Nexvoo DoubleView N120U Manuale utente
Nexvoo DoubleView
USB Video Bar
User Manual
（Model: N120U)
Nexvoo DoubleView N120U Collaboration System
DoubleView N120U is a compact and highly capable meeting device designed and engineered for a
medium-sized conference room.
The DoubleView N120U is a Dual-Cam all-in-one USB video bar that includes combination of cameras
(ultra-wide and telephoto lenses), high quality speaker, and 8 microphone arrays.
DoubleView N120U supports 4K ultra-definition video calls, and integrates multiple AI technologies such
as auto-framing, and speaker tracking. It allows you to experience the real large-scale conference
room-level audio and extremely shocking video effects in a medium-sized conference room.
Remote controlDoubleView N120U
12V2A
Power Adpter
x4
Mounting Bracket
and Accessories
x4
5m+1.8m USB-C cables
Nexvoo DoubleView
USB Video Bar
User Manual
（Model: N120U)
in uncertain problems.
TV TV
Mount the DoubleView N120U below the TV
when the mounting height of the lower side
of the TV is higher than 3.937ft(120cm).
Mount the DoubleView N120U above the TV
when the mounting height of the upper
side of the TV is lower than 3.937ft(120cm).
TV TV
H>3.937ft(120cm)
H<3.937ft(120cm)
0.328ft(10cm)
DoubleView N120U User Manual
DoubleView N120U
4
5
6
123
45
6
Always on
Blink slowly
Camera is off
The microphone is muted
The AI function is turned off (Blink for 3 seconds)
The device is updating the firmware.
After turned on, the device is in the initialization
Camera is on
The device is searching for the remote control.
The device is paired with the remote control successfully (Blink for 3 seconds)
The AI function is turned on (Blink for 3 seconds)
The device has saved camera preset position successfully (Blink for 3 seconds)
Blink quickly
Always on
Blink slowly
Blink quickly
Nexvoo DoubleView N120U Introduction
1
2
3
4
5
6
Power（12V/2A）
USB Type A 1
USB Type A 2
USB Type C
Bluetooth button
Kingston Lock
12V2A
Power Adpter
6 5 4
3 2
1
Using the remote control to control the equipment can achieve the desired effect.
The following figure and table identify the functions of the buttons on the remote control.
Remote Control Introduction
Paring and connection
Control function
1
32
4
6
8
5
7
9
1. Mute
2. Camera Preset 1
3. Camera Preset 2
4. Camera Switch
5. Pan and Tilt
6. Volume up/down
7. Zoom in/out
8. AI Switch
9. Bluetooth
Web Management
You can configure the Nexvoo DoubleView USB video bar on the Web management.
You can configure the following settings on the Web management.
• View device information
• The remote control configuration
• Camera tracking
• Firmware update & reset
• Change password
• Restore default settings
Note: Web management only supports Windows system.
1. After DoubleView is connected to the power, it will automatically turn on, and connect DoubleView to
your computer via USB. The computer will automatically install DoubleView USB Audio, USB Camera
and Remote NDIS drivers, then open the computer’s Device Manager to view the installed USB devices.
(Set Windows 10 system as example)
2. Select [Computer's Control Panel - Network and Internet - View Network Status and Tasks - Change
Adapter Settings], you can see the Ethernet with the device name "Remote NDIS based Internet Sharing
Device", right-click the Ethernet, select "Properties", and open [Network-Internet Protocol Version 4
(TCP/ IPv4)], then manually configure the IP address.
Network configuration
Indice
Altri manuali Nexvoo Telecamera IP
