How to use Z805B
Wireless control Z805B device
A switch control device such as Netvox Z501 remote controller paired with Z805B may
send ON or OFF command, Z805B would respond to either turn ON or OFF accordingly.
Manual switch
Please refer to installing an external switch section of the manual.
Power Consumption Reporting
When the load is attached to the device, the embedded meter reads the supplied current
drawn overtime. Z805B reports the readings to a paired target device normally are an
in-home display or consumption data logger. Ensure that you go through consumption
reporting and configure reporting time interval described in ZiG-BUTLER page otherwise
Z805B will not sent consumption reading.Z805B can report the consumption reading to
Netvox’s ZiG-BUTLER or to any 3rd party in-home display.
Power drawn overtime is measured. Current (unit mA), Voltage (unit V), Power (unit W)
and Energy (unit Wh).
Permit other device to join
Z805B is featured to be a router in the network. It permits join other devices to the network.
By default the router device Z805B does not allow permit-to-join function in a normal
operation to protect the network from unexpected or unauthorized join attempt. You will
need to open up the permit-join on Z805B to allow new devices (a router or an end device)
to join.
Operation:
