KEYSTONE CORRECTION
Correc�ng Keystone
Use the keystone keyrtor or rte ontrtay the keystone
g
to orrkeystoning at the t
gress
EXIT
MENU
SOURCE
ENTER
BLANK
MODE
COLOR
Controllability of the Projected Image
US 09
Keystone correction, also known as keystoning, refers to adjusting the
image of a projector that is displaying an angled image. This is often an
issue when mounting a projector, as it often will be mounted above or
below the horizontal center line of the screen. This will mean that
the image will be displayed on the screen at an angle and this will
change the shape of the image to a trapezoid instead of a rectangle.
To correct this, please attempt:
Please use the Keystone Adjustment knob to adjust the vertical
keystone if the projection image shows up tilted, as shown below.
FOCUS ADJUSTMENT
There are two ways to adjust the focus. You can either adjust focus
using the remote or by using the on-screen menu.
Option1 - On-Screen Menu: In the menu go to the Setting tab, select
Focusing, and then press and hold the Left/Right button on the
projector panel (or Left/Right button on the remote) until the image is
clear. If the image does not clear and instead becomes more fuzzy,
press and hold the other button until the image clears up.
