NetComm NB6Plus4 Manuale utente

NB6Plus4 - 1

This User Guide provides basic instructions for connecting your NB6Plus4 to an Apple

Macintosh computer and to the Internet.

1. Ethernet Installation

2. Modem Set-up Before you can use this Quick Start Guide, you must have already

established an ADSL service with your Internet Service Provider (ISP).

These instructions provide a basic set-up conﬁguration that should get home or small ofﬁce

Macs up and running. This will be sufﬁcient for most users. If you need to perform more

advanced conﬁgurations, please see the comprehensive User Guide on the supplied CD-

ROM for additional instructions.

NOTE: NetComm Technical Support for this product only covers the essential installation and features outlined in this Quick Start

Guide. For detailed information regarding the advanced features of this product, please see the conﬁguring sections in the

NB6Plus4 User Guide on the supplied CD-ROM.

Connecting your NB6Plus4

The NetComm NB6Plus4 Modem can be connected directly to your Mac via an Ethernet

interface. In addition, you can use your Mac’s Airport to connect to the NB6Plus4 wirelessly.

Warning: Before you begin, turn the power off for all devices. These include your Mac and your NB6Plus4 Modem.

Start Here

ADSL2+ Router

Mac User Guide

ADSL2+ Router

Mac User Guide

2 - NB6Plus4

Step 1 – Install the Hardware

To connect your modem using the Ethernet cable, follow these step-by-step instructions:

1. Connect the ADSL cable.

Connect one end of the telephone cable provided to the port labeled ADSL on the rear

panel of your NB6Plus4 Modem. Connect the other end to your wall phone jack.

2. Connect the Ethernet cable.

Connect one end of the Ethernet cable provided to the Ethernet port on your Mac and the

other end of the cable to the Ethernet port of your NB6Plus4 ADSL Modem.

3. Attach the power connector.

Connect the AC power adapter to the Power connector on the back of the NB6Plus4 and

plug in the adapter into a wall outlet or power strip.

4. Switch on the power. Your NB6Plus4 will start up. Turn on your Mac.

Hardware

Installation

ADSL2+ Router

Mac User Guide

NB6Plus4 - 3

Step 2 – Set up your Mac

This is how to conﬁgure your Mac to work with your NB6Plus4 ADSL Modem. Mac OS

10.2.2

1. From the Apple menu, select System Preferences.

2. The Systems Preferences window opens.

Mac

Set-up

ADSL2+ Router

Mac User Guide

4 - NB6Plus4

3. In the Systems Preferences window, locate the “Internet and Network” heading and

click once on the Network icon. The Network window opens.

4. If you want to use this Mac in more than place (perhaps at home as well as at your

workplace) or on more than one network, you can achieve this easily by setting up

a Location for each place or network. Swapping Locations then becomes a simple

matter of selecting the appropriate Location. If you wish to do this, you will need to

click on the “Location” pop-up menu and select “New Location…”. You will be asked

to name your new location.

5. Give your New Location a meaningful name and click OK. Make sure that the

Location you have just created is displayed in the Location pop-up menu.

6. If you do not wish to set up more than one Location, make sure that the Location

pop-upmenu is set to “Automatic”.

7. Click on the “Show” pop-up menu and select “Built in Ethernet”. Click on the TCP/

IP tab.The TCP/IP settings will be displayed. Click on the “Conﬁgure” pop-up menu

Mac

Set-up

(cont)

ADSL2+ Router

Mac User Guide

NB6Plus4 - 5

(“Conﬁgure iPV4” if you’re using Mac OS 10.3) and select “Using DHCP”. Click on

Apply Now to save the changes.

Your dialog box should now look like this:

8. If your Mac does not accept an IP address from the DHCP server in your NB6Plus4

and the IP address ﬁeld remains blank, try selecting “Using DHCP with manual

address” from the “Conﬁgure” pop-up menu (“Conﬁgure iPV4” if you’re using Mac

OS 10.3) and entering 192.168.1.3 in the “IP address” ﬁeld.

Mac

Set-up

(cont)

ADSL2+ Router

Mac User Guide

6 - NB6Plus4

9. Click on the “Show” pop-up menu and select “Network Status”. Check to see that

the bullet alongside “Built-in Ethernet” is green.

10. Close the Network window by clicking the red close button (System 10.3) or select

“Quit System Preferences” under the “System Preferences” menu (System 10.2 or

earlier).

Mac

Set-up

(cont)

ADSL2+ Router

Mac User Guide

NB6Plus4 - 7

Modem

Set-up

To conﬁgure your NB6Plus4 ADSL Modem, follow the steps below:

1. Open a web browser such as Safari or Internet Explorer.

2. In the Location Bar, type 192.168.1.1 and press Enter.

3. Enter the username and password. The default username is “admin”. The default

password is “admin”. Click on OK.

4. The NB6Plus4 conﬁguration page will be displayed. Enter the username and

password that your ISP has provided and click on “connect”.

5. After a few seconds, router will restart and lights will get stable. Once connected, PPP

light on front panel of the modem will come on. You will see this screen on your Mac.

ADSL2+ Router

Mac User Guide

8 - NB6Plus4

6. You have now completed the set-up which will be sufﬁcient for most uses. You

should now be able to access the Internet by selecting one of your Favorites or

Bookmarks or by entering a URL in the Location Bar.

9. You may need to change the settings in Mail, Outlook Express or whatever email

application you use. Your ISP will supply these settings.

10. If you need to perform more advanced conﬁgurations, please see the comprehensive

User Guide on the supplied CD-ROM for additional instructions.

Modem

Set-up

(cont)

Altri manuali per NB6Plus4

Indice

Altri manuali NetComm Router di rete

NetComm

NetComm NWL-12-01 Manuale utente

NetComm

NetComm NTC-6200-01 Manuale utente

NetComm

NetComm NB5PLUS4W Guida rapida

NetComm

NetComm Roadster V.92 AM5698 Manuale utente

NetComm

NetComm NB6PLUS4WN Manuale utente

NetComm

NetComm 3G27WV-R Manuale utente

NetComm

NetComm 3G9WB Manuale di istruzioni

NetComm

NetComm N300 GATEWAY SERIES Manuale utente

NetComm

NetComm NB604 Manuale utente

NetComm

NetComm 3GM1WN Manuale utente

NetComm

NetComm NTC-6000 SERIES Manuale utente

NetComm

NetComm NB6PLUS4W Manuale utente

NetComm

NetComm NF10W Manuale utente

NetComm

NetComm NTC-140W-02 Manuale utente

NetComm

NetComm NTC-6200 Manuale utente

NetComm

NetComm NP2005HS Manuale utente

NetComm

NetComm LIBERTY SERIES Manuale utente

NetComm

NetComm 3GT1Wn Manuale utente

NetComm

NetComm NB9WMAXXn Manuale utente

NetComm

NetComm NB1300 Istruzioni di installazione e manutenzione

NetComm

NetComm NF4V Manuale utente

NetComm

NetComm 3G42W-M Manuale utente

NetComm

NetComm V300 Manuale utente

NetComm

NetComm NTC-6000 SERIES Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza