NetComm NF10W Manuale utente
QUICK START GUIDE
NetCommWireless
NF10W
VDSL / ADSL
WiFi Modem Router
WELCOME
Thank you for choosing a NetComm Wireless NF10W VDSL/ADSL WiFi Modem Router. This
guide will help you set up, connect and congure your device quickly and easily.
PACKAGE CONTENTS
This package includes:
1 x NetComm Wireless NF10W VDSL/ADSL WiFi Modem Router
1 x Quick start guide
1 x 1.5m RJ-45 Ethernet cable
1 x WiFi security card
1 x Warranty card
1 x Power supply (12V/1.5A)
1 x RJ11 Telephone cable
NetCommWireless
NetCommWireless
NetCommWireless
NetCommWireless
NetCommWireless
NetCommWireless
NetCommWireless
2.4GHz - 2.4GHz -
VDSL/ADSL WiFi
Modem Router
WiFi security card
1.5m RJ-45
Ethernet cable
VDSL / ADSL WiFi Modem Router - NF10W
PRE-REQUISITES
If you are using a voice service on the same line as the DSL service, you will need a DSL line
lter for each handset on the line. If you have a Naked DSL service, line lters are not required.
INSTALLING THE DEVICE
1. Connect the supplied RJ11 cable to the “modem” port of your DSL line lter and then
connect the other end to the DSL port on the back of the NF10W. Connect the DSL line
lter (not included) to the wall socket and then connect your handset to the “phone” port
of the lter. If you have a Naked DSL service, simply connect the included RJ11 cable
from the DSL port of the NF10W to the wall socket.
2. Connect the supplied RJ45 Ethernet cable from one of the yellow LAN ports (1-4) on the
back of the NF10W to your computer.
3. Connect the included power adapter to the power jack of the NF10W and then plug it into
an available wall socket. Press the ON/OFF button to power the router on. The Power light
illuminates in red. When the NF10W has nished booting up, the Power light turns green.
LOGGING IN TO THE WEB INTERFACE
1. Open a web browser (such as Internet Explorer®, Mozilla Firefox® or Google Chrome™),
type http://192.168.20.1 into the address bar and press Enter.
2. At the login screen, type admin into both the Username and the Password elds and click
OK.
CONFIGURING THE DEVICE FOR USE WITH AN
INTERNET SERVICE
Click on the Basic Setup menu item on the left side of the screen.
ADSL
a. Select ADSL and click the Next button.
b. Select either the PPPoE or PPPoA for your internet connection as specied by your
Internet Service Provider (ISP). Click the Next button.
VDSL / ADSL WiFi Modem Router - NF10W
c. In the User ID and Password elds, enter the username and password assigned to you
by your Internet Service Provider (ISP). Click the Finish button.
The account settings are saved and the NF10W connects to the internet.
VDSL
a. Select VDSL and click the Next button.
b. Select the WAN mode for your internet connection as specied by your Internet Service
Provider (ISP). Click the Next button.
For New Zealand customers, the requirement for VDSL is VLAN tag 10, if you are not sure of
the tagging requirement for your connection, please contact your ISP.
In the User ID and Password elds, enter the username and password assigned to you by
your Internet Service Provider (ISP).
Click the Finish button when you have entered the required details.
Ethernet WAN
a. Connect an RJ45 Ethernet cable to the WAN port on the NF10W. Connect the other end
of the cable to your WAN service.
b. Select Ethernet WAN then click the Next button.
c. Select the WAN mode for your internet connection as specied by your Internet Service
Provider (ISP). Click the Next button.
PPP over Ethernet (PPPoE)
In the User ID and Password elds, enter the username and password assigned to you
by your Internet Service Provider (ISP). Click the Finish button when you have entered the
required details.
VDSL / ADSL WiFi Modem Router - NF10W
IP over Ethernet (IPoE)
If your ISP has supplied a static IP address, select Use the following Static IP address
and enter the details, otherwise select Obtain an IP address automatically. Click the Next
button.
The settings are displayed in a summary. Click Apply/Save to save them.
CONNECTING WIRELESS DEVICES
The default settings of the router have the wireless function enabled so there is no
conguration necessary in order to use the wireless function, simply connect to the SSID
(network name) listed on the WiFi security card. When prompted, enter the password that is
also printed on the card.
2.4GHz - 2.4GHz -
QSG-00063 rev1
CHANGING THE WIRELESS PASSWORD
If you would like to change the wireless password to something easier to remember, follow
these steps.
1. Select the Wireless menu from the left side of the screen, then select the Security option
below it. The Wireless Security page is displayed.
2. In the WPA/WAPI passphrase eld, enter the desired password to use for the wireless
network. When choosing a password, try to ensure that it
• is unique;
• is sufciently long (at least 8 characters in length);
• uses a mix of letters, numbers and symbols;
• does not contain any personal information or common words.
3. Click the Apply/Save button.
Altri manuali per NF10W
2
Indice
Altri manuali NetComm Router wireless
NetComm
NetComm NB14WN Manuale utente
NetComm
NetComm NB16DG Manuale utente
NetComm
NetComm N300 GATEWAY SERIES Manuale utente
NetComm
NetComm NTC-30WV Manuale utente
NetComm
NetComm NTC-402 Manuale utente
NetComm
NetComm N3G001W Manuale utente
NetComm
NetComm NF5 Manuale utente
NetComm
NetComm DYNALINK RTA1320V6 Manuale utente
NetComm
NetComm NB7 Manuale utente
NetComm
NetComm LIBERTY SERIES Manuale utente
NetComm
NetComm N300 NP804n Manuale utente
NetComm
NetComm N300 GATEWAY SERIES Manuale utente
NetComm
NetComm NB9WMAXX Manuale utente
NetComm
NetComm YML-O-3G19W Manuale utente
NetComm
NetComm Dynalink 3G8WV Manuale utente
NetComm
NetComm T1 Manuale utente
NetComm
NetComm NB504 Manuale utente
NetComm
NetComm FIBRE NF3ADV Manuale utente
NetComm
NetComm MyWay 3G8WV Manuale utente
NetComm
NetComm NTC-5908 Manuale utente
