NETGEAR ADT Pulse Manuale utente

ADT Pulse Wi-Fi Range Extender

https://alpha.adt.com/help/108[11/12/2018 10:11:06 PM]

ADT Pulse Wi-Fi Range Extender

Your ADT Pulse Gateway communicates with Wi-Fi peripheral device(s), such as Wi-Fi Range Extenders, over a

wireless local area network. Other Wi-Fi ADT Pulse peripheral devices include indoor and outdoor IP Cameras

and touchscreens.

Place your Wi-Fi Extender between the ADT Pulse Gateway and the device(s) that are out of range or having

trouble communicating with the Gateway. After adding the Wi-Fi Extender, test the device(s) to ensure all

devices are now communicating properly.

« Help Center

Overview Pulse Portal Factory Reset Reset Nano Related Topics

Accessing Pulse Portal

Add/Remove Wi-Fi Range Extender

ADT Pulse Portal

Follow the steps below to sign into your ADT Pulse Portal account.

Sign into the ADT Pulse Portal:

Select

ADT Pulse Wi-Fi Range Extender

https://alpha.adt.com/help/108[11/12/2018 10:11:06 PM]

1. Open a web browser and in the address bar, enter: https://portal.adtpulse.com.

2. Type your Username and Password, and then click Sign-In.

Wi-Fi Range Extender WN3000RPH-2ADPAS

How to Remove a Wi-Fi Extender:

1. On the System tab, select the Wi-Fi Range Extender to be deleted.

2. Click Delete to remove the Wi-Fi Extender.

ADT Pulse Wi-Fi Range Extender

https://alpha.adt.com/help/108[11/12/2018 10:11:06 PM]

3. Click Yes to confirm the deletion.

How to Enroll a Wi-Fi Extender:

1. Select the System tab, and then click Manage Devices .

2. On the Manage Devices screen, click Wi-Fi Extenders .

Note: There can only be one Wi-Fi Extender per ADT Pulse system.

ADT Pulse Wi-Fi Range Extender

https://alpha.adt.com/help/108[11/12/2018 10:11:06 PM]

3. At the bottom left of the screen click Add Note: When the Add button is grayed out and it states,

“No more can be added”, the original Wi-Fi Extender must be removed first.

4. On the Add Wi-Fi Extender screen, select the NETGEAR WN3000RPH-2ADPAS model.

5. Locate the MAC ID on the rear of the Wi-Fi Extender you are adding.

ADT Pulse Wi-Fi Range Extender

https://alpha.adt.com/help/108[11/12/2018 10:11:06 PM]

6. Enter the MAC ID number in the space provided. Do not click the Continue button at this time. If you

click Continue before its ready, the process will fail. Wait for the time-out to occur naturally, or click Go

Back, then Confirm the pop-up and then repeat steps 4-6.

7. Use a standard Ethernet cable to temporarily connect the new Wi-Fi Extender to the device LAN port

of the ADT Pulse Gateway or Total Security (TS) Base unit. You will be able to relocate the device when the

enrollment is complete.

8. Temporarily plug the Wi-Fi Extender into a wall outlet that is close to the ADT Pulse Gateway.

9. Wait for the power LED on the device to turn solid green, and then click Continue .

ADT Pulse Wi-Fi Range Extender

https://alpha.adt.com/help/108[11/12/2018 10:11:06 PM]

10. Wait while the Wi-Fi Extender is added to the system. This could take a few minutes.

11. In the Name field, assign a unique name to the Wi-Fi Extender and then, click Save in the upper

right portion of the screen.

12. Click Go Back at the top left of the screen.

13. You are returned to the Manage Devices screen. The Wi-Fi Extenders area now displays the added

extender.

14. Click Close to confirm.

15. You are returned to the System tab. The added Wi-Fi Extender appears in the list.

ADT Pulse Wi-Fi Range Extender

https://alpha.adt.com/help/108[11/12/2018 10:11:06 PM]

16. Remove the Ethernet cable, and then unplug the Wi-Fi Extender from the electrical outlet.

17. Locate the Wi-Fi Extender to its permanent position and plug it into an electrical outlet. Within a few

minutes of plugging it back in, the ADT Pulse system recognizes the extender and places it back online.

Factory Reset

Pulse Wi-Fi Range Extender

How to Perform a Factory Reset:

During the enrollment process, you may be requested to restore the Wi-Fi Extender to its factory default

settings. To reset the device, press the Factory Reset button on the Wi-Fi Extender. The power LED

changes from solid green to solid amber. Continue pressing the reset button until the power LED flashes

amber, and then release. The device reboots and the settings are restored to their default values.

The Reset button is recessed in a small opening and requires the use of a paper clip to reach it. The

ADT Pulse Wi-Fi Range Extender

https://alpha.adt.com/help/108[11/12/2018 10:11:06 PM]

location is shown in the following picture.

Reset Nano EOP

If the ADT Pulse Nano does not perform properly, or the Powerline LED does not illuminate, you may

need to restore the device to its factory default settings. To reset this device, press the Reset button on

the ADT Pulse Nano for one second, and then release. The Reset button is recessed in a small opening

and requires the use of a paper clip to reach it.

The location is shown in the picture below. The three LEDs will turn off, flash on briefly, and then

illuminate in this order: Power, Ethernet, and then Powerline. The device reboots, and the settings are

restored to their default values.

Related Topics

Pulse Gateway Offline

This video and step-by-step instructions will help you troubleshoot problems with your Pulse gateway

ADT Pulse Wi-Fi Range Extender

https://alpha.adt.com/help/108[11/12/2018 10:11:06 PM]

Return to Top

showing an "offline" status.

Pulse Nano EOP Adaptor

Information about getting started with the ADT Pulse Nano EOP Adapter.

Pulse Range Extender

Information about getting started with the ADT Pulse Wi-Fi Range Extender.

How can we help?

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali NETGEAR Estensione

NETGEAR

NETGEAR AXM765v2 Manuale utente

NETGEAR

NETGEAR WN3000RP-100NAS Manuale utente

NETGEAR

NETGEAR N300 EX2700 Manuale utente

NETGEAR

NETGEAR XAVN2001 Manuale utente

NETGEAR

NETGEAR WN2000RPTv1 Manuale utente

NETGEAR

NETGEAR EX6000 Manuale utente

NETGEAR

NETGEAR WN2000RPTv1 Manuale di formazione

NETGEAR

NETGEAR EX6100 Manuale utente

NETGEAR

NETGEAR EX6250v2 Manuale utente

NETGEAR

NETGEAR PowerLine XWNB5602 Manuale utente

NETGEAR

NETGEAR EX6200v2 Manuale utente

NETGEAR

NETGEAR WN2500RP Manuale utente

NETGEAR

NETGEAR RangeMax WPN824EXT Manuale utente

NETGEAR

NETGEAR EX6100 Manuale utente

NETGEAR

NETGEAR XAVB2602 Manuale utente

NETGEAR

NETGEAR Nighthawk EX7500 Manuale utente

NETGEAR

NETGEAR XAVN2001 Manuale utente

NETGEAR

NETGEAR EX6100 Manuale utente

NETGEAR

NETGEAR EX6100 Manuale utente

NETGEAR

NETGEAR WN2500RP Manuale utente

NETGEAR

NETGEAR XAVN2001 Manuale utente

NETGEAR

NETGEAR WN3000RP Manuale utente

NETGEAR

NETGEAR EX2700 Manuale utente

NETGEAR

NETGEAR WGX102 54 Mbps Wall WGX102 WGX102 Manuale utente

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente