NETGEAR ProSAFE FS726Tv2 Manuale utente

Installation Guide

NETGEAR ProSAFE Smart Switch™ FS726T v2

Package Contents

•NETGEAR ProSAFE Smart Switch™ FS726T v2

•Rubber footpads for tabletop installation

•AC power cord

•Rack-mount kit for rack installation

•Installation guide

•Smart Switch resource CD that includes the Smart Control Center Utility

and FS726Tv2 Hardware Installation Guide. (A link to the online FS726Tv2

Software Administration Manual is on the resource CD.)

Configure the Switch

Install the Smart Control Center Utility and use it to configure the switch.

Install the Smart Control Center Utility on a Computer

1. Insert the resource CD into your CD drive.

2. Run the Setup program to install the Smart Control Center Utility.

The Installation Wizard guides you through the installation.

Connect Your Smart Switch

If you have a DHCP server in you network, see Connect the Switch to Your

Network.

If you are using static IP addresses in you network, first see Configure the

Switch with a Static IP Address, and then see Connect the Switch to Your

Network.

Configure the Switch with a Static IP Address

If you are using a static IP address in you network, configure the switch IP

address before connecting the switch to your network. The default IP address of

the switch is 192.168.0.239.

Note: If you are using a DHCP server in your network, this procedure does not

apply to you; instead, go directly to Connect the Switch to Your Network.

1. Set up the computer with a static IP address in the 192.168.0.x subnet.

2. Connect the computer to the switch.

Connect the Switch to Your Network

1. Connect each computer to an RJ-45 network port on the switch front

panel.

Use Category 5 (Cat 5) or better Ethernet cable terminated with an RJ-45

connector to make these connections.

2. Connect the switch to your network.

3. Power on the switch.

4. Verify that the computer with the Smart Control Center Utility is on the

same subnet as the switch.

Internet

Configure the Switch with the Smart Control Center

Utility

1. Double-click the Smart Control Center Utility icon on your desktop or

click the icon in the Windows Start menu to run the utility and view this

screen.

2. Click the Discover button.

The Smart Control Center Utility finds the switch and displays its MAC

address, IP address, and model number.

If the utility does not discover your switch, verify that the cable connections

are secure and that the IP address configuration of the computer is in the

same subnet as the switch, and click the Discover button.

August 2013

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks

of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134 USA

3. Click the row for the switch that you want to configure.

4. Click the Web Browser Access button to view the switch Login screen.

5. Enter the default password of password in lower-case letters and click the

The System Information screen displays.

6. Configure the switch for your network.

For more information, see the FS726Tv2 Software Administration Manual.

Troubleshooting Tips

Here are some tips for correcting simple problems you might have.

•Be sure to power on your computer and switch in the following sequence:

1. Turn on the switch and wait about two minutes.

2. Turn on the computer and connect to the switch.

•Make sure the Ethernet cables are plugged in.

For each powered-on computer connected to the switch, the corresponding

switch LAN port status LED is lit.

•Make sure the network settings of the computer are correct.

In most cases, computers should be configured to obtain an IP address

through DHCP. If your network uses static IP addresses, be sure that the

switch and computer are configured with valid IP addresses. For more

information, see the software administration manual.

Support

Thank you for selecting NETGEAR products.

After installing your device, locate the serial number on the label of your product

and use it to register your product at https://my.netgear.com.

You must register your product before you can use NETGEAR telephone support.

NETGEAR recommends registering your product through the NETGEAR website.

For product updates and web support, visit http://support.netgear.com.

NETGEAR recommends that you use only the official NETGEAR support

resources.

For additional information about setting up, configuring, and using your smart

switch, see the software administration manual.You can get the manual online at

http://downloadcenter.netgear.com.

Altri manuali per ProSAFE FS726Tv2

Altri manuali NETGEAR Interruttore

NETGEAR

NETGEAR GS724T - ProSafe Switch Manuale di istruzioni

NETGEAR

NETGEAR ProSafe GSM5212P Guida utente

NETGEAR

NETGEAR GSM7248NA Manuale di istruzioni

NETGEAR

NETGEAR M4500 Series Manuale utente

NETGEAR

NETGEAR GSM7248 - ProSafe Switch Manuale utente

NETGEAR

NETGEAR GS908E Manuale utente

NETGEAR

NETGEAR ProSAFE S3300-52X Manuale utente

NETGEAR

NETGEAR ProSafe JGS524v2 Manuale elenco delle parti

NETGEAR

NETGEAR GS324P Manuale utente

NETGEAR

NETGEAR GS308 Manuale utente

NETGEAR

NETGEAR ProSAFE GS105PE Manuale utente

NETGEAR

NETGEAR FS605 v3 Manuale utente

NETGEAR

NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Manuale

NETGEAR

NETGEAR GSM7224R - ProSafe Switch Manuale di istruzioni

NETGEAR

NETGEAR ProSafe GSM7228PS Manuale utente

NETGEAR

NETGEAR GS716T - ProSafe Switch Manuale utente

NETGEAR

NETGEAR FS509 Manuale utente

NETGEAR

NETGEAR MS510TXPP Manuale utente

NETGEAR

NETGEAR GS724TS - ProSafe 24 Port Gigabit Stackable Smart... Manuale di istruzioni

NETGEAR

NETGEAR SW518 - Switch Manuale utente

NETGEAR

NETGEAR EN308TC - 8 Port 10 Base-T Hub Manuale utente

NETGEAR

NETGEAR FS605 v3 Manuale utente

NETGEAR

NETGEAR MS108EUP Manuale

NETGEAR

NETGEAR S350 Series Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente