NetGain Motors ImPulse 8 Manuale utente
Owner's Manual
for
and
Please record your motor serial number and date of purchase on this page.
Motor Serial Number: _________________________________________
Date of Purchase:_____________________________________________
Purchased From:______________________________________________
Motor Model:
OT ER
Waiver Of Liability & Indemnification
It is the responsibility of the purchaser to be familiar with the safe and correct installation and operation for all equipment.
he seller has no opportunity to supervise the application, installation, or maintenance of the components used, nor to
supervise and inspect the replacement of the motors used. herefore, the installer agrees that all motors will be used solely at
the purchaser’s risk. he purchaser will indemnify and hold the seller, its owners, and its employees or representatives free
and harmless from all loss, liability, or damage resulting from the alleged failure or defect of any project built using
components purchased from the seller.
April 18, 2017
RE: Your new NetGain Motors, Inc. DC Motor
It is with great pleasure that everyone at NetGain Motors, Inc.. welcomes you to the
AmP
™
and
WarP
™
motors
owner's family! We would also like to “Thank You” for your purchase.
Since electric motors are different from internal combustion engines, this Owner's Manual is
being sent to you to provide information on running and caring for your new motor. Please read
it carefully and follow the suggestions that will provide for years of great performance from
your new motor.
This Owner's Manual contains the new motor warranty, our dealer's safety information sheet,
wiring tips bulletin, heat and rpm protection bulletin, care and maintenance information sheet,
bench test procedure bulletin and other information of interest and importance. If you purchased
an AmP Motor your motor warranty will be provided by the Advanced Motors & Drives
Warranty. All other motors are covered by Warfield Electric Company, Inc.
There is also a substantial amount of content that may be obtained at our website:
http://www.go-ev.com
Along with your dealer, we definitely want to help make your EV project a success, so please
let us know if you have any questions about your motor, safety, wiring or anything else. We'll
help you or find resources that can help.
Again, we thank you for your motor purchase – we wish you success in your EV project!
WarP
™
Motors – TORQUE ABOUT IT!
George amstra
NetGain Motors, Inc.
President
WarP
™ Motors
WARFIELD NEW MO OR WARRAN Y *
WARFIELD ELECTRIC COMPANY, INC. (The Company), warrants that new motors sold by it are
merchantable and free of defects in material and workmanship at the time that they are shipped from the
company’s factory.
The company makes no warranty with respect to the new motors other than the warranty stated above. All
implied warranties of merchantability and all express and implied warranties of any other kind are hereby
excluded.
The company will repair or, at its option, replace any part of any new motor sold by it that fails to conform to the
warranty stated above, provided Warfield Electric Company, Inc. (factory) is contacted for a Repair
Authorization Number (RA#) and such part is returned to the company’s factory or to a factory authorized
service station, transportation charges prepaid, within the warranty period specified below:
NEW MOTOR WARRANTY extends for a period of one year or 2000 hours of
equipment operation, whichever first occurs, following the date of delivery of such
equipment into which the motor has been installed, but warranty coverage will not
exceed a period of two years from the date the motor was shipped from the company’s
factory. Proof of equipment installation date and equipment hour meter reading must be
provided.
LIMITATION OF LIABILITY
The company’s liability, whether in contract or in tort or under any other legal theory, arising out of warranties,
representations, instruction or warnings (or any lack or inadequacy thereof), deficiencies, failures or defects of
any kind or from any cause shall be limited exclusively to repairing or replacing parts (during normal business
hours) under the provisions stated above. All liability for damages, including, but not limited to, those expenses,
or injury to business credit, reputation or financial standing is hereby excluded.
The warranties contained therein shall not apply to or include any of the following and the company shall have
no liability with respect to:
1. Repair or replacement required as a result of: (A) accident; (B) misuse or neglect;
(C) lack of reasonable and proper maintenance; (D) operation in excess of
recommended capacities; (E) repairs improperly performed or replacements
improperly installed; (F) use of replacement parts or accessories not conforming
to Warfield Electric Company, Inc. specifications which adversely affect
performance or durability; (G) alterations or modifications not recommended or
approved in writing by Warfield Electric Co., Inc. and ( ) wear and deterioration
of motor appearance due to normal use or exposure.
2. Normal replacement of consumable service items, such as brushes and brush springs.
3. Motors in equipment whose ownership has been transferred from the first purchaser for use to another.
* No agent of Warfield Electric Company, Inc. is permitted or authorized to change, modify, or amend any term of this arranty.
R.A. Issued November 24, 2009
Rev A. April 20, 2010
6268 E. Molloy Rd – E. Syr cuse, NY Tel: (315) 434-9303 F x: (315) 432-9290
ADVANCED MOTORS & DRIVES, INC.
WARRANTY POLICY
1. Scope
The following document st tes the w rr nty policy of Adv nced Motors & Drives,
Inc. Kinetek division. Unless otherwise specified, the term “Adv nced Motors &
Drives” sh ll include the Unites St tes Kinetek division, its ffili tes of other Kinetek
divisions, nd their represent tives, officers nd employees. The w rr nty policy
describes Adv nced Motors & Drives, Inc. w rr nty oblig tions to its customers, the
limit tions of this policy, nd summ rizes the procedures reg rding submission of
w rr nty return cl ims, return of product, rejection nd receipt of reworked or
repl cement m teri l.
2. Limited W rr nty
Adv nced Motors & Drives, Inc. w rr nts to the origin l buyer (purch ser) of its
motors th t e ch of its products will be free from defects in workm nship nd
m teri l, during the W rr nty Period nd subject to Limit tions nd Exclusions s
deline ted in this document.
3. W rr nty Period
The W rr nty Period begins on the m nuf cturing d te of products shipped to the
user.
The b sic st nd rd W rr nty Period is of 1 (one) ye r or for the first 2000 (two
thous nd) hours of use, whichever occurs first.
A W rr nty Period longer th n 1 (one) ye r m y be w rded under contr ctu l
greements for specific Adv nced Motors & Drives, Inc. products, subject to
following Limit tions nd Exclusions.
If w rr nty cl im results in Adv nced Motors & Drives, Inc. repl cing the product,
then the W rr nty Period for the repl cement will be the rem ining unexpired
portion of the origin l W rr nty Period for the motor th t w s repl ced.
4. W rr nty Cl im Procedure
4.1 Customer must submit the w rr nty cl im within 30 (thirty) d ys of the
occurrence of the lleged non-compli nce or defect
4.2 Promptly upon customer’s communic tion, Adv nced Motors & Drives, Inc.
will provide Customer with Returned Goods Authoriz tion Number (RGA #)
AmP
™ Motors
AMD NEW MO OR WARRAN Y
R.A. Issued November 24, 2009
Rev A. April 20, 2010
6268 E. Molloy Rd – E. Syr cuse, NY Tel: (315) 434-9303 F x: (315) 432-9290
4.3 Customer must complete the Returned Goods Authoriz tion Form. Customer
must w it receipt of RGA # before returning the motor to Adv nced Motors
& Drives, Inc. Customer must properly identify the returned motor. Customer
will p y for the shipment of the returned motor.
4.4 Adv nced Motors & Drives, Inc. will w it the receipt of the motor before
processing the w rr nty cl im. If Adv nced Motors & Drives, Inc. determines
th t the returned motor is covered under the Limited W rr nty (item 2),
Adv nced Motors & Drives, Inc. will reimburse Customer for the ctu l cost of
shipment of the returned motor.
5. Determin tion of W rr nty Cover ge
5.1 As soon s pr ctic l, Adv nced Motors & Drives, Inc. will inspect the returned
motor to determine if the motor is covered under Limited W rr nty
provisions.
5.2 Approv l: If Adv nced Motors & Drives, Inc. pproves the w rr nty cl im, the
Customer will be reimbursed s deline ted in Item 6, Remedy.
5.3 Deni l: If Adv nced Motors & Drives, Inc. denies the w rr nty cl im, AMD will
promptly communic te the re sons of deni l of the cl im
5.4 If Customer dis grees with the determin tion, Adv nced Motors & Drives,
Inc. nd Customer will discuss the determin tion in good f ith nd solve the
w rr nty cl im mic bly. If the determin tion c nnot be resolved mic bly,
then Item 9 of the W rr nty Policy sh ll pply.
6. Remedy
6.1 Approved w rr nty cl ims: Adv nced Motors & Drives, Inc. will credit the
customer with n mount greed with the Customer nd not higher then the
origin l purch se price, or repl ce the motor free of ch rge, within 60 d ys of
the w rr nty cl im determin tion.
6.2 All credits issued under this Policy will be issued to the Customer’s ccount.
The Customer will not debit Adv nced Motors & Drives, Inc. without specific
written pprov l from Adv nced Motors & Drives, Inc. or Kinetek’s Controller
or Fin nce Officer.
6.3 The remedy s st ted under Item 6 provides for complete responsibility of
Adv nced Motors & Drives, Inc. for ll w rr nty cl ims for non-compli nce, or
defects.
7. Limit tions nd Exclusions
7.1 The Limited W rr nty pplies exclusively to motors th t h ve received norm l
use nd service, nd their pplic tion w s pproved by Adv nced Motors &
Drives, Inc. before purch se.
7.2 The Limited W rr nty does not pply to: ). ny motor th t w s dism ntled,
rep ired or ltered without prior consent from Adv nced Motors & Drives,
AmP
™ Motors
AMD NEW MO OR WARRAN Y
R.A. Issued November 24, 2009
Rev A. April 20, 2010
6268 E. Molloy Rd – E. Syr cuse, NY Tel: (315) 434-9303 F x: (315) 432-9290
Inc. ; b) f ilure of the motor w s the result of improper inst ll tion, vehicle
ccident or misuse.
7.3 The Limited W rr nty does not pply to component p rts th t re subject to
we r, for ex mple be rings, brushes or se ls.
7.4 This Limited W rr nty does not cover ny d m ge to the vehicle,
compens tion for loss of time or inconvenience, nd does not provide for ny
li bility for incident l or consequenti l d m ge rising from the use of the
motor by its buyer, its ssignees, Customers, gents or employees.
8. Discl imer
Except for the Limited W rr nty set forth bove, Adv nced Motors &
Drives, Inc. m kes no other represent tion or w rr nty, expressed or
implied, rising by oper tion of l w or otherwise, with respect to ny
product including, without limit tions, the w rr nties of merch nt bility
nd fitness for p rticul r purpose whether or not the use or purpose h s
been disclosed in specific tions, dr wings or otherwise, nd whether or
not ny product if specific lly designed nd/or m nuf ctured by Adv nced
Motors & Drives, Inc. for the Customer’ s use or purpose. The w rr nty set
forth bove is given in s tisf ction of ny nd ll oblig tions or li bilities
of Adv nced Motors & Drives, Inc. to ny Customer, or ny third p rty,
with respect to the product, whether such li bilities or oblig tions rise
out of contr ct, negligence, strict li bility, tort or otherwise. Adv nced
Motors & Drives, Inc. sh ll not be li ble for ny property d m ge or
person l injury to ny Customer or third p rty, with respect to the
product. Adv nced Motors & Drives, Inc. sh ll not be li ble to ny
Customer or ny Customer’s owners, officers, gents, employees, or
subcontr ctors, or otherwise for ny indirect, consequenti l, incident l,
speci l, punitive or exempl ry d m ges including without limit tion
d m ge or loss of profits or revenues, even if Adv nced Motors & Drives,
Inc. h s been dvised of the possibility of such d m ges.
9. Dispute Resolution
The interpret tion, perform nce nd completion of ll tr ns ctions under the Limited
W rr nty Policy sh ll be governed by the L ws of the St te of New York, without
reg rd to or pplic tion of its principles, procedures or l ws reg rding conflicts of
l ws.
AmP
™ Motors
AMD NEW MO OR WARRAN Y
AmP
™
& WarP
™
Motors
Safety Information
his is not an all inclusive list. Use common sense and act responsibly, electric motors are extremely powerful and
could cause death, dismemberment or other serious injury if misused or not safely handled!
Use caution when operating any motor. If you're not sure what you're doing, find a knowledgeable person to
advise you!
Remove all metal jewelry and metal objects from hands, wrist, fingers, etc. before working on any electric motor.
If working on an electric vehicle, make certain the vehicle is positioned securely with the drive wheels safely clear of
the floor and blocked up so that the drive wheels cannot make contact with the floor under any circumstances.
Block the non-drive wheels if they remain in contact with the floor so that the vehicle cannot roll in either direction.
Before troubleshooting or working on any electric vehicle, disconnect the battery and discharge all capacitors.
Reconnect the battery only as needed for specific checks or tests.
Motors must only be connected to a power source by knowledgeable and experienced personnel.
Motors should NEVER be run without a load. Running a motor without a load could result in harm to people or
the motor. Absence of a load is considered misuse and could prove dangerous to anyone in the vicinity and void the
motor warranty.
Portions of the motor may become hot and proper precautions must be taken.
Motors are heavy and are likely to become damaged if dropped, or cause damage to anything they fall upon
(including people and body parts). Use extreme caution when working with motors!
Make certain the motor is disconnected from any power source before servicing.
Motors contain moving parts that could cause severe injury if the proper precautions are not taken. Never touch
an operating motor.
Motors should never be operated beyond the limits established by the manufacturer.
Motors must not be modified in any manner; doing so will void the motor warranty and could prove extremely
dangerous.
Wear protective or safety equipment such as safety shoes, safety glasses and gloves when working with motors.
Make sure you know where the closest functioning eye wash station is before working on or testing batteries.
Do not defeat any safety circuits or safety devices.
Under no circumstances should you push in any contactor of an electric vehicle while the drive wheels are in
contact with the floor. Pushing in a contactor when the drive wheels are in contact with the floor can cause serious
property damage, personal injury or death.
AmP
™
&
WarP
™
Motors
Information
NetGain Motors, Inc's.
AmP
™and
WarP
™motors are produced by some of the nation's largest
builders of series wound DC motors. Matching their experience and knowledge with our engineering
and racing experiences, makes a perfect team to design motors that will perform under the unusual
operational dynamics of electric vehicles.
All aspects of an electric motor were considered - from the components to the methodology of assembly
- to make a motor that would perform in an electric vehicle.
Electric motors components are very critical in an electric vehicle, as are voltage and amperage, range,
bearings, shaft sizing, commutator and brush coordination, windings and temperature range. Assembly
steps critical to performance are clearances, brush “break-in”, lacquering/baking process and overall
quality of workmanship.
One area of serious study has been temperature. Where most DC motors are made to meet class F
temperature rating (155º C.), our
AmP
™
and
WarP
™motors all exceed class ratings (180º C.) (Our
WarP
™motors have been stress tested to 205º C). Whether using your DC motor for drag racing or
for an everyday EV, temperatures will normally never approach 180º C. owever, an external high
volume fan or blower can be very effective in further dissipating motor heat, and additionally clears
carbon dust from the brushes, which reduces risk of flash-over and would-be damage.
AmP
™and
WarP
™motors
are designed with an internal fan to provide cooling and motor protection
during normal operation. All
AmP
™and
WarP
™motors are also configured with a temperature snap
switch as a standard item (normally open) for early warning of an overheating situation. The snap
switch is set to open at 120º C (150º C for 11" & 13" motors) and can drive an indicator light or warning
tone in your vehicle or automatically close a circuit in your vehicle if it indicates overheating.
Motor ratings are given for the normal range of the motor's operation under various voltages and loads.
Ratings with forced cooling have not been done since there are too many variables that cannot be
controlled to allow the data to be useful. Needless to say, the motor will perform closest to its initial P
output the cooler one can keep it!
Some larger DC motors have interpoles. Because of the compactness of most motors 9” or less in
diameter, in these horsepower ratings, interpoles cannot fit inside. Our
WarP 13
™and
WarP 11
™
motors can have interpoles added, but they are not the standard configuration.
Lastly, please remember that
AmP
™and
WarP
™motors offer distinctive standard features on every
motor that we feel make it the best choice for an electric vehicle motor in the industry. Some of these
features are:
Standard
AmP
™
and
WarP
™
Motors Features
✔Specifically designed for street and racing EVs
✔Top quality, sealed, steel bearings with high temperature grease
✔Motor temperature snap switch
✔Brush Wear Indicators (on some models - eff. 4/2007)
✔igh efficiency fan
✔Optimized brush timing
✔Oversize brushes
✔igh quality brushes- not “quick-seat”
✔Fully 90% plus brush wear-in1
✔eavy duty, vibration resistant, stainless steel brush springs
✔Pre-drilled advanced timing holes for higher performance
✔Insulation that exceeds Class “ ” temperature rating
✔Best in class patented varnishing process
✔Voltage ranges starting at 48 Volts
✔Interlocking commutator construction
✔igh peak motor efficiency
✔Dynamically balanced armatures
✔and made in the U.S.A. by experts
1 The brush wear-in process is completed before the brushes are placed into the enclosure so that no carbon dust is allowed into the
motor.
Questo manuale è adatto per i seguenti modelli
14
Indice
Altri manuali NetGain Motors Motore
