Nibe F470 Manuale utente

UHB EN 2036-1

631088

USER MANUAL

Exhaust air heat pump

NIBE F470

Quick guide

Navigation

Ok button (confirm/select)

Back button (back/undo/exit)

Control knob (move/increase/reduce)

A detailed explanation of the button functions can be found on page 12.

How to scroll through menus and make different settings is described on

page 16.

Set the indoor climate

INDOOR CLIMATE

HEAT PUMP INFO

HOT WATER

The mode for setting the indoor temperature is accessed by pressing the OK

button twice, when in the start mode in the main menu. Read more about

the settings on page 32.

Increase hot water volume

To temporarily increase the amount of hot water, first turn the control knob

to mark menu 2 (water droplet) and then press the OK button twice. Read

more about the settings on page 46.

In event of disturbances in comfort

If a disturbance in comfort of any type occurs there are some measures that

can be taken before you need to contact your installer. See page 68 for in-

structions.

41 Important information

4Installation data

5Safety information

6Symbols

6Serial number

7F470 – An excellent choice

82 The heat pump – the heart of the house

9Heat pump function

11Contact with F470

21Maintenance of F470

313 F470 – at your service

31Set the indoor climate

45Set the hot water capacity

50Get information

54Adjust the heat pump

684 Disturbances in comfort

68Info menu

68Manage alarm

69Troubleshooting

745 Technical data

756 Glossary

80Item register

83Contact information

3Table of ContentsNIBE F470

Table of Contents

Installation data

F470Product

Serial number

Installation date

Installer

Accessories

✔

Extra shunt ECS

40/41

Docking kit DEH

40/DEH 41

Room unit RMU

Solar panels NIBE

SetFact.

sett.

NameNo.

0temperature (curve offset)1.1

9heating curve (curve

slope)

1.9.1

20min. flow line temp.1.9.3

65%fan sp. exhaust air (nor-

mal)

5.1.5

45%fan sp. supply air (normal)5.1.6

Serial number must always be given

Certification that the installation is carried out according to instructions in the accompanying

installer manual and applicable regulations.

_________________________Signed__________________Date

NIBE F470Chapter 1 | Important information4

1 Important information

Safety information

This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or in-

struction concerning use of the appliance in a safe way

and understand the hazards involved. Children shall not

play with the appliance. Cleaning and user maintenance

shall not be made by children without supervision.

Rights to make any design or technical modifications

are reserved.

©NIBE 2020.

Do not start F470 if there is a risk that the water in the

system has frozen.

Water may drip from the safety valve. A factory-fitted

overflow pipe runs from the safety valve to an overflow

cup. The overflow pipe is visible, its mouth is open and

not located close to electrical components. The safety

valve must be actuated regularly to remove dirt and to

check that it is not blocked.

If the supply cable is damaged, only NIBE, its service

representative or similar authorised person may replace

it to prevent any danger and damage.

5Chapter 1 | Important informationNIBE F470

Symbols

NOTE

This symbol indicates danger to person or machine .

Caution

This symbol indicates important information about what you

should observe when maintaining your installation.

TIP

This symbol indicates tips on how to facilitate using the product.

Serial number

The serial number can be found at the bottom right of the front cover,

in the info menu (menu 3.1) and on the type plate.

Serial number

Caution

You need the product's (14 digit) serial number for servicing

and support.

NIBE F470Chapter 1 | Important information6

F470 – An excellent choice

F470 is a heat pump, which has been developed to supply your home

with inexpensive and environmentally friendly heating in the most effi-

cient manner.

Heat production is reliable and economical, thanks to an integrated hot

water heater, immersion heater, circulation pump and control system.

The heat pump can be connected to an optional low temperature heat

distribution system. e.g. radiators, convectors or underfloor heating. It

is also prepared for connection to several different products and accessor-

ies, e.g. extra water heater and climate systems with different temper-

atures.

F470 is equipped with a control computer for good comfort, good eco-

nomy and safe operation. Clear information about status, operation time

and all temperatures in the heat pump are shown on the large and easy

to read display. This means, for example, that external unit thermometers

are not necessary.

EXCELLENT PROPERTIES FOR F470:

•Integrated water heater

There is a water heater integrated in the heat pump, which is insulated

with environmentally friendly cellular plastic for minimal heat loss.

•Scheduling the indoor comfort and hot water

Heating and hot water as well as ventilation, can be scheduled for each

day of the week or for longer periods (vacation).

•Display with user instructions

The heat pump has a large display with easy-to-understand menus that

facilitate setting a comfortable climate.

•Simple troubleshooting

In the event of a fault, the heat pump display shows what happened

and the actions to be taken.

7Chapter 1 | Important informationNIBE F470

Värmebärare

Köldmedium

Rumsluft

Uteluft

22 °C 0 °C

5 °C 0 °C

55 °C 45 °C

80 °C

Heating medium

Room air

Refrigerant

Evaporator

Condenser

Compressor

Expansion valve

Outdoor air

NIBE F470Chapter 2 | The heat pump – the heart of the house8

2 The heat pump – the heart of

the house

Heat pump function

An exhaust air heat pump utilises the heat in the building’s ventilation

air to heat up the dwelling. The ventilation air’s energy is converted to

residential heating in three different circuits. From the outgoing ventilation

air (1), heating energy is recovered from the dwelling and transported to

the heat pump. The heat pump increases the recovered heat’s low

temperature to a high temperature in the refrigerant circuit (2). The heat

is distributed around the house in the heating medium circuit (3).

Ventilation air

The hot air is transferred from the rooms to the heat pump via the house ventilation

system.

The fan then routes the air to the heat pump’s evaporator. Here, the air releases the

heating energy and the air's temperature drops significantly. The cold air is then blown

out of the house.

Refrigerant circuit

A liquid, a refrigerant, circulates in a closed system in the heat pump which also passes

the evaporator. The refrigerant has a very low boiling point. In the evaporator the refri-

gerant receives the heat energy from the ventilation air and starts to boil.

The gas that is produced during boiling is routed into an electrically powered com-

pressor. When the gas is compressed, the pressure increases and the gas’s temper-

ature increases considerably, from approx. 5°C to approx. 80°C.

From the compressor, the gas is forced into a heat exchanger, condenser, where it

releases heat energy to the heat pump’s heating section, whereupon the gas is cooled

and condenses to liquid form again.

As the pressure is still high, the refrigerant can pass an expansion valve, where the

pressure drops so that the refrigerant returns to its original temperature. The refrigerant

has now completed a full cycle. It is routed to the evaporator again and the process

is repeated.

Heat medium circuit

The heat energy that the refrigerant produces in the condenser is retrieved by the

climate system's water, heating medium, which is heated to 35 °C (supply temperat-

ure).

The hot water circulates in a closed system and is pumped out to the radiators/heating

coils of the house.

The heat pump’s integrated water heater is in the heating section. The heating medium

heats the hot water.

9Chapter 2 | The heat pump – the heart of the houseNIBE F470

Pre-heated supply air

The hot water also circulates to the heat pump’s supply air coil. The supply air coil

heats up the air that is blown out into the rooms that have supply air inlets.

The temperatures are only examples and may vary between different installations and

time of year.

NIBE F470Chapter 2 | The heat pump – the heart of the house10

Altri manuali per F470

Indice

Manuali Pompa di calore popolari di altre marche

MICROWELL

MICROWELL HP 1000 GREEN Manuale utente

Sanyo

Sanyo SAP120FCH Manuale utente

Daikin

Daikin EHYHBH05AA Manuale utente

Panasonic

Panasonic WH-SDF03E3E5 Guida

Bryant

Bryant 544B Manuale utente

Airxcel

Airxcel 45000 Series Manuale

Mitsubishi Electric

Mitsubishi Electric PUZ-SWM60VAA Manuale utente

Dimplex

Dimplex LI 16I-TUR Guida utente

Carrier

Carrier WSHP Open v3 Guida rapida alla configurazione

TGM

TGM CTV14CN018A Manuale utente

Carrier

Carrier 38MGQ Series Manuale utente

Kokido

Kokido K2O K880BX/EU Guida alla risoluzione dei problemi

Viessmann

Viessmann VITOCAL 300-G PRO Type BW 2150 Guida rapida

Carrier

Carrier 48EZN Manuale utente

Viessmann

Viessmann KWT Vitocal 350-G Pro Series Istruzioni operative

Ariston

Ariston NIMBUS Manuale utente

Weishaupt

Weishaupt WWP L 7 Guida utente

GE Zoneline AZ85H09EAC Manuale utente