Ness DS-K2601 Manuale utente

DS-K2600 Series Access Controller

User Manual

Ness V1.0

Access Controller·

··

·User Manual

User Manual

This manual is applied for Ness Australian Version access controllers..

Product Name Serials

Access

Controller

DS-K2601 Serials Access Controller

DS-K2602 Serials Access Controller

DS-K2604 Serials Access Controller

It includes instructions on how to use the Product. The software embodied in the Product is

governed by the user license agreement covering that Product.

About this Manual

This Manual is subject to domestic and international copyright protection. Hangzhou Hikvision

Digital Technology Co., td. (“Hikvision”) reserves all rights to this manual. This manual cannot be

reproduced, changed, translated, or distributed, partially or wholly, by any means, without the

prior written permission of Hikvision.

Modifications have been made to this manual by Ness Corporation Australia to suit the Australian

market and to assist in Ness customers understanding the product easier.

Trademarks

and other Hikvision marks are the property of Hikvision and are registered

trademarks or the subject of applications for the same by Hikvision and/or its affiliates. Other

trademarks mentioned in this manual are the properties of their respective owners. No right of

license is given to use such trademarks without express permission.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APP ICAB E AW, HIKVISION MAKES NO WARRANTIES,

EXPRESS OR IMP IED, INC UDING WITHOUT IMITATION THE IMP IED WARRANTIES OF

MERCHANTABI ITY AND FITNESS FOR A PARTICU AR PURPOSE, REGARDING THIS MANUA .

HIKVISION DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE

USE OF THE MANUA , OR THE CORRECTNESS, ACCURACY, OR RE IABI ITY OF INFORMATION

CONTAINED HEREIN. YOUR USE OF THIS MANUA AND ANY RE IANCE ON THIS MANUA SHA BE

WHO Y AT YOUR OWN RISK AND RESPONSIBI ITY.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHA BE WHO Y

AT YOUR OWN RISKS. OUR COMPANY SHA NOT TAKE ANY RESPONSIBI ITIES FOR ABNORMA

OPERATION, PRIVACY EAKAGE OR OTHER DAMAGES RESU TING FROM CYBER ATTACK, HACKER

ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, OUR COMPANY

WI PROVIDE TIME Y TECHNICA SUPPORT IF REQUIRED.

SURVEI ANCE AWS VARY BY JURISDICTION. P EASE CHECK A RE EVANT AWS IN YOUR

JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS

THE APP ICAB E AW. OUR COMPANY SHA NOT BE IAB E IN THE EVENT THAT THIS PRODUCT IS

USED WITH I EGITIMATE PURPOSES.

IN THE EVENT OF ANY CONF ICTS BETWEEN THIS MANUA AND THE APP ICAB E AW, THE ATER

PREVAI S.

Support

Should you have any questions, please do not hesitate to contact your local dealer.

Access Controller·

··

·User Manual

Regulatory In ormation

FCC In ormation

Please take attention that changes or modification not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

FCC compliance: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more

of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

—Consult the dealer or an experienced radio/TV technician for help.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operation.

EU Con ormity Statement

This product and - if applicable - the supplied accessories too are marked with "CE"

and comply therefore with the applicable harmonized European standards listed

under the R&TTE Directive 1999/5/EC, the EMC Directive 2014/30/EU, the VD

Directive 2014/35/EU, the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed

of as unsorted municipal waste in the European Union. For proper recycling, return

this product to your local supplier upon the purchase of equivalent new equipment,

or dispose of it at designated collection points. For more information see:

www.recyclethis.info.

2006/66/EC (battery directive): This product contains a battery that cannot be

disposed of as unsorted municipal waste in the European Union. See the product

documentation for specific battery information. The battery is marked with this

symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury

(Hg). For proper recycling, return the battery to your supplier or to a designated

collection point. For more information see: www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.

Access Controller·

··

·User Manual

iii

Preventive and Cautionary Tips

Before connecting and operating your device, please be advised of the following tips:

•

Ensure unit is installed in a well-ventilated, dust-free environment.

•

Keep all liquids away from the device.

•

Ensure environmental conditions meet factory specifications.

•

Ensure unit is properly secured to a rack or shelf. Major shocks or jolts to the unit as a result of

dropping it may cause damage to the sensitive electronics within the unit.

•

Use the device in conjunction with an UPS if possible.

•

Power down the unit before connecting and disconnecting accessories and peripherals.

•

A factory recommended HDD should be used for this device.

Improper use or replacement of the battery may result in hazard of explosion. Replace with the

same or equivalent type only. Dispose of used batteries according to the instructions provided by

the manufacturer.

Access Controller·

··

·User Manual

Sa ety Instruction

WARNING

Please note: There is high voltage (240VAC) inside the housing o the controller. Extreme caution

should be taken and only installed and serviced by licensed trained installers.

These instructions are intended to ensure that user can use the product correctly to avoid danger

or property loss.

The precaution measure is divided into Warnings and Cautions:

Warnings: Neglecting any of the warnings may cause serious injury or death.

Cautions: Neglecting any of the cautions may cause injury or equipment damage.

Warnings

All the electronic operation should be strictly compliance with the electrical safety regulations,

fire prevention regulations and other related regulations in your local region.

Please use the power adapter, which is provided by normal company. The power consumption

cannot be less than the required value.

Do not connect several devices to one power adapter as adapter overload may cause over-heat

or fire hazard.

Please make sure that the power has been disconnected before you wire, install or dismantle

the device.

When the product is installed on wall or ceiling, the device shall be firmly fixed.

If smoke, odours or noise rise from the device, turn off the power at once and unplug the power

cable, and then please contact the service centre.

If the product does not work properly, please contact your dealer or the nearest service centre.

Never attempt to disassemble the device yourself. (We shall not assume any responsibility for

problems caused by unauthorized repair or maintenance.)

Warnings Follow these

safeguards to prevent

serious injury or death.

Cautions Follow these

precautions to prevent

potential injury or material

damage.

Access Controller·

··

·User Manual

Cautions

Do not drop the device or subject it to physical shock, and do not expose it to high

electromagnetism radiation. Avoid the equipment installation on vibrations surface or places

subject to shock (ignorance can cause equipment damage).

Do not place the device in extremely hot (refer to the specification of the device for the detailed

operating temperature), cold, dusty or damp locations, and do not expose it to high

electromagnetic radiation. The appropriate operation temperature is 0℃ to +45℃, and the

storage temperature should be -10℃ to +55℃.

The device cover for indoor use shall be kept from rain and moisture.

Exposing the equipment to direct sun light, low ventilation or heat source such as heater or

radiator is forbidden (ignorance can cause fire danger).

Do not aim the device at the sun or extra bright places. A blooming or smear may occur

otherwise (which is not a malfunction however), and affecting the endurance of sensor at the

same time.

Please use the provided glove when open up the device cover, avoid direct contact with the

device cover, because the acidic sweat of the fingers may erode the surface coating of the device

cover.

Please use a soft and dry cloth when clean inside and outside surfaces of the device cover, do

not use alkaline detergents.

Please keep all wrappers after unpack them for future use. In case of any failure occurred, you

need to return the device to the factory with the original wrapper. Transportation without the

original wrapper may result in damage on the device and lead to additional costs.

Improper use or replacement of the battery may result in hazard of explosion. Replace with the

same or equivalent type only. Dispose of used batteries according to the instructions provided by

the battery manufacturer.



Warning

Please note: There is high voltage (240VAC) inside the housing o the controller. Extreme caution

should be taken and only installed and serviced by licensed trained installers.

Access Controller·

··

·User Manual

Table o Contents

Chapter 1

Product Description ................................................................................................. 1

1.1

Overview .............................................................................................................................. 1

1.2

Main Features ...................................................................................................................... 1

Chapter 2

Component Description ........................................................................................... 3

Chapter 3

Terminal Connection ................................................................................................ 4

3.1

Terminal Description ............................................................................................................ 4

3.1.1

DS-K2601Terminal Description......................................................................................... 4

3.1.2

DS-K2602Terminal Description ......................................................................................... 6

3.1.3

DS-K2604 Terminal Description ........................................................................................ 9

Chapter 4

Card Reader Installation ......................................................................................... 13

4.1

External Terminal ............................................................................................................... 13

4.1.1

DS-K2601 External Terminals ......................................................................................... 13

4.1.2

DS-K2602 External Terminals ......................................................................................... 13

4.1.3

DS-K2604 External Terminals ......................................................................................... 13

4.2

Card Reader Installation ..................................................................................................... 14

4.2.1

The Connection of Wiegand Card Reader ...................................................................... 14

4.2.2

RS485 Card Reader Connection ..................................................................................... 15

4.3

Installing E- ock .................................................................................................................. 16

4.3.1

Installation of Cathode ock (Power to Unlock) ............................................................. 16

4.3.2

Installation of Anode ock (Power to ock) .................................................................... 16

4.4

Connecting the External Alarm Device .............................................................................. 17

4.5

Door Button Wiring Diagram ............................................................................................. 17

4.6

The Connection of Magnetics Detection (Door Monitoring) ............................................. 18

4.7

Connecting Power Supply .................................................................................................. 18

4.8

Arming Region Input Terminal ........................................................................................... 19

4.8.1

Connecting Normally Open Detector ............................................................................. 19

4.8.2

Connecting Normally Closed Detector ........................................................................... 19

4.9

Fire Alarm Module Wiring ................................................................................................. 20

Chapter 5

Settings ................................................................................................................. 21

5.1

Initializing the Hardware .................................................................................................... 21

5.2

Relay Input NO/NC ............................................................................................................. 21

5.2.1

ock Relay Output .......................................................................................................... 21

5.2.2

Alarm Relay Output Status ............................................................................................. 22

Chapter 6

Activating the Access Control Terminal ................................................................... 24

Access Controller·

··

·User Manual

vii

6.1

Activating via SADP Software ............................................................................................. 24

6.2

Activating via Client Software ............................................................................................ 25

Chapter 7

Client Operation .................................................................................................... 28

7.1

Function Module ................................................................................................................ 28

7.2

User Registration and ogin ............................................................................................... 31

7.3

System Configuration ......................................................................................................... 33

7.4

Access Control Management ............................................................................................. 33

7.4.1

Adding Access Control Device ........................................................................................ 35

7.4.2

Viewing Device Status .................................................................................................... 39

7.4.3

Editing Basic Information ............................................................................................... 40

7.4.4

Network Settings ............................................................................................................ 41

7.4.6

RS-485 Settings ............................................................................................................... 41

7.4.7

Wiegand Settings ........................................................................................................... 42

7.4.8

M1 Card Encryption ....................................................................................................... 42

7.4.9

Remote Configuration .................................................................................................... 44

7.5

Person and Card Management .......................................................................................... 48

7.5.1

Organization Management ............................................................................................ 48

7.5.2

Person Management ...................................................................................................... 50

7.6

Schedule and Template ...................................................................................................... 64

7.6.1

Week Schedule ............................................................................................................... 64

7.6.2

Holiday Group ................................................................................................................ 67

7.6.3

Template ......................................................................................................................... 67

7.7

Permission Configuration ................................................................................................... 72

7.7.1

Adding Permission .......................................................................................................... 73

7.7.2

Applying Permission ....................................................................................................... 74

7.8

Advanced Functions ........................................................................................................... 75

7.8.1

Access Control Parameters ............................................................................................. 75

7.8.1.1

Status Duration Configuration (Auto Unlock of Doors) .................................................. 77

7.8.2

Card Reader Authentication ........................................................................................... 78

7.8.3

Multiple Authentication ................................................................................................. 84

7.8.4

Open Door with First Card ............................................................................................. 86

7.8.5

Anti-Passing Back ........................................................................................................... 88

7.8.6

Cross-Controller Anti-passing Back ................................................................................ 89

7.8.7

Multi-door Interlocking .................................................................................................. 92

7.8.8

Authentication Password ............................................................................................... 93

7.8.9

Custom Wiegand ............................................................................................................ 94

Access Controller·

··

·User Manual

viii

7.9

Searching Access Control Event ......................................................................................... 97

7.10

Access Control Event Configuration ................................................................................... 98

7.10.1

Access Control Event inkage ..................................................................................... 99

7.10.2

Access Control Alarm Input inkage ......................................................................... 100

7.10.3

Event Card inkage ................................................................................................... 102

7.10.4

Cross-Device inkage ................................................................................................ 103

7.11

Door Status Management ................................................................................................ 105

7.11.1

Access Control Group Management ........................................................................ 107

7.11.2

Anti-control the Access Control Point (Door) ........................................................... 109

7.11.4

Real-time Card Swiping Record ................................................................................ 115

7.11.5

Real-time Access Control Alarm ............................................................................... 115

7.12

Arming Control ................................................................................................................. 117

Appendix A

Sound Prompt and Indicator ................................................................................ 118

Appendix B

Custom Wiegand Rule Descriptions ...................................................................... 119

Access Controller·

··

·User Manual

Chapter 1Product Description

1.1 Overview

DS-K2600 is a powerful and stable access controller, using the logical architecture design. DS-K2600

is designed with TCP/IP network interface and its signal processed with special encryption and can

be run offline. Anti-tampering function is also supported.

1.2 Main Features

The access controller is equipped with 32-bit high-speed processor

Supports TCP/IP network communication. The communication data is specially encrypted to

relieve the concern of privacy leak

Support recognition and storage of card number with maximum length of 20

The access controller can store 100,000 legal cards (97,000 normal cards and 3,000 visitor cards)

and 300,000 card swiping records

Supports multi-door interlock function, anti-passback function, multi-card function, first card

open function, super card and super password function, M1 card encryption, online upgrade

function and remote control of the doors

Supports tamper-proof alarm for card reader, alarm for door not secured, force opening door

alarm, alarm for door opening timeout, duress card and code alarm, blacklist alarm and alarm

for illegal card swiping attempts reaching the limit

The alarm input of controller supports short circuit protection function and cut-proof function

Multiple event upload methods: channel, center group, and listening

50 event and card linkages

IP address conflict detection

Cross-controller anti-passing back function (For cross-controller anti-passing back based on

card, wire the card reader with RS-485. For cross-controller anti-passing back based on network,

connect the server and device properly. Up to 5000 cards’ swiping records can be stored in the

selected server.) and inner-device anti-pass-back function

Supports RS485 interface and Wiegand interface for accessing card reader. RS485 interface

adopts dual-interface design and supports loop breakpoint detection and redundancy function;

Wiegand interface supports W26, W34 and is seamlessly compatible with third-party card

reader with Wiegand interface

Supports various card types as normal/ disabled/ blacklist/ patrol/ guest/ duress/ super card,

etc.

Various indicators to show different status

Supports time synchronization via NTP, manual or automatic method

Supports record storage function when it is offline and insufficient storage space storage alarm

function

The access controller has backup battery design, watchdog design and tamper-proof function

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Ness Controllori di accesso IP

Ness

Ness 101-090 Manuale utente

Ness

Ness IDTeck FGR006 Manuale utente

Ness

Ness M1KAM Manuale utente

Ness

Ness IDTECK iCON100 Manuale utente

Ness

Ness 101-091 Manuale di istruzioni

Ness

Ness VIRDI AC-1000RF Manuale utente

Ness

Ness HIKVISION DS-K2600 Series Manuale utente

Ness

Ness ID Teck 505R Manuale utente

Manuali Controllori di accesso IP popolari di altre marche

ZKTeco

ZKTeco SpeedFace-V5L Manuale utente

Jantar

Jantar REX A-1-9 Manuale utente

2N Access Unit Foglio di istruzioni

Kedacom

Kedacom KSCA120 Series Manuale utente

H3C

H3C WX2880X Manuale utente

G4S

G4S S870-EX Guida

PRASTEL

PRASTEL M2000PE Manuale utente

Allegion

Allegion interflex IF-281 Cylinder Manuale utente

TECOM

TECOM TS1067E Manuale utente

Fermax

Fermax Memokey 100C Guida utente

Fermax

Fermax CITYLINE MEMOKEY Manuale di istruzioni

Software House

Software House iSTAR Pro 2U RM Manuale di istruzioni

AKCP

AKCP SP+ Manuale utente

Bpt

Bpt HNA/102 Manuale utente

Civintec

Civintec CV9601T-T-1F Manuale utente

BioMax

BioMax N-X90W Manuale utente

ZKTeco

ZKTeco OP-200 Manuale utente

FingerTec

FingerTec s-Kadex Manuale utente