New Air NMF7K5BK00 Manuale utente
Manual v1.0
NewAir 24” Outdoor Patio
Pedestal Misting Fan
SKU: NMF7K5BK00
2
newair.com
READ AND SAVE THESE INSTRUCTIONS.
TABLE OF CONTENTS
Register Your Product Online............................................................................... 3
Safety Information & Warnings ........................................................................... 4
Parts List...............................................................................................................5
Assembly & Installation ....................................................................................... 6
Operating Instructions.......................................................................................11
Cleaning & Maintenance....................................................................................12
Troubleshooting.................................................................................................13
Limited Manufacturer’s Warranty..................................................................... 14
SPECIFICATIONS
MODEL NO.
NMF7K5BK00
PRODUCT DIMENSIONS:
17” (D) x 24” (W) x 65” (H)
PRODUCT WEIGHT:
50 lbs
VOLTAGE:
110V –120V
WATTAGE:
280W
FAN HEAD SIZE:
24”
MAXIMUM RUN TIME:
4 hours on high speed
TANK SIZE:
1.76 gallons
FAN SPEEDS:
3
RPMS
1200/1300/1500
NOISE LEVELS (DB)
62/67/70
TEMPERATURE DROP:
30-45°F
OSCILLATION:
90°
3
newair.com
REGISTER YOUR PRODUCT ONLINE
Register Your NewAir Product Online Today!
Take advantage of all the benefits product registration has to offer:
Service and Support
Diagnose troubleshooting and service issues faster and more
accurately
Recall Notifications
Stay up to date for safety, system updates and recall notifications
Special Promotions
Opt-in for NewAir promotions and offers
Registering your product information online is safe & secure and takes less
than 2 minutes to complete:
0
Alternatively, we recommend you attach a copy of your sales receipt below and
record the following information, located on the manufacturer’s nameplate on
the rear of the unit. You will need this information if it becomes necessary to
contact the manufacturer for service inquiries.
Date of Purchase: ___________________________________________
Serial Number: ____________________________________________
Model Number: ____________________________________________
newair.com/register
4
newair.com
SAFETY INFORMATION & WARNINGS
Please read all instructions before using this misting fan. Failure
to carefully read all instructions may result in possible electric
shock or fire hazard and will void the manufacturer’s warranty.
•Use this misting fan only as instructed in this owner’s manual. Other uses may
cause electric shock, injury or fire.
•Close supervision is required if this fan is used near children or pets.
•To protect against electric shock, do not immerse this fan or its plug and cord
in water.
•If the fan is being transported or will not be in use, disconnect it from the power
supply by tightly gripping the fan’s plug and pulling it from the power outlet. Do
not disconnect the power supply by pulling on the fan’s power cord.
•Avoid contact with any of the misting fan’s moving parts.
•Place the misting fan on a level surface.
•This misting fan is intended to fit into a matching receptacle. Under no
circumstances should the grounded plug be altered in any way. An improper
connection can result in electric shock.
•If possible, avoid using extension cords with this misting fan. If an extension
cord is absolutely necessary, do not use more than one extension cord and do
not use a single extension cord to operate more than one fan.
•Do not insert objects or allow fingers to enter into the fan head, as this may
cause electric shock or bodily injury. Do not block or tamper with the misting
fan while it is in operation.
•Do not place the fan near curtains, drapes, or any other materials that can get
caught in the misting fan’s grills.
•Do not run the power cord under mats or carpeting, and do not cover the
power cord with runners. Arrange the power cord away from room traffic or
where it can be tripped over.
•Do not operate this misting fan in the presence of flammable substances or
explosives.
•Do not place the fan near an open flame or cooking/heating appliances.
•If the fan will not be in use, empty the tank of any remaining water.
•If the fan’s plug or power cord is damaged, do not attempt to repair the
components yourself.
5
newair.com
PARTS LIST
Check to insure the following parts are included with your product:
•4 M6x16 screws
•large washers
•small washers
•nuts
•Stand pole
•fan base
•water pump
•metal pipe
•fan head
•water tank
PRODUCT FEATURES
•Designed for cooling large areas such as patios, backyards, warehouses, and
more.
•Centrifugal misting system means there’s no clogged nozzles and no need
to use filtered water
•Constructed of heavy-gauge, anticorrosive metal for safety and durability
•Quiet, high-efficiency fan motor
•Adjustable misting flow with a fully insulated seal around the water pump
•Oscillating fan head covers a wider area
•Adds moisture to dry environments and eliminates airborne dust particles
•Covers up to 800 square feet and features a 4-hour maximum run time with
each full tank
6
newair.com
ASSEMBLY & INSTALLATION
It is strongly recommended that a second person be available to
assist during the assembly process.
DO NOT plug in the fan before assembly. This misting fan comes in two separate
boxes. Carefully remove all packaging materials and retain for future
storage/use. Make sure there is no residual foam left in any of the components.
A screwdriver and wrench will be required to assemble this misting fan.
STEP 1: ASSEMBLING THE STAND POLE
1. Refer to diagram 1 below. Remove the following parts from the fan’s base
and set them aside: four (4) M6x16 screws, large washers, small washers,
and nuts.
2. Place the stand pole on the fan base, align the screw holes and secure the
pole in place using the screws, washers and nuts. Make sure the hole located
near the bottom of the stand pole is facing the square shaped pump slot.
7
newair.com
STEP 2: CONNECTING THE BACK PANEL
1. Refer to diagram 2. Find the rectangular panel located on the back of the
stand pole. Remove this back panel from the stand pole by completely
unscrewing it from the stand pole. Set it aside.
2. Locate the water pump. This is packaged separately from the stand pole and
can be found in box #1. You will see 2 water hoses (1 large and 1 small) and
1 electric wire connected to the water pump. Thread the hoses and wire into
hole A (smaller, circular hole) and up the stand pole through hole B (larger,
elliptical shaped hole).
3. Locate the back panel removed in step 1 and orient it so that the label with
the fan speeds is located on top of the dial.
4. Take the small water hose from hole B and locate the connector that is
attached to the back panel. Connect the small water hose to the lower valve
opening on the connector.
8
newair.com
STEP 3: CONNECTING THE WATER LINE
1. Refer to diagram 3. Locate the metal pipe and fan head and attach the fan
head onto the pipe. The fan head should have 2 water hoses (1 large and 1
small) and 1 electric wire with male connector plug connected to it.
2. Take the electric wire with the male connector that is located on the back of
the fan head and thread it through hole D.
3. Take the large water hose with 2 smaller water hoses within it and thread
the entire piece through hole C. You should now have the water hoses and
electric wire coming out the end of the metal pipe.
9
newair.com
STEP 4: CONNECTING THE FAN HEAD TO THE STAND POLE
1. Refer to diagram 4. Place the stand pole/base on a level surface.
2. Take the water hoses and electric wire from the fan head/pipe and thread
them through the top of the stand pole. Do not attach the fan head to the
stand pole yet.
3. Connect the male and female connector plugs together.
4. Take the small water hose from the fan head/metal pipe and connect it to
the other valve opening attached to the back panel.
5. Locate the large water hose from the fan head/metal pipe and connect it to
the large connector with the quick release valve.
6. Attach the fan head/metal pipe onto the stand pole and thread all hoses and
wires into the stand pole through hole B (elliptical shaped hole on the stand
pole). Make sure none of the hoses or wires are bent.
7. Reattach the screws onto the back panel.
8. Tighten the bolts located on the sleeve by the back panel to secure the stand
pole and fan head/pipe together.
10
newair.com
STEP 5: ASSEMBLING THE WATER TANK
1. Refer to diagram 5. Take the water pump and place it in the pump slot.
2. Locate the water tank and place it on the fan base, making sure to line up
the pump opening with the pump slot so that they fit together. Place any
protruding hoses or wires into the tank.
3. Put the tank cover over the tank.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali New Air Fan
New Air
New Air NIF18CBK00 Manuale utente
New Air
New Air WindPro18W Manuale utente
New Air
New Air FMF2K5BK00 Manuale utente
New Air
New Air NFN12AWH00 Manuale utente
New Air
New Air NIF20CBK00 Manuale utente
New Air
New Air NIF20WBK00 Manuale utente
New Air
New Air AF-410BK Manuale utente
New Air
New Air WindPro18F Manuale utente
New Air
New Air AF-310 Manuale utente
New Air
New Air AF-600 Manuale utente
