NewLine TRUTOUCH TT-6516UB Manuale utente
Welcome:
Thanks for purchasing this product. Please read the instructions carefully before using this
product.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
● Consult the dealer or an experienced radio/ TV technician for help.
The symbol of the crossed out wheeled bin indicates this product should
not be placed in municipal waste. Instead, you need to dispose of the
waste equipment by handing it over to a designated collection point for
the recycling of waste electrical and electronic equipment.
1. Safety Instruction
2. Installation Requirement
3. Introduction
4. Basic Operation
Power on
Power off
Software Installation
Software Uninstall
Software Positioning
Positioning Method for Windows 7 System
OPS Installation
5. Toolbar Introduction
Task Manager
Whiteboard
Gallery
File Manager
System Settings
Browser
Audio Only
Child Lock Setting
Application Programs
Temperature Reminder and Thermal Shutdown
6. Signal Source Selection
7. Menu
Sound Mode
Screen Setting
Display Setting
8. ECO Mode
9. Serial Port Control
10. VGA Signal Input
11. Multimedia Format Support
12. Common Faults and Solutions
13. Care and Maintenance
Maintenance Tips
Clean the Infrared Tube
14. Technical Parameters
01
04
06
14
14
16
16
17
17
19
21
22
23
24
27
28
28
29
29
30
31
32
33
34
34
34
36
37
38
40
41
42
45
45
45
46
Contents
01
Safety Instruction
For your safety, please read the following instruction before you use the product. Serious
injury or property loss may be caused by improper operations. Do not try to repair the
product by your own.
WARNING
Disconnect the product from power supply immediately if major failures
occur.
The major failures include the following:
●Smoke, peculiar smell or abnormal sound is discharged from the product.
●No image or sound is displayed, or the image error occurs.
●Where the mains plug or an appliance coupler is used as the disconnect device
the disconnect device shall remain readily operable.
In the preceding scenarios, do not continue to use the product, disconnect power
supply immediately and contact professional staff for troubleshooting.
The socket-outlet shall be installed near the equipment and shall be easily
accessible.
Do not drop liquid, metal or combustible into the product.
●If any liquid or metal is dropped into the product, power off the product and
disconnect power supply, then contact professional staff for solutions.
●Pay attention to the children when they are close to the product.
Do not damage the power cable.
●Do not damage, change, wind, bend, heat or drag the power cable forcibly.
●Do not put weights (such as the product itself) on the power cable.
●Do not drag the cable forcibly when you pull out the power plug. If the power
cable is damaged, please contact the local distributor to repair or replace it.
●The power cable in the accessory box is for this product only. Don't use it on
other devices.
Put the product on a stable surface.
An unstable surface includes and does not limited to an inclined plane, a shaky
stand, desk or platform, which might cause the turnover and damage.
Use the battery correctly.
● Galvanic corrosion, electric leakage and even re may be caused by improper
battery usage.
●It is recommended to use the designated type of battery and install the battery
by correct electrodes (positive and negative electrodes).
●Do not install and use new battery together with the used one.
●Take out the battery if the remote control is not used for a long period.
●Do not expose the battery under overheated environments such as sunlight and
ring.
●Dump the used battery based on local regulations.
Pull out the power plug during thunderstorms.
●Do not touch the product when lighting to avoid electric shock.
●Install or place components which power supply voltage is high enough to cause
personal injury in places out of the reach of children.
02
WARNING
Do not open the cover or change the product by your own.
High voltage components are installed in the product. When you open the cover,
high voltage, electric shock or other dangerous situations may occur. If inspection,
adjustment or maintenance is required, contact the local distributor for help.
Use the specied power supply.
●Do not use any types of power cables other than the one provided with the
product to prevent the product from being damaged.
●Use a three-wire socket and ensure that it is properly grounded.
●Pull out the power plug from the socket if the product is not used for a long period.
Before you move the product, disconnect all external connections and
separate all toppling preventing devices.
Move the product carefully to prevent it from being hit or squeezed, especially
the screen, which may cause injury if broken.
Clean the dust and metal on the power plug regularly.
● When you are cleaning, re or electric shock may be caused if the product is
powered on.
●Keep in mind to pull out the power plug before cleaning it by using a dried cloth.
Do not put items on the top of the product.
● Do not put items, such as a container for liquid (a vase, owerpot, cosmetics or
liquid medicine), on the top of the product.
●If any water or liquid is spilled on the product, short circuit may occur and cause
re or electric shock.
●Do not tread on the product or hang any items on the product.
Do not install the product in an improper place.
●Do not install the product in humid places, such as the bathroom, the shower
room, the place near windows or outdoor environments where experience rain,
snow or other harsh weather. The product installation is also required to avoid a
place around by hot spring vapor. The preceding environments may cause faults
or electric shock under extreme conditions.
● Do not put exposed re source, such as an ignited candle, on the product.
Do not cover or block up any vents on the product.
● The overheated components may cause re, damage the product and shorten
the service life.
●Do not put the venting surface of the product facedown.
●Do not install the product on a carpet or bed clothes.
●Do not use a cloth such as table cloth to cover the product.
Do not touch the power cable with wet hands to avoid electric shock.
Altitude during operation (m): less than 5000m.
03
CAUTION
Do not install the product in high temperature environments.
●Do not install the product near heat source, such as the radiator, the heat
reservoir, the stove or other heating devices.
●Do not expose the product under sunlight, which may cause high temperature
and subsequent faults in the product.
For transport:
●Pack the product for mobility or maintenance by using the cartons and cushioning
material provided with the product.
● Vertically move the product during transport. The screen or other components
are easily broken if the product is moved by an improper way.
Keep away from the product when you use a radio.
The product design to prevent radio interference complies with the international
EMI standard. However, the interference still exists and causes noise in the radio.
●If noise occurs in the radio, try the following solutions.
●Adjust the direction of the radio antenna to avoid the interference from the product.
●Keep the radio away from the product.
Advice for watching:
●Use the product in an environment with comfortable light. It is harmful to your eyes to
watch in a too bright or too dark environment.
●Relax your eyes after a period of time for watching.
●When you are watching, the distance which is 3 to 7 times of the screen height
should be kept, and it is the best distance to protect eyes and prevent eyestrain.
●Adjust the volume to an appropriate level, especially at night.
● Use amplier equipment as the audio input source with caution. If you must use
amplier equipment, the input power should not exceed the maximum of speaker
power. Otherwise, problems occur, such as the speaker is overpowered and
damaged.
04
Installation Requirement
Bearing
Ventilation
You can choose the portable or a wall-mounting method according to your needs. The
wall mounting can substantially save the space.
If you choose portable mounting, use the mounting rack or support. If you want to
use a self-made mounting rack, the bearing capacity of the rack should be at last four
times of the screen weight. The bearing capacity of the mounting support must be four
times of the actual weight of the screen to ensure steadiness of the interactive touch
screen.
When you choose wall mounted, the bearing capacity of the mounting surface must
be at least four times of the weight of the screen. When the mounting surface is a wall
or ceiling of a building, the wall must be built with solid ricks, concrete or materials
of equal intensity. If you need to mount the screen on a loose surface such as an old
brick wall, wood plank wall, solid wall, metal or non-metal structure wall or a wall with a
thick decoration layer, take necessary consolidating measure to ensure that the screen
is steadily mounted.
Ventilation requirements Distance to the surface for installation (mm)
Nominal power Left and right sides Top Bottom Back
Greater than 100 W 100 200 200 100
WARNING
If the product is mounting inside a wall or a cabinet, in addition to the preceding
requirements, the area of ventilation holes at the bottom, top and two sides must
be at least 50% of the sealing surface to ensure proper ventilation.
05
Top ≥ 200 mm
Bottom ≥ 200 mm
Back ≥ 200 mm
Left ≥ 100 mm Right ≥ 100 mm
●When you install by wall mounting method, ensure insert the screws into the
wall deeper than 10 mm.
●Do not block ventilation vents.
●Reference to the CAS 132-2006.
●The dimension of the 4 bracket mounting holes in the back panel is VESA
MIS-F compliant (400 x 400 mm). Please use the metric M8 screws with
length of 10 to 15 mm to secure the touch screen with the mounting system.
●Please have a professional installer to install the screen.
NOTE:
06
Thank you for choosing our interactive touch screen. As our latest independently
developed and produced human-machine interactive product, the TRUTOUCH interactive
touch screen is a multi-functional display for interactive teaching, digital demonstration,
multi-media presentation, touch operations and handwriting. They are well designed
and produced to meet the needs of education and corporate applications, and provide a
user-friendly experience, digital intelligent control as an ideal equipment for schools and
companies. You can use your ngers or opaque objects to write, edit and delete any things
on the screen.
The product features are as follows:
●
●
●
●
●
●
●
●
Specially designed for teaching and meeting systems.
Adopt advanced infrared array scanning and sensing technology, HID driver-free,
meaning the product is activated soon after it is powered on.
Multi-signal sources can be previewed in the window and be switched by touching the
screen.
A special button is set to adjust the brightness automatically with no impact on
watching and save up to 50% energy.
Support front-facing high-power ampliers.
When the screen display function is disabled, the product can still play audio to save
energy.
Sense the illumination and brightness automatically to adjust the screen backlight
so that the most comfortable screen brightness can be displayed to teachers and
students.
The interactive lesson preparation and teaching system uses a new separation mode
of lesson preparation and teaching, which provides a large number of tools for teacher
to assist teaching and improve class interaction.
Introduction
07
The front view and back view of the product are displayed as follows.
Enclosure
For 65"/ 70"
For 75"/ 80"/ 86"
Control Panel
Connection Panel 2
Infrared Frame
Front Cover Plate*
Rocker Switch
Screen
Power on/off
Power Outlet
Left Loudspeaker
Right Loudspeaker
Connection Panel 3
Connection Panel 1
OPS Port
Outer Appearance
1
1
2
2
3
3
4
4
5
5
6
6
7
7
5 8
8
9
9
10
10
10
11
11
11
12
12
12
13
13
13
14
14
14
" * " indicates optional.
NOTE:
Indice
Altri manuali NewLine Pannello touch
NewLine
NewLine Trutouch X7 Manuale utente
NewLine
NewLine HO Series Manuale utente
NewLine
NewLine Trutouch X5 Manuale utente
NewLine
NewLine TRUTOUCH X9 Manuale utente
NewLine
NewLine TRUTOUCH RS Series Manuale utente
NewLine
NewLine ER Series Manuale utente
NewLine
NewLine Collaboration HO Series Manuale utente
NewLine
NewLine BNL16X5 Manuale utente
NewLine
NewLine TRUTOUCH UB Series Manuale utente
