5
PROGRAMMING STEPS
1
1
ON
2 3 4 5
The LED will flash fast to indicate program
mode.
2
1
ON
2 3 4 5
If the selected code slot is blank the LED
will remain flashing fast. If the code slot
already has a device programmed the LED
will be ON. The existing radio device must be
erased before programming a new one.
See How To Erase a Code.
3
-
-
If the device being programmed already
exists in another code slot the LED will triple
flash on receiving the learn signals. If so the
device does not need to be programmed.
To program more devices repeat steps 1
and 2 for the remaining code slots.
4
The LED will flash slowly indicating normal
operating mode.
5
HOW TO ERASE A CODE
1
2
The LED will be ON indicating the slot is
programmed.
3
The LED will flash fast indicating the code
slot is blank.
PROGRAMMING / LEARNING TRANSMITTERS
