.

6) If the gears slip underfoot, adjust the setting using the thumbwheel on the lever.

DRIVE Manual

2.6 Lights:

Your bike is equipped with:

Fixed front and rear lights. The front and rear lights are powered by the battery. The lights are

switched on by pressing and holding the +button, which will switch the display's backlighting and the front

and rear lights on and off.

ALWAYS KEEP YOUR LIGHTS CLEAN AND IN GOOD CONDITION.

LIGHTS ARE OBLIGATORY AT NIGHT.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali neomouv Bicicletta

neomouv

neomouv PLIMOA Manuale utente

neomouv

neomouv CARLINA Manuale utente

neomouv

neomouv Montana Brose Manuale utente

neomouv

neomouv ENARA Manuale utente

neomouv

neomouv CROONY Manuale utente

neomouv

neomouv Bricks Manuale utente

neomouv

neomouv PLIMOA Manuale utente

neomouv

neomouv FACELIA N3 Manuale utente

neomouv

neomouv PLIMOA Manuale utente

neomouv

neomouv FURTIVOO Manuale utente

neomouv

neomouv CRONOS Manuale utente

Manuali Bicicletta popolari di altre marche

RAMBO

RAMBO R1000X2M-FF-BFD Manuale utente

Vermeiren

Vermeiren SAFARI Manuale utente

Velec

Velec A2/36V Manuale utente

Coswheel

Coswheel A-ONE Manuale utente

Betzold

Betzold 97869 Manuale utente

Cervélo

Cervélo S3 2019 Manuale utente

Tenways

Tenways AGO X Manuale utente

Festo

Festo EGSC-BS-KF Manuale elenco delle parti

Gio Electric

Gio Electric H1 Volt Manuale utente

GOGOBEST

GOGOBEST GM30 Manuale utente

DAHON

DAHON CIAO - 2009 Manuale utente

Aprimatic

Aprimatic ONDA 500 Guida rapida

MV Agusta

MV Agusta Lucky Explorer GRAVEL Manuale di istruzioni

Greyp

Greyp G6 Series Manuale utente

Babboe

Babboe Carve-E Manuale utente

Huka

Huka orthros Manuale utente

Xtracycle

Xtracycle Stoker 2021 Manuale utente

APRILIA

APRILIA DORSODURO 750 ABS 2015 Manuale utente

neomouv DRIVE Manuale utente

Manuali Bicicletta popolari di altre marche