4.4 Supported Frequency
The currently supported network bands are: AS923, US915_HYBRID, EU868, AU915, CN470 and
KR920.
4.5 Data Report
After the device is powered on, the network will send a version package immediately, and then send
the data report after about 45 seconds.
The default report configuration of the device is as follows:
ReportMaxTime: RA0701_ RA0701Y : 180 seconds, R72601: 900 seconds (subject to factory
settings)
ReportMinTime: 30 seconds;
ReportChange: 0;
The RA07001_R72601_RA0701Y device does not support the ReportChange function. That is, the
configuration is invalid. The sent report data string is always sent according to the ReportMaxTime
cycle. The data of the device Report is: CO value, ReportType count = 1;
Note:
1. The value of ReportMaxTime is greater than (ReportType count *ReportMinTime + 10 units:
second).
2. The device also supports Cayenne's TxPeriod cycle configuration instructions. Therefore, the
device can also perform a report according to the cycle time of the TxPeriod value; and at a certain
time, the report period is ReportMaxTime or TxPeriod, depending on which cycle time is configured
last time;
3. After pressing the button, the device needs 35s time to process the sensor information, please be
patient.
5. Restore to Factory Setting
RA0701_R72601_RA0701Y has a power-down save network information memory function. This
feature is turned off by default. That is, it will be re-joined to the network every time when it is
powered back on.
To enable it by using the ResumeNetOnOff command, each time the power is rewritten, the last
joining information will be recorded (including saving the network address information assigned to
it, etc., if users want to join a new network, you need to perform a factory reset first.) The device
will be automatically joined to the network.
Operation method:
