NETGEAR WG302v1 - ProSafe 802.11g Wireless Access... Guida rapida

Altri manuali per WG302v1 - ProSafe 802.11g Wireless Access...

3

Questo manuale è adatto per i seguenti modelli

2

Indice

Altri manuali NETGEAR Punto di accesso wireless

NETGEAR

NETGEAR WG102 - ProSafe Wireless Access Point Manuale utente

NETGEAR

NETGEAR ProSafe WNAP320 Manuale utente

NETGEAR

NETGEAR WG302v2 - ProSafe 802.11g Wireless Access... Istruzioni operative

NETGEAR

NETGEAR WAX214 Manuale utente

NETGEAR

NETGEAR WG602v3 - Wireless Access Point Manuale utente

NETGEAR

NETGEAR WAC510 Manuale utente

NETGEAR

NETGEAR SSL312 - ProSafe SSL VPN Concentrator 25 Manuale utente

NETGEAR

NETGEAR WN802T Manuale utente

NETGEAR

NETGEAR ME103 - 802.11b ProSafe Wireless Access... Manuale utente

NETGEAR

NETGEAR WAX204 Manuale utente

NETGEAR

NETGEAR WAB102 - 802.11a+b Dual Band Wireless Access... Manuale utente

NETGEAR

NETGEAR WAC510 Manuale utente

NETGEAR

NETGEAR WAX206 Manuale utente

NETGEAR

NETGEAR WG602v2 - Wireless Access Point Manuale utente

NETGEAR

NETGEAR WN604 - Wireless-N 150 Access Point Manuale utente

NETGEAR

NETGEAR PowerLine XWNB5602 Manuale utente

NETGEAR

NETGEAR WAX206 Manuale utente

NETGEAR

NETGEAR ProSAFE WN203-200PES Manuale utente

NETGEAR

NETGEAR WAX214 Manuale utente

NETGEAR

NETGEAR PowerLine XWNB5602 Manuale utente

NETGEAR

NETGEAR HE102 - Wireless Access Point Manuale utente

NETGEAR

NETGEAR WN604 - Wireless-N 150 Access Point Manuale operativo

NETGEAR

NETGEAR Telstra Wi-Fi 4G Advanced II AirCard 790S Manuale utente

NETGEAR

NETGEAR WAX630E Manuale utente

Manuali Punto di accesso wireless popolari di altre marche

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuale utente

Ubiquiti

Ubiquiti NanoStation NSM2 Manuale utente

Cisco

Cisco Aironet 1550 Series Manuale utente

Aruba

Aruba IAP-335 Manuale utente

Advantek Networks

Advantek Networks AWN-AP-54MR Manuale utente

IP-COM

IP-COM AP355 Manuale utente

Buffalo

Buffalo AirStation WLA-L11G Manuale utente

EnGenius

EnGenius EnStationACv2 Manuale utente

D-Link

D-Link DAP-3662 Manuale utente

xG Technology

xG Technology xMax CN1300 Manuale utente

Widelink

Widelink ezWave WAP-1100 Series Manuale utente

Edimax

Edimax CAP1200 Manuale utente

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuale utente

Aruba

Aruba AP-203R Manuale utente

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuale utente

CreatComm

CreatComm TB5F Manuale utente

SineDigital

SineDigital MW-1500AP(H) Manuale utente

TP-Link

TP-Link AP9650 V1 Manuale utente

WG302v2, WAG302v2 –DHCP: Use and Configuration

The WG302v2/WAG302v2 can act as a DHCP server for wireless client. The

WG302v2/WAG302v2 provides the pre-configured TCP/IP configuration for wireless clients

connected to the access point.

The WG302v2/WAG302v2 DHCP server only assigns network information to clients that connect

to the access point through security profiles that are on the same VLAN as security profile 1.

VLAN 1 is the default VLAN for all security profiles.

Enabling the DHCP server on the WG302v2/WAG302v2 causes Network Address

Translation (NAT) to be enabled on the access point - The WG302v2/WAG302v2 in this case

acts similar to a NAT router for the wireless clients who receive their network information from the

access point. All network traffics from the wireless client designated to the wired network are

NAT-ed to the access point’s LAN IP address.

As a result, the DHCP network (wireless network) configured in the WG302v2/WAG302v2 DHCP

settings must be in a different subnet than the wired network.

NETGEAR

Internet Access RouterFirewall

LOCAL

PWR TEST 1 2

LNK

INTERNET

ACT 4

100

LNK/ACT

3

MODEL

FR314

Router

192.168.0.1

Wireless Clients 192.168.1.2-192.168.2.50

Wired device 192.168.0.x

192.168.0.228

WG302v2/WAG302v2

In the above example, the wired network where the router and the access point resided is

192.168.0.0/24. When enabling the DHCP server on the WG302v2/WAG302v2, the DHCP

network must be in a different subnet than 192.168.0.0/24. In our example, we use

192.168.1.0/24.

To enable DHCP server on the WG302v2/WAG302v2, go to Advanced->IP Settings in the access

point’s management interface. Select the radio button to enable DHCP server. Enter the starting

and ending IP Address of the DHCP pool, subnet mask, gateway IP address, primary and

secondary DNS server addresses, primary and secondary WINS server addresses and lease

time. Click Apply.

Wireless clients connect to the WG302v2/WAG302v2 will receive one of the addresses from the

DHCP pool. However, DNS Server address assigned to the wireless client will always be the

same address as the default gateway address. It was because the WG302v2/WAG302v2 uses

DNS proxying. The wireless client’s DNS requests are sendt to the access point then proxy to the

designated DNS Server specified in the DHCP setting.

This is specific for v2 of WG302 and WAG302. WG302v1 and WAG302v1 DHCP server works

differently. Refer to the reference manuals of WG302v1 and WAG302v1 on how to setup DHCP

server on those access points.