NewLine HO Series Manuale utente
Collaboration Touch Screen
HO Series
Quick Start Guide
V1.0
2
Thank you for choosing Newline collaboration touch screen.
The symbol of the crossed out wheeled bin indicates this product should not be placed in
municipal waste. Instead, dispose of waste equipment by handing it over to a designated
collection point for the recycling of electrical and electronic equipment.
3
Symbol Convention
Symbols are used in this document to indicate operations that require special attention. The
symbols are defined as follows:
Indicates a hazard with risk that, if not avoided, could result in death or
injury.
Indicates a potentially hazardous situation that, if not avoided, could
result in equipment damage, data loss, performance deterioration, or
unanticipated results.
Provides additional information to supplement operation in the main
text.
WARNING
4
Safety Instructions
For your safety, please read the following instructions before you use the product. Improper operations may cause
severe injury or property damage. Please refrain from repairing the product on your own.
If major failures occur, disconnect the product from power source immediately.
Major failures include the following:
Smoke, peculiar smell or abnormal sound discharged from the product.
No image or sound is displayed, or if image error occurs.
If the above scenarios occur, do not continue using the product. Disconnect power supply
immediately and contact professional staff.
Do not drop liquid, metal or anything combustible into the product.
If liquid or pieces of metal get into the product, turn off the power and disconnect the
power source, then contact professional staff.
Supervise children when they are close to the product.
Place the product on a stable surface.
An unstable surface includes but is not limited to an inclined surface, a shaky stand, desk or
platform, which might cause turnover and damage.
Do not open the cover or modify the product on your own.
High voltage components are installed in the product. When you open the cover, high voltage,
electric shock, or other dangerous situations may occur.
If inspection, adjustment, or maintenance is required, contact the local distributor
for help.
Use the specified power supply voltage.
To prevent the product from being damaged, do not use cables other than the one
provided with the product.
Use a three-wire socket and ensure that it is properly grounded.
Pull out the power plug from the socket if the product is not to be used for a long period.
Regularly clean the dust and metal around the power plug.
Fire or electric shock may be caused if the product is powered on, when you are
cleaning.
Pull out the power plug before cleaning it with a dried cloth.
WARNING
5
Do not place items on top of the product.
Do not put items, such as a liquid container (a vase, flowerpot, cosmetics or liquid
medicine) on the top of the product.
If any water or liquid is spilled on the product, a short circuit may occur and cause fire or
electric shock.
Do not walk on or hang any items on the product.
Do not install the product in an improper place.
Do not install the product in humid places, such as the bathroom, the shower room, near
windows, or outdoor environments that experience rain, snow or other harsh weather.
Avoid installation near hot spring vapor. The preceding environments may cause faults in
the product or electric shock under extreme conditions.
Do not put expose the product to a fire source, such as an ignited candle.
Pull out the power plug during thunderstorms.
Do not touch the product during a lighting storm to avoid electric shocks.
Install or place components that supply high enough voltage out of the reach of children.
Do not touch the power cable with wet hands.
Do not install the product in high temperature environments.
Do not install the product near a heat source, such as a radiator, a heat reservoir, a stove or
other heating products.
Do not expose the product to direct sunlight, which may cause high temperatures and
subsequent faults in the product.
Transport of the product.
Pack the product for transport or maintenance by using the cartons and cushioning
material provided with the product.
Keep the product vertical during transport. The screen or other components are easily
broken if the product is moved inappropriately.
Before you move the product, disconnect all external connections and separate all toppling
preventing products. Move the product carefully to prevent it from being hit or squeezed,
especially the screen, which may cause injury if broken.
WARNING
CAUTION
6
Do not cover or block up any vents on the product. Any overheated components may cause fire,
damage the product, and shorten the product’s service life.
Do not lay the product down where the venting surface will be covered.
Do not install the product on a carpet or cloth.
Do not use a cloth such as table cloth to cover the product.
\
Keep away from the product when using a radio.
The product complies with the international EMI standard regarding prevention of radio
interference. However, interference may still exist and cause noises to the radio. If noise occurs in
the radio, try the following solutions.
Adjust the direction of the radio antenna to avoid the interference from the product.
Keep the radio away from the product.
If the screen glass is broken or falls off.
Keep all personnel 10 feet away from the screen to ensure safety.
Do not perform any installation or disassembly while the screen glass is broken or has fallen
off.
Do not damage the power cable.
Do not damage, change, twist, bend, or forcibly drag the power cable.
Do not put weights (such as the product itself) on top of the power cable.
Do not forcibly drag the cable when you pull out the power plug. If the power cable is
damaged, please contact the local distributor to repair or replace it.
The power cable in the accessory box is for this product only. Do not use it on other
products.
Correct battery usage.
Galvanic corrosion, electric leakage, and even fire may be caused by improper battery
usage.
It is recommended to use the designated type of battery and install the battery by correct
electrodes (positive and negative).
Do not use a new battery alongside a used one.
Take out the batteries if the remote control is not to be used for a long period.
Do not expose the batteries to overheated environments such as sunlight and firing.
Dispose of used batteries based on your local regulations.
Suggestions for usage:
Use the product in an environment with comfortable lighting. It is harmful to your eyes to
watch in a too bright or too dark environment.
Rest your eyes after an extended period of usage.
Keep sufficient distance from the product to protect your eyes and prevent eyestrain.
Adjust the volume to an appropriate level, especially at night.
Use amplifier equipment as the audio input source with caution. If you must use amplifier
equipment, the input power should not exceed the maximum of speaker power. Otherwise,
the speaker can become overpowered and damaged.
7
About USB port.
Front USB ports and rear USB 3.0/USB 2.0 ports switch connections based on signal sources. If
the current signal source is reading the data from an external product connecting to the port,
please
switch the signal source after the data reading is complete. Otherwise, the data or product
may be damaged.
Special note:
Under the premise of ensuring the display quality, the energy consumption can be reduced
by reducing the brightness of the display.
This product can be paired with various OPS Computers, which can be upgraded or
replaced according to your needs.
8
1 Overview
1.1 Parts
There are electronic components in the plastic parts at the bottom of the product. If the plastic
parts are damaged, the camera or the product may malfunction. To avoid damage to the
plastic parts, please pay attention to the following:
Do not squeeze, knock at or disassemble the plastic parts.
Do not place heavy objects on plastic parts.
When transporting the product, do not impact the plastic parts at the bottom.
When transporting the product, do not place the plastic parts on the ground.
CAUTION
9
Front view
65/75/86 inch：
10
Rear view
65/75/86 inch：
1 Touch screen 9 Power socket
2 Light sensor 10 Power switch
3 Power button 11 Speaker
4 IR receiver 12 Rear port 1
5 Bottom plastic part 13 Rear port 2
6 Microphone 14 OPS Computer slot
7 Camera 15 SoundBar port
8 Camera indicator
Indice
Altri manuali NewLine Pannello touch
NewLine
NewLine TRUTOUCH UB Series Manuale utente
NewLine
NewLine ER Series Manuale utente
NewLine
NewLine Trutouch X5 Manuale utente
NewLine
NewLine BNL16X5 Manuale utente
NewLine
NewLine TRUTOUCH TT-6516UB Manuale utente
NewLine
NewLine Trutouch X7 Manuale utente
NewLine
NewLine TRUTOUCH RS Series Manuale utente
NewLine
NewLine TRUTOUCH X9 Manuale utente
NewLine
NewLine Collaboration HO Series Manuale utente
