NetPing 254R304 Manuale utente
[ENG] NetPing Input+Relay 254R304, User Guide
[ENG] NetPing Input+Relay 254R304, User Guide -
2
Содержание
[ENG] [Input+Relay 254R304] 1. Introduction............................................................ 4
[ENG] [Input+Relay 254R304] 2. Limitation of Liability and Copyright .................... 5
Limitation fo Liability and Copyright ................................................................................................ 5
[ENG] [Input+Relay 254R304] 3. Connectors and Indication Elements.................... 6
The Front Panel.................................................................................................................................. 6
The Back Panel................................................................................................................................... 7
The Side Panel.................................................................................................................................... 7
[ENG] [Input+Relay 254R304] 4. Installation and Connection .................................. 9
[ENG] [Input+Relay 254R304] 5. Connection of the External Sensors and Executive
Devices....................................................................................................................... 11
Sensors and devices of the 1-wire model range............................................................................. 11
Sensors of the "dry contact" type ................................................................................................... 11
Sensors with two wires .................................................................................................................................................... 11
Liquid sensor (mod.2605) ................................................................................................................................................ 11
PIR detector (mod.M105-1E)............................................................................................................................................ 13
Executive devices............................................................................................................................. 14
Buzzer (mod.STD-3025) ................................................................................................................................................... 14
NetPing AC/DIN socket .................................................................................................................................................... 15
[ENG] [Input+Relay 254R304] 6. Electrical Parameters of the Input Lines............. 17
Electrical parameters of the input lines:......................................................................................... 17
Equivalent circuit ............................................................................................................................. 17
[ENG] [Input+Relay 254R304] 7. Resetting Settings to Default Values ................... 18
[ENG] [Input+Relay 254R304] 8. PoE Technology.................................................... 19
[ENG] [Input+Relay 254R304] 9. Additional Documents and Links ........................ 20
[ENG] [Input+Relay 254R304] 10. Warranty Obligations ......................................... 21
[ENG] [Input+Relay 254R304] 11. Operation Conditions and Storage ................... 22
[ENG] NetPing Input+Relay 254R304, User Guide -
–
[ENG] NetPing Input+Relay 254R304, User Guide -[ENG] [Input+Relay 254R304] 1. Introduction
[ENG] [Input+Relay 254R304] 1. Introduction
–
•
•
•
[ENG] [Input+Relay 254R304] 1. Introduction
This guide will help you get acquainted with the specialities and features of the NetPing Input+Relay 254R304,get
an idea of its functionality and technical characteristics and prepare the device for operation.
This User Guide is designed for network administrators and users, who set up or operate the device. To work with
the device properly, a user must have an idea about the principles of building and functioning of local networks as
well as possess the next knowledge and skills:
Basic knowledge in the area of local and global networks;
Basicknowledgeintheareaofarchitectureandprinciples of work of TCP/IP networks;
Basic knowledge in the area of architecture and principles of work of Ethernet networks.
[ENG] NetPing Input+Relay 254R304, User Guide -[ENG] [Input+Relay 254R304] 2. Limitation of Liability and Copyright
[ENG] [Input+Relay 254R304] 2. Limitation of Liability and Copyright
–
[ENG] [Input+Relay 254R304] 2. Limitation of Liability and
Copyright
Limitation fo Liability and Copyright
The information, contained in this document, can be changed by a manufacturer without a prior notice. Although
every effort was made to make the information in this document accurate and without errors, the manufacturer is
not liable for their possible presence and for the consequences that may result from the errors herein. The
manufacturer is not liable if supplied equipment, software and this user guide does not correspond to expectations
of a user and his/her opinion about where and how to use all the above. All copyrights on supplied devices,
described in this User Guide, as well as firmware and software of devices and this User Guide belong to NetPing
global Ltd. Сopying, replication and translation of this user guide to other languages are not allowed without a
prior written permission of a rightholder. Copying, replication, changing, disassembling of provided softwareare
not allowed without a prior written permission of a rightholder.For the part of software that is provided in source
codes, there is a separate license agreement, which defines an order of its use and modification. Other trademarks
used in this description belong to corresponding rightholders.
[ENG] NetPing Input+Relay 254R304, User Guide -[ENG] [Input+Relay 254R304] 3. Connectors and Indication Elements
[ENG] [Input+Relay 254R304] 3. Connectors and Indication Elements
–
[ENG] [Input+Relay 254R304] 3. Connectors and Indication
Elements
The Front Panel
Element Function
Connector for external battery pack A connector which is used to connect the external battery pack
DC in A connector which is used to connect 12V power
RESET A button which resets the settings to the factory ones
PWR Led A LED to indicate the operation of the device
Power Class switch A power class switch — a class 3 for IEEE 802.3af (PD 13W) and a
class 4 for IEEE 802.3at (PD 25.5W)
Eth PoE in Ethernet 10/100/1000 BASE-TX PoE in connector
Eth PoE out Ethernet 10/100/1000 BASE-TX PoE out connector of the IEEE
802.3af / 802.3at standard without the function of determining a
compatible PoE device
It is forbidden to power the device from both 12V adapter and PoE simultaneously.
[ENG] NetPing Input+Relay 254R304, User Guide -[ENG] [Input+Relay 254R304] 3. Connectors and Indication Elements
[ENG] [Input+Relay 254R304] 3. Connectors and Indication Elements
–
The Back Panel
Element Function
1W port The port terminals for connecting 1 wire sensors. Each 1-wire
terminal has its own output stage and does not depend on the length
of the wires connected to another 1-wire terminal.
Input lines Input line terminals for connecting external sensors of a "dry
contact" type (input resistance 4.7 kOhm). They also work as
impulse counters 12V and support the connection of impulse
counters. The readings of each input are stored in non-volatile
memory.
+5V, +12V and GND terminals +5V (250mА), +12V (250mA), GND terminals are used to power
external sensors and devices.
The Side Panel
[ENG] NetPing Input+Relay 254R304, User Guide -[ENG] [Input+Relay 254R304] 3. Connectors and Indication Elements
[ENG] [Input+Relay 254R304] 3. Connectors and Indication Elements
–
Element Function
Built-in relay operation
indicators
4 LEDs for indication of the built-in relay operation
Built-in relay terminals The teminals for built-in relays (two-way contact NO-N-NC), up to 24V current up
to 500mA
[ENG] NetPing Input+Relay 254R304, User Guide -[ENG] [Input+Relay 254R304] 4. Installation and Connection
[ENG] [Input+Relay 254R304] 4. Installation and Connection
–
[ENG] [Input+Relay 254R304] 4. Installation and Connection
In order to connect the device, follow these steps:
1. Remove the device from its packaging and mount it onto the place you need (or into DIN rail);
2. Connect the devices which you need (see «[ENG] [Input+Relay 254R304] 5. Connection of the External Sensors
and Executive Devices» section).
3. Power the device from a 12V power supply and connect it to the local network. IP address 192.168.0.11 was set by
default. Fot the initial setting of the device make sure that the address of your computer is located in the same IP-
subnet as the address of the device. For example, the address which is set on the computer can be 192.168.0.11
mask 255.255.255.0.
4. For the initial configuration of the device parameters using the web-interface, make sure that the device
responds to the ping command at its IP address.
It is forbidden to power the device from both 12V adapter and PoE simultaneously.
[ENG] NetPing Input+Relay 254R304, User Guide -[ENG] [Input+Relay 254R304] 4. Installation and Connection
[ENG] [Input+Relay 254R304] 4. Installation and Connection
–
•
•
5. In order to configure the device, open the web-interface of the device using this addresshttp://192.168.0.100with
the help of a browser (it is recommendable to use the latest version of Google Chrome). In order to authorize, use:
Login:visor
Password:ping
Further configuration of the device is carried out in the web-interface of the device.
Attention! The description of the web-interface can be found in a separate documentDKSF 561.X IU,where X —
the number of a firmware version of the device, which description you use.
Indice
Altri manuali NetPing Staffetta
