NETGEAR Powerline Adaptor Kit Guida rapida

ITS

GDY

WLEN

H O

UYR

NT

APR

N TE

THE INCREDIBLY EASY GUIDE TO

CONNECTING YOUR NEW POWERLINE

ADAPTOR TO YOUR SET TOP BOX

G LO ATE

B ETHERNET CABLE E ETHERNET CABLE

A WHITE ADAPTOR C BLACK ADAPTOR

(Note this is not a modem)

D POWER CORD

TO VIEW A VIDEO OF THIS INSTALLATION,

VISIT OPTUS.COM.AU/OPTUSTV/PLCINSTALL

OR CHECK OUT THE FULL USER GUIDE AVAILABLE

AT OPTUS.COM.AU/OPTUSTV/HELP

T WO N

GTEU

The Powerline Adaptor Kit lets you connect your Optus TV with Fetch Set Top Box to your

broadband internet through the electricity wires in your home. It’s an alternative to using a

direct ethernet connection or wireless.

And since you are dealing with electricity, there are some things you need to check

before you get going:

• If you are using power boards, refer to the power board notes in Step 1 and Step 2.

• Identify a power point near your modem to plug the White Adaptor (A) into.

• Identify a power point near your Optus TV Set Top Box to plug the Black Adaptor (C) into.

• Ensure you have easy access to the power points and existing modem for setup.

SAFETY TIP: Turn power points off before you plug in any new devices or unplug any existing devices.

THE THINGS YOU’LL USE IN THE

ROOM WITH YOUR MODEM

THE THINGS YOU’LL USE IN THE ROOM WITH

YOUR SET TOP BOX AND TV

SP CNTHWT

APRO D

BITS YOU’LL NEED: AWHITE ADAPTOR BETHERNET CABLE

Go to the room with your existing modem.

Plug one end of the Ethernet Cable (B) into the Ethernet port located

at the top of the White Adaptor (A).

Plug the other end into a spare Ethernet port on your existing modem.

Plug the White Adaptor (A) into a power point near your existing modem.

IF YOU’RE USING POWER BOARDS

DO plug the power board into the White Adaptor (A).

DON’T plug the White Adaptor (A) directly into a power board unless it is plugged

into the 1st power socket closest to the cord.

DON’T plug the White Adaptor (A) directly into a surge-protected power board.

(A)

(B)

YOUR MODEM

WALL POWER POINT

POWER BOARD

SP HKPH

BCAPRO

T EOB

BITS YOU’LL NEED:  BLACK ADAPTOR D POWER CORD E ETHERNET CABLE

Go to the room with your Set Top Box and TV.

Plug one end of the Ethernet Cable (E) into the port labelled ‘1’ (dark green colour) on

the Black Adaptor (C).

Plug the other end into the port labelled ‘RJ45’ on the back of the Optus TV Set Top Box.

Plug the Power Cord (D) into the Black Adaptor (C). Plug the other end into a power

point near the Set Top Box.

IF YOU’RE USING POWER BOARDS

DON’T plug the Power Cord (D) directly into a power board unless it is plugged into the

1st power socket closest to the cord.

DON’T plug the Power Cord (D) directly into a surge-protected power board.

(D)

POWER BOARD

RJ45

(E)

(D)

(C)

SET TOP BOX

SP

IO

PEU

Turn on the power points for both the White Adaptor (A) and the Black Adaptor (C).

Check that the Power and Powerline lights on both the White Adaptor (A) and the Black

Adaptor (C) flash and then turn a solid colour.

The Ethernet light on the White Adaptor (A) should turn to a solid green (the Ethernet light

on the Black Adaptor (C) won’t turn green until the Set Top Box is fully set up).

RU E

S POGD

If all of the above have been checked, your internet connection should be set up correctly.

Go back to Step 2 in your Set Top Box Quick Install Guide to finish setting up Optus TV.

(A) (C)

1 1 Ethernet light

2 Powerline light

3 Power light

12 23 3

WHAT DO THE LIGHTS MEAN?

Ethernet

Solid on: the Ethernet

port is linked, but there

is no activity.

Blinking: there is traffic

between an Ethernet

port and the Powerline

network.

Off: there is no

Ethernet connection.

Powerline

Solid on: the

Adaptor is connected to

a Powerline network.

Blinking: the Adaptor is

sending or receiving data.

Off: the Adaptor has

not found any other

compatible Powerline

devices.

Power

Solid on: the electrical

power is switched on.

Blinking: the Adaptor is

in the process of resetting,

power saving mode, or

security setup.

Off: there is no

electrical power.

ISU O

SEI KTIS

BITS YOU’LL NEED:  WHITE ADAPTOR B ETHERNET CABLE C BLACK ADAPTOR

D POWER CORD E ETHERNET CABLE

(E)

(D)

(C)

(A)(B)

SET TOP BOX

YOUR MODEM

INTERNET DELIVERED

THROUGH YOUR

POWER LINES

THE ROOM WITH YOUR MODEM THE ROOM WITH YOUR SET TOP BOX AND TV

Q. What if I don’t have a spare Ethernet port

on my modem?

A. You will need to unplug an existing device

from your modem to free up a port to connect

your White Adaptor.

Q. What if the Power light is off?

A. Make sure that power is supplied to the

electrical outlet, and that the Powerline devices

are not plugged into an extension cord, power

strip, or surge protector.

Q. The Powerline light is off. What can I try?

A. Move the Powerline device to a closer location.

Reset the devices to factory default settings. Refer

to the full Netgear User Guide for instructions at

netgear.com/support

Q. Why does the Powerline light on my device

appear to be yellow or red in colour?

A. A yellow or red Powerline light indicates that the

device has successfully connected to the Powerline

network, however it is currently connected at a

lower speed – below 60Mbps (yellow) or below

40Mbps (red).

Make sure both Powerline devices are plugged

directly into a power socket and not into a power

board or extension cord. If available, try moving one

of the Powerline devices to a different power socket.

Q. What if the Ethernet light is off?

A. Make sure that your router and modem are on

and working correctly. Make sure that the Ethernet

cables are working and securely plugged into

the devices. Reset the devices to factory default

settings. Refer to the full Netgear User Guide for

instructions at netgear.com/support

WTIE L

GOT ANY ISSUES, PROBLEMS

OR HEAD-SCRATCHERS?

WE HAVE FAITH THAT YOU CARRIED OUT YOUR

TASK SPLENDIDLY.

BUT, IN CASE YOU NEED A LITTLE HELP, PLEASE

CONTACT OUR OPTUS TV TECHNICAL SUPPORT AT

133 937 OR VISIT OPTUS.COM.AU/OPTUSTV/PLCINSTALL

ERHG

Y’ OE

SOF S

L I

ME

OPTUS16702/1400330 (08/13)

Altri manuali NETGEAR Adattatore

NETGEAR

NETGEAR PTV1000 - Push2TV - TV Adapter Manuale utente

NETGEAR

NETGEAR XAV2602 Manuale utente

NETGEAR

NETGEAR Powerline PL1200 Manuale utente

NETGEAR

NETGEAR Powerline 1200 Manuale utente

NETGEAR

NETGEAR FA101 Manuale utente

NETGEAR

NETGEAR Arlo Go Manuale utente

NETGEAR

NETGEAR A6150 Manuale utente

NETGEAR

NETGEAR XAVB5601 Manuale utente

NETGEAR

NETGEAR XAV5001 - Powerline AV 500 Adapter Manuale utente

NETGEAR

NETGEAR A6210 Manuale utente

NETGEAR

NETGEAR XAV5601 Manuale utente

NETGEAR

NETGEAR EA101 Guida all'installazione

NETGEAR

NETGEAR XAVT5601 Manuale utente

NETGEAR

NETGEAR XAV1301v1/XAVB1301v1 Guida

NETGEAR

NETGEAR A6200 Manuale utente

NETGEAR

NETGEAR WNDA3100v2 - RangeMax Dual Band Wireless-N USB 2.0... Manuale utente

NETGEAR

NETGEAR RB-WN111 Manuale utente

NETGEAR

NETGEAR XAV2101 - POWERLINE AV 200 NANO ADAPTER Manuale utente

NETGEAR

NETGEAR XAVB1601 Manuale utente

NETGEAR

NETGEAR GA302T Manuale utente

NETGEAR

NETGEAR WG121 - 54 Mbps Wireless USB 2.0 Adapter Manuale utente

NETGEAR

NETGEAR WG111v3 - 54 Mbps Wireless USB 2.0 Adapter Manuale utente

NETGEAR

NETGEAR WNDA4100 Manuale utente

NETGEAR

NETGEAR PowerLINE WiFi 1000 Manuale utente

Manuali Adattatore popolari di altre marche

PCB Piezotronics

PCB Piezotronics 090B274 Manuale utente

Auvidea

Auvidea J20 Manuale del prodotto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuale utente

Akribis

Akribis ITF-21-BISS-MIT Manuale utente

Tenda

Tenda W54U Manuale utente

ROHO

ROHO AGILITY Manuale utente

PROLiNK

PROLiNK WN2001 Manuale utente

Hawking

Hawking HUF2 Manuale utente

Airlink101

Airlink101 AWLC4030 Manuale utente

Philips

Philips SWA4554S/10 Manuale utente

JVC

JVC TS-C9D2B Manuale di istruzioni

D-Link

D-Link DWA-121 Manuale utente

Philips

Philips SWA2037 Manuale utente

Basalte

Basalte 0610-20 Manuale utente

Yealink

Yealink EHS40 Manuale utente

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuale utente

RCA

RCA AH57R Manuale utente

Koolatron

Koolatron AC16 Manuale utente