NETGEAR WN3000RP Manuale utente
Universal WiFi Range Extender
WN3000RP Installation Guide
© 2011 NETGEAR, Inc. All rights reserved.
No part of this publication may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language in any form or by
any means without the written permission of NETGEAR, Inc.
DO NOT stack equipment, or place equipment in tight spaces or in drawers.
Be sure your equipment is surrounded by at least 2 in. of air space.
Technical Support
Thank you for choosing NETGEAR. To register your product, get the latest
product updates, or get support online, visit us at http://support.netgear.com.
Phone (US & Canada only): 1-888-NETGEAR
Phone (Other Countries):
See http://support.netgear.com/app/answers/detail/a_id/984.
Trademarks
NETGEAR, the NETGEAR logo, ReadyNAS, ProSafe, Smart Wizard, Auto
Uplink, X-RAID2, and NeoTV are trademarks or registered trademarks of
NETGEAR, Inc. Microsoft, Windows, Windows NT, and Vista are registered
trademarks of Microsoft Corporation. Other brand and product names are
registered trademarks or trademarks of their respective holders.
Statement of Conditions
In the interest of improving internal design, operational function, and/or
reliability, NETGEAR reserves the right to make changes to the products
described in this document without notice. NETGEAR does not assume any
liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.
3
Hardware Features
WPS
Ethernet port
Factory Reset button
WPS button
Device On/Off button
PC to ExtenderStatus
Link Rate
Note: For best performance, position
antennas pointing up.
4
The LEDs on the front show how the Extender is working:
• WPS. This LED indicates a WPS wireless connection.
-Solid green. There is wireless security (WPA or WPA2).
-Blinking green. A WPS connection is in progress.
• PC to Extender. The LED is lit when the Extender is
connected to a PC.
• Status. This LED is lit when the Extender is powered on.
• Link Rate. This LED indicates a wireless connection
between the Extender and the router.
-Green is best.
-Amber is good.
-Red is poor.
The side panel has the following features:
• Ethernet port. You can use this for a wired connection to a
computer or other device as described in the User Manual.
• Factory Reset button. To use this button, stick a paper clip into
the reset hole and hold it until the Status LED flashes.
• WPS button. Press the WPS button to wirelessly connect
the Extender to your router or wireless adapter.
• Device On/Off button. Turns the device on and off.
5
Getting Started
When the Extender has been integrated into your wireless network, it
extends the wireless network to include the area outside the range of
your existing router.
Place the Extender and Apply Power
1. Place the Extender an equal distance between your router and the
wireless device located outside the range of your router.
DO DON’T
If you have to use a different location, move the Extender closer
to the device, but still within the wireless range of the router.
Position the Extender’s antennas up as shown in the previous
section, Hardware Features.
2. Plug in the Extender, and wait 1 minute. The Status LED turns
green.
6
Set Up Two Wireless Connections
The first wireless connection is between the Extender and your
router. The second wireless connection is between your computer or
wireless device and the Extender. How you set up these connections
depends on whether or not your wireless equipment supports Wi-Fi
Protected Setup (WPS).
Using WPS to Connect the Extender to Your Router
1. First, press your router’s WPS button.
2. Within 2 minutes, press and hold the Extender’s WPS button until
its WPS LED on the front starts flashing.
When the Extender connects to your router, the Link Rate LED
lights up. The Extender's wireless network name (SSID)
changes to your router's SSID with _EXT at the end. The
Extender uses the same wireless security settings as your router.
3. After the Extender is connected to your router, use your computer
or wireless device to join the Extender’s wireless network.
7
Manual Connection without WPS
1. Use a computer to join the NETGEAR_EXT wireless network.
The PC to Extender LED turns green.
2. Open a browser window from the same computer, and it
automatically takes you to the Smart Wizard. Follow the Smart
Wizard steps to connect the Extender to your home router’s
network.
3. Then follow the wizard steps to join the Extender network at its new
name (the Smart Wizard name with _EXT at the end).
4. If you want to make changes after using the Smart Wizard, use
your browser to go to www.mywifiext.net..
5. If prompted, log in as admin with password as the password.
Wireless SSIDs and Passphrases
Enter your wireless information here:
Router Network Name (SSID) _____________________________
Router Security Passphrase ______________________________
Extender Network Name (SSID) ___________________________
Extender Security Passphrase _____________________________
8
When to Use the Extender Wireless
Network
NETGEAR recommends that you connect to the Extender wireless
network only when a PC or wireless device is in a “dead zone” where
the network connection to your existing router is very poor or non-
existent. This is because data traffic routed through the Extender
wireless network is slower than traffic directly from the original
wireless router network.
If you cannot connect from your wireless device to the Extender,
move the Extender to a different location half-way between the device
and the router. If after you try several locations, the device cannot
connect to the Extender, move the Extender closer to the device.
9
Extender Performance
The Link Rate LED and PC to Extender LED indicate
performance.
• The best performance is delivered when both of these LEDs are
green.
• A workable performance is delivered when the Link Rate LED is
amber and the PC to Extender LED is green.
• If the Link Rate LED is red, that indicates a poor connection. If it is
off, there is no connection between the Extender and the router.
• If the PC to Extender LED is off, then the PC is not connected to
the Extender.
To improve the Extender performance:
1. Move the Extender closer to the router or to a different location
with a better line of sight.
2. As you move the Extender, check the Link Rate and the PC to
Extender Connection LEDs on the front panel until you find a good
location as described in the previous section Place the Extender
and Apply Power.
10
Frequently Asked Questions
You can find more information about your product in the User Manual
available at http://support.netgear.com.
1. The Smart Wizard keeps asking me for my passphrase, and I
am sure I have entered the correct passphrase. What can I do?
It is very likely that the Extender is placed at the borderline of the
range covered by the router. Follow the instructions in the
previous section to resolve this. If you are using WEP security,
make sure that you are typing the wireless key in the correct field.
2. I connected to NETGEAR_EXT and launched a browser. Why can’t
I see the Smart Wizard?
First, make sure your computer is set up to use DHCP (most are).
Second, make sure the PC to Extender status LED is green and
you have a valid IP address. Finally, re-launch the browser and
enter www.mywifiext.net.
3. Will the Extender work if I connect it to the router with an Ethernet
cable?
No. The Extender is designed to connect wirelessly to the router.
4. What are the user name and password to log in to the Extender?
The user name is admin and the default password is password.
Both are case-sensitive.
Altri manuali per WN3000RP
5
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali NETGEAR Estensione
NETGEAR
NETGEAR EX2700 Manuale utente
NETGEAR
NETGEAR WN2500RPv2 Manuale utente
NETGEAR
NETGEAR XEPS103 - Space Saving Powerline Network Extender... Manuale utente
NETGEAR
NETGEAR Nighthawk X6S EX8000 Manuale utente
NETGEAR
NETGEAR EAX80 Manuale utente
NETGEAR
NETGEAR XAVN2001 Manuale utente
NETGEAR
NETGEAR EX6130 Manuale utente
NETGEAR
NETGEAR Nighthawk X4S Manuale utente
NETGEAR
NETGEAR EX3700 Manuale utente
NETGEAR
NETGEAR EX6920 Manuale utente
NETGEAR
NETGEAR WN3000RP Manuale utente
NETGEAR
NETGEAR EX7500-100UKS Manuale utente
NETGEAR
NETGEAR AC1900 Model R7000 Manuale utente
NETGEAR
NETGEAR EX3110 Manuale utente
NETGEAR
NETGEAR EX6150 AC1200 Manuale utente
NETGEAR
NETGEAR WN3000RPv3 Manuale utente
NETGEAR
NETGEAR EX6100 Manuale utente
NETGEAR
NETGEAR WN1000RP Manuale utente
NETGEAR
NETGEAR EX6200 Manuale utente
NETGEAR
NETGEAR AX1750 EAX18 Manuale utente
